All of lore.kernel.org
 help / color / mirror / Atom feed
From: John Crispin <john@phrozen.org>
To: Kalle Valo <kvalo@codeaurora.org>
Cc: linux-wireless@vger.kernel.org, ath11k@lists.infradead.org,
	John Crispin <john@phrozen.org>
Subject: [RESEND 3/3] ath11k: switch to using ieee80211_tx_status_ext()
Date: Tue, 17 Dec 2019 21:19:09 +0100	[thread overview]
Message-ID: <20191217201909.27420-3-john@phrozen.org> (raw)
In-Reply-To: <20191217201909.27420-1-john@phrozen.org>

This allows us to pass HE rates down into the stack.

Signed-off-by: John Crispin <john@phrozen.org>
---
 drivers/net/wireless/ath/ath11k/dp_tx.c | 24 +++++++++++++++++++-----
 1 file changed, 19 insertions(+), 5 deletions(-)

diff --git a/drivers/net/wireless/ath/ath11k/dp_tx.c b/drivers/net/wireless/ath/ath11k/dp_tx.c
index 0c93b291305c..d4be307f2eba 100644
--- a/drivers/net/wireless/ath/ath11k/dp_tx.c
+++ b/drivers/net/wireless/ath/ath11k/dp_tx.c
@@ -361,9 +361,12 @@ static void ath11k_dp_tx_complete_msdu(struct ath11k *ar,
 				       struct sk_buff *msdu,
 				       struct hal_tx_status *ts)
 {
+	struct ieee80211_tx_status status = { 0 };
 	struct ath11k_base *ab = ar->ab;
 	struct ieee80211_tx_info *info;
 	struct ath11k_skb_cb *skb_cb;
+	struct ath11k_peer *peer;
+	struct ath11k_sta *arsta;
 
 	if (WARN_ON_ONCE(ts->buf_rel_source != HAL_WBM_REL_SRC_MODULE_TQM)) {
 		/* Must not happen */
@@ -427,12 +430,23 @@ static void ath11k_dp_tx_complete_msdu(struct ath11k *ar,
 		ath11k_dp_tx_cache_peer_stats(ar, msdu, ts);
 	}
 
-	/* NOTE: Tx rate status reporting. Tx completion status does not have
-	 * necessary information (for example nss) to build the tx rate.
-	 * Might end up reporting it out-of-band from HTT stats.
-	 */
 
-	ieee80211_tx_status(ar->hw, msdu);
+	spin_lock_bh(&ab->base_lock);
+	peer = ath11k_peer_find_by_id(ab, ts->peer_id);
+	if (peer) {
+		arsta = (struct ath11k_sta *)peer->sta->drv_priv;
+		status.sta = peer->sta;
+		status.skb = msdu;
+		status.info = info;
+		status.rate = &arsta->last_txrate;
+	}
+	rcu_read_unlock();
+	if (peer)
+		ieee80211_tx_status_ext(ar->hw, &status);
+	else
+		dev_kfree_skb_any(msdu);
+	spin_unlock_bh(&ab->base_lock);
+	return;
 
 exit:
 	rcu_read_unlock();
-- 
2.20.1


WARNING: multiple messages have this Message-ID (diff)
From: John Crispin <john@phrozen.org>
To: Kalle Valo <kvalo@codeaurora.org>
Cc: linux-wireless@vger.kernel.org, ath11k@lists.infradead.org,
	John Crispin <john@phrozen.org>
Subject: [RESEND 3/3] ath11k: switch to using ieee80211_tx_status_ext()
Date: Tue, 17 Dec 2019 21:19:09 +0100	[thread overview]
Message-ID: <20191217201909.27420-3-john@phrozen.org> (raw)
In-Reply-To: <20191217201909.27420-1-john@phrozen.org>

This allows us to pass HE rates down into the stack.

Signed-off-by: John Crispin <john@phrozen.org>
---
 drivers/net/wireless/ath/ath11k/dp_tx.c | 24 +++++++++++++++++++-----
 1 file changed, 19 insertions(+), 5 deletions(-)

diff --git a/drivers/net/wireless/ath/ath11k/dp_tx.c b/drivers/net/wireless/ath/ath11k/dp_tx.c
index 0c93b291305c..d4be307f2eba 100644
--- a/drivers/net/wireless/ath/ath11k/dp_tx.c
+++ b/drivers/net/wireless/ath/ath11k/dp_tx.c
@@ -361,9 +361,12 @@ static void ath11k_dp_tx_complete_msdu(struct ath11k *ar,
 				       struct sk_buff *msdu,
 				       struct hal_tx_status *ts)
 {
+	struct ieee80211_tx_status status = { 0 };
 	struct ath11k_base *ab = ar->ab;
 	struct ieee80211_tx_info *info;
 	struct ath11k_skb_cb *skb_cb;
+	struct ath11k_peer *peer;
+	struct ath11k_sta *arsta;
 
 	if (WARN_ON_ONCE(ts->buf_rel_source != HAL_WBM_REL_SRC_MODULE_TQM)) {
 		/* Must not happen */
@@ -427,12 +430,23 @@ static void ath11k_dp_tx_complete_msdu(struct ath11k *ar,
 		ath11k_dp_tx_cache_peer_stats(ar, msdu, ts);
 	}
 
-	/* NOTE: Tx rate status reporting. Tx completion status does not have
-	 * necessary information (for example nss) to build the tx rate.
-	 * Might end up reporting it out-of-band from HTT stats.
-	 */
 
-	ieee80211_tx_status(ar->hw, msdu);
+	spin_lock_bh(&ab->base_lock);
+	peer = ath11k_peer_find_by_id(ab, ts->peer_id);
+	if (peer) {
+		arsta = (struct ath11k_sta *)peer->sta->drv_priv;
+		status.sta = peer->sta;
+		status.skb = msdu;
+		status.info = info;
+		status.rate = &arsta->last_txrate;
+	}
+	rcu_read_unlock();
+	if (peer)
+		ieee80211_tx_status_ext(ar->hw, &status);
+	else
+		dev_kfree_skb_any(msdu);
+	spin_unlock_bh(&ab->base_lock);
+	return;
 
 exit:
 	rcu_read_unlock();
-- 
2.20.1


_______________________________________________
ath11k mailing list
ath11k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath11k

  parent reply	other threads:[~2019-12-17 20:19 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-12-17 20:19 [RESEND 1/3] ath11k: drop tx_info from ath11k_sta John Crispin
2019-12-17 20:19 ` John Crispin
2019-12-17 20:19 ` [RESEND 2/3] ath11k: add HE rate accounting to driver John Crispin
2019-12-17 20:19   ` John Crispin
2019-12-17 20:19 ` John Crispin [this message]
2019-12-17 20:19   ` [RESEND 3/3] ath11k: switch to using ieee80211_tx_status_ext() John Crispin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191217201909.27420-3-john@phrozen.org \
    --to=john@phrozen.org \
    --cc=ath11k@lists.infradead.org \
    --cc=kvalo@codeaurora.org \
    --cc=linux-wireless@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.