From: Kishon Vijay Abraham I <kishon@ti.com>
To: "Benoît Cousson" <bcousson@baylibre.com>,
"Tony Lindgren" <tony@atomide.com>
Cc: Rob Herring <robh+dt@kernel.org>,
Kishon Vijay Abraham I <kishon@ti.com>,
<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<linux-omap@vger.kernel.org>
Subject: [PATCH 1/3] ARM: dts: am57xx-beagle-x15/am57xx-idk: Remove "gpios" for endpoint dt nodes
Date: Tue, 17 Dec 2019 14:21:22 +0530 [thread overview]
Message-ID: <20191217085124.22480-2-kishon@ti.com> (raw)
In-Reply-To: <20191217085124.22480-1-kishon@ti.com>
PERST# line in the PCIE connector is driven by the host mode and not
EP mode. The gpios property here is used for driving the PERST# line.
Remove gpios property from all endpoint device tree nodes.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
arch/arm/boot/dts/am571x-idk.dts | 4 ----
arch/arm/boot/dts/am572x-idk-common.dtsi | 4 ----
arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi | 4 ----
3 files changed, 12 deletions(-)
diff --git a/arch/arm/boot/dts/am571x-idk.dts b/arch/arm/boot/dts/am571x-idk.dts
index 820ce3b60bb6..67239f7c22b8 100644
--- a/arch/arm/boot/dts/am571x-idk.dts
+++ b/arch/arm/boot/dts/am571x-idk.dts
@@ -170,10 +170,6 @@
gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
};
-&pcie1_ep {
- gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
-};
-
&mmc1 {
pinctrl-names = "default", "hs";
pinctrl-0 = <&mmc1_pins_default_no_clk_pu>;
diff --git a/arch/arm/boot/dts/am572x-idk-common.dtsi b/arch/arm/boot/dts/am572x-idk-common.dtsi
index a064f13b3880..ddf123620e96 100644
--- a/arch/arm/boot/dts/am572x-idk-common.dtsi
+++ b/arch/arm/boot/dts/am572x-idk-common.dtsi
@@ -147,10 +147,6 @@
gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
};
-&pcie1_ep {
- gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
-};
-
&mailbox5 {
status = "okay";
mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
diff --git a/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi b/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi
index bc76f1705c0f..9a94c96b0350 100644
--- a/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi
+++ b/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi
@@ -547,10 +547,6 @@
gpios = <&gpio2 8 GPIO_ACTIVE_LOW>;
};
-&pcie1_ep {
- gpios = <&gpio2 8 GPIO_ACTIVE_LOW>;
-};
-
&mcasp3 {
#sound-dai-cells = <0>;
assigned-clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 24>;
--
2.17.1
WARNING: multiple messages have this Message-ID (diff)
From: Kishon Vijay Abraham I <kishon@ti.com>
To: "Benoît Cousson" <bcousson@baylibre.com>,
"Tony Lindgren" <tony@atomide.com>
Cc: Rob Herring <robh+dt@kernel.org>,
Kishon Vijay Abraham I <kishon@ti.com>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-omap@vger.kernel.org
Subject: [PATCH 1/3] ARM: dts: am57xx-beagle-x15/am57xx-idk: Remove "gpios" for endpoint dt nodes
Date: Tue, 17 Dec 2019 14:21:22 +0530 [thread overview]
Message-ID: <20191217085124.22480-2-kishon@ti.com> (raw)
In-Reply-To: <20191217085124.22480-1-kishon@ti.com>
PERST# line in the PCIE connector is driven by the host mode and not
EP mode. The gpios property here is used for driving the PERST# line.
Remove gpios property from all endpoint device tree nodes.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
arch/arm/boot/dts/am571x-idk.dts | 4 ----
arch/arm/boot/dts/am572x-idk-common.dtsi | 4 ----
arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi | 4 ----
3 files changed, 12 deletions(-)
diff --git a/arch/arm/boot/dts/am571x-idk.dts b/arch/arm/boot/dts/am571x-idk.dts
index 820ce3b60bb6..67239f7c22b8 100644
--- a/arch/arm/boot/dts/am571x-idk.dts
+++ b/arch/arm/boot/dts/am571x-idk.dts
@@ -170,10 +170,6 @@
gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
};
-&pcie1_ep {
- gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
-};
-
&mmc1 {
pinctrl-names = "default", "hs";
pinctrl-0 = <&mmc1_pins_default_no_clk_pu>;
diff --git a/arch/arm/boot/dts/am572x-idk-common.dtsi b/arch/arm/boot/dts/am572x-idk-common.dtsi
index a064f13b3880..ddf123620e96 100644
--- a/arch/arm/boot/dts/am572x-idk-common.dtsi
+++ b/arch/arm/boot/dts/am572x-idk-common.dtsi
@@ -147,10 +147,6 @@
gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
};
-&pcie1_ep {
- gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
-};
-
&mailbox5 {
status = "okay";
mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
diff --git a/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi b/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi
index bc76f1705c0f..9a94c96b0350 100644
--- a/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi
+++ b/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi
@@ -547,10 +547,6 @@
gpios = <&gpio2 8 GPIO_ACTIVE_LOW>;
};
-&pcie1_ep {
- gpios = <&gpio2 8 GPIO_ACTIVE_LOW>;
-};
-
&mcasp3 {
#sound-dai-cells = <0>;
assigned-clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 24>;
--
2.17.1
next prev parent reply other threads:[~2019-12-17 8:50 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-12-17 8:51 [PATCH 0/3] AM57xx: Fix bugs in device tree files Kishon Vijay Abraham I
2019-12-17 8:51 ` Kishon Vijay Abraham I
2019-12-17 8:51 ` Kishon Vijay Abraham I [this message]
2019-12-17 8:51 ` [PATCH 1/3] ARM: dts: am57xx-beagle-x15/am57xx-idk: Remove "gpios" for endpoint dt nodes Kishon Vijay Abraham I
2019-12-17 8:51 ` [PATCH 2/3] ARM: dts: am571x-idk: Fix gpios property to have the correct gpio number Kishon Vijay Abraham I
2019-12-17 8:51 ` Kishon Vijay Abraham I
2019-12-17 8:51 ` [PATCH 3/3] ARM: dts: beagle-x15-common: Model 5V0 regulator Kishon Vijay Abraham I
2019-12-17 8:51 ` Kishon Vijay Abraham I
2019-12-17 18:23 ` [PATCH 0/3] AM57xx: Fix bugs in device tree files Tony Lindgren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191217085124.22480-2-kishon@ti.com \
--to=kishon@ti.com \
--cc=bcousson@baylibre.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.