From: Geert Uytterhoeven <geert+renesas@glider.be> To: Linus Walleij <linus.walleij@linaro.org>, Yoshinori Sato <ysato@users.sourceforge.jp>, Rich Felker <dalias@libc.org> Cc: linux-renesas-soc@vger.kernel.org, linux-sh@vger.kernel.org, linux-gpio@vger.kernel.org, Geert Uytterhoeven <geert+renesas@glider.be> Subject: [PATCH 1/6] pinctrl: sh-pfc: r8a7778: Fix duplicate SDSELF_B and SD1_CLK_B Date: Wed, 18 Dec 2019 19:48:07 +0000 [thread overview] Message-ID: <20191218194812.12741-2-geert+renesas@glider.be> (raw) In-Reply-To: <20191218194812.12741-1-geert+renesas@glider.be> The FN_SDSELF_B and FN_SD1_CLK_B enum IDs are used twice, which means one set of users must be wrong. Replace them by the correct enum IDs. Fixes: 87f8c988636db0d4 ("sh-pfc: Add r8a7778 pinmux support") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> --- The runtime-check under development reports: r8a7778_pfc: config reg 0xfffc002c/54 enum_id 613 conflict r8a7778_pfc: config reg 0xfffc002c/70 enum_id 607 conflict --- drivers/pinctrl/sh-pfc/pfc-r8a7778.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/pinctrl/sh-pfc/pfc-r8a7778.c b/drivers/pinctrl/sh-pfc/pfc-r8a7778.c index 24866a5958aee512..a9875038ed9b664e 100644 --- a/drivers/pinctrl/sh-pfc/pfc-r8a7778.c +++ b/drivers/pinctrl/sh-pfc/pfc-r8a7778.c @@ -2305,7 +2305,7 @@ static const struct pinmux_cfg_reg pinmux_config_regs[] = { FN_ATAG0_A, 0, FN_REMOCON_B, 0, /* IP0_11_8 [4] */ FN_SD1_DAT2_A, FN_MMC_D2, 0, FN_BS, - FN_ATADIR0_A, 0, FN_SDSELF_B, 0, + FN_ATADIR0_A, 0, FN_SDSELF_A, 0, FN_PWM4_B, 0, 0, 0, 0, 0, 0, 0, /* IP0_7_5 [3] */ @@ -2349,7 +2349,7 @@ static const struct pinmux_cfg_reg pinmux_config_regs[] = { FN_TS_SDAT0_A, 0, 0, 0, 0, 0, 0, 0, /* IP1_10_8 [3] */ - FN_SD1_CLK_B, FN_MMC_D6, 0, FN_A24, + FN_SD1_CD_A, FN_MMC_D6, 0, FN_A24, FN_DREQ1_A, 0, FN_HRX0_B, FN_TS_SPSYNC0_A, /* IP1_7_5 [3] */ FN_A23, FN_HTX0_B, FN_TX2_B, FN_DACK2_A, -- 2.17.1
WARNING: multiple messages have this Message-ID (diff)
From: Geert Uytterhoeven <geert+renesas@glider.be> To: Linus Walleij <linus.walleij@linaro.org>, Yoshinori Sato <ysato@users.sourceforge.jp>, Rich Felker <dalias@libc.org> Cc: linux-renesas-soc@vger.kernel.org, linux-sh@vger.kernel.org, linux-gpio@vger.kernel.org, Geert Uytterhoeven <geert+renesas@glider.be> Subject: [PATCH 1/6] pinctrl: sh-pfc: r8a7778: Fix duplicate SDSELF_B and SD1_CLK_B Date: Wed, 18 Dec 2019 20:48:07 +0100 [thread overview] Message-ID: <20191218194812.12741-2-geert+renesas@glider.be> (raw) In-Reply-To: <20191218194812.12741-1-geert+renesas@glider.be> The FN_SDSELF_B and FN_SD1_CLK_B enum IDs are used twice, which means one set of users must be wrong. Replace them by the correct enum IDs. Fixes: 87f8c988636db0d4 ("sh-pfc: Add r8a7778 pinmux support") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> --- The runtime-check under development reports: r8a7778_pfc: config reg 0xfffc002c/54 enum_id 613 conflict r8a7778_pfc: config reg 0xfffc002c/70 enum_id 607 conflict --- drivers/pinctrl/sh-pfc/pfc-r8a7778.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/pinctrl/sh-pfc/pfc-r8a7778.c b/drivers/pinctrl/sh-pfc/pfc-r8a7778.c index 24866a5958aee512..a9875038ed9b664e 100644 --- a/drivers/pinctrl/sh-pfc/pfc-r8a7778.c +++ b/drivers/pinctrl/sh-pfc/pfc-r8a7778.c @@ -2305,7 +2305,7 @@ static const struct pinmux_cfg_reg pinmux_config_regs[] = { FN_ATAG0_A, 0, FN_REMOCON_B, 0, /* IP0_11_8 [4] */ FN_SD1_DAT2_A, FN_MMC_D2, 0, FN_BS, - FN_ATADIR0_A, 0, FN_SDSELF_B, 0, + FN_ATADIR0_A, 0, FN_SDSELF_A, 0, FN_PWM4_B, 0, 0, 0, 0, 0, 0, 0, /* IP0_7_5 [3] */ @@ -2349,7 +2349,7 @@ static const struct pinmux_cfg_reg pinmux_config_regs[] = { FN_TS_SDAT0_A, 0, 0, 0, 0, 0, 0, 0, /* IP1_10_8 [3] */ - FN_SD1_CLK_B, FN_MMC_D6, 0, FN_A24, + FN_SD1_CD_A, FN_MMC_D6, 0, FN_A24, FN_DREQ1_A, 0, FN_HRX0_B, FN_TS_SPSYNC0_A, /* IP1_7_5 [3] */ FN_A23, FN_HTX0_B, FN_TX2_B, FN_DACK2_A, -- 2.17.1
next prev parent reply other threads:[~2019-12-18 19:48 UTC|newest] Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top 2019-12-18 19:48 [PATCH 0/6] pinctrl: sh-pfc: More miscellenaous fixes Geert Uytterhoeven 2019-12-18 19:48 ` Geert Uytterhoeven 2019-12-18 19:48 ` Geert Uytterhoeven [this message] 2019-12-18 19:48 ` [PATCH 1/6] pinctrl: sh-pfc: r8a7778: Fix duplicate SDSELF_B and SD1_CLK_B Geert Uytterhoeven 2019-12-18 19:48 ` [PATCH 2/6] pinctrl: sh-pfc: sh7264: Fix Port K I/O Register 0 definition Geert Uytterhoeven 2019-12-18 19:48 ` Geert Uytterhoeven 2019-12-18 19:48 ` [PATCH 3/6] pinctrl: sh-pfc: sh7264: Fix CAN function GPIOs Geert Uytterhoeven 2019-12-18 19:48 ` Geert Uytterhoeven 2019-12-18 19:48 ` [PATCH 4/6] pinctrl: sh-pfc: sh7269: " Geert Uytterhoeven 2019-12-18 19:48 ` Geert Uytterhoeven 2019-12-18 19:48 ` [PATCH 5/6] sh: sh7264: Remove bogus SSU GPIO function definitions Geert Uytterhoeven 2019-12-18 19:48 ` Geert Uytterhoeven 2019-12-18 19:48 ` [PATCH 6/6] sh: sh7269: " Geert Uytterhoeven 2019-12-18 19:48 ` Geert Uytterhoeven
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20191218194812.12741-2-geert+renesas@glider.be \ --to=geert+renesas@glider.be \ --cc=dalias@libc.org \ --cc=linus.walleij@linaro.org \ --cc=linux-gpio@vger.kernel.org \ --cc=linux-renesas-soc@vger.kernel.org \ --cc=linux-sh@vger.kernel.org \ --cc=ysato@users.sourceforge.jp \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.