From: Bjorn Andersson <bjorn.andersson@linaro.org>
To: Andy Gross <agross@kernel.org>,
Bjorn Andersson <bjorn.andersson@linaro.org>,
Kishon Vijay Abraham I <kishon@ti.com>,
Vinod Koul <vkoul@kernel.org>
Cc: linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org,
devicetree@vger.kernel.org
Subject: [PATCH v2 2/2] arm64: dts: qcom: msm8996: Use generic QMP driver for UFS
Date: Thu, 19 Dec 2019 22:03:04 -0800 [thread overview]
Message-ID: <20191220060304.1867795-3-bjorn.andersson@linaro.org> (raw)
In-Reply-To: <20191220060304.1867795-1-bjorn.andersson@linaro.org>
With support for the MSM8996 UFS PHY added to the common QMP driver,
migrate the DTS to use the common QMP binding.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---
Changes since v1:
- None
arch/arm64/boot/dts/qcom/msm8996.dtsi | 33 +++++++++++++++------------
1 file changed, 18 insertions(+), 15 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index b302d2451007..330a1e7cb7d8 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -1323,27 +1323,30 @@ spmi_bus: qcom,spmi@400f000 {
#interrupt-cells = <4>;
};
- ufsphy: phy@627000 {
- compatible = "qcom,msm8996-ufs-phy-qmp-14nm";
- reg = <0x627000 0xda8>;
- reg-names = "phy_mem";
- #phy-cells = <0>;
+ ufs_phy: phy@627000 {
+ compatible = "qcom,msm8996-qmp-ufs-phy";
+ reg = <0x00627000 0x1c4>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
vdda-phy-supply = <&pm8994_l28>;
vdda-pll-supply = <&pm8994_l12>;
-
- vdda-phy-max-microamp = <18380>;
- vdda-pll-max-microamp = <9440>;
-
vddp-ref-clk-supply = <&pm8994_l25>;
- vddp-ref-clk-max-microamp = <100>;
- vddp-ref-clk-always-on;
- clock-names = "ref_clk_src", "ref_clk";
- clocks = <&rpmcc RPM_SMD_LN_BB_CLK>,
- <&gcc GCC_UFS_CLKREF_CLK>;
+ clocks = <&gcc GCC_UFS_CLKREF_CLK>;
+ clock-names = "ref";
+
resets = <&ufshc 0>;
+ reset-names = "ufsphy";
status = "disabled";
+
+ ufs_phy_lane: lanes@627400 {
+ reg = <0x627400 0x12c>,
+ <0x627600 0x200>,
+ <0x627c00 0x1b4>;
+ #phy-cells = <0>;
+ };
};
ufshc: ufshc@624000 {
@@ -1351,7 +1354,7 @@ ufshc: ufshc@624000 {
reg = <0x624000 0x2500>;
interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
- phys = <&ufsphy>;
+ phys = <&ufs_phy_lane>;
phy-names = "ufsphy";
vcc-supply = <&pm8994_l20>;
--
2.24.0
next prev parent reply other threads:[~2019-12-20 6:03 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-12-20 6:03 [PATCH v2 0/2] phy: qcom-qmp: Add MSM8996 UFS QMP support Bjorn Andersson
2019-12-20 6:03 ` [PATCH v2 1/2] " Bjorn Andersson
2019-12-20 6:03 ` Bjorn Andersson [this message]
2019-12-20 7:55 ` [PATCH v2 0/2] " Vinod Koul
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191220060304.1867795-3-bjorn.andersson@linaro.org \
--to=bjorn.andersson@linaro.org \
--cc=agross@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=kishon@ti.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.