[PATCH v3] arm64: dts: meson-a1: add I2C nodes

[Jian Hu <jian.hu@amlogic.com>]

There are four I2C controllers in A1 series,
Share the same comptible with AXG. Compared to AXG,
Drive strength feature is newly added in A1.

Signed-off-by: Jian Hu <jian.hu@amlogic.com>

---
This patch depends on A1 clock patchset at [0][3]

Changes since v1 at [1]:
-change reg length to 0x20
-assign i2c bus alias in dts file
-add new feature note compared to AXG in changelog

Changes since v2 at [2]:
-remove the dependence the commit description
-remove i2c alias in dtsi
-reorder the i2c nodes
-reorder the i2c pins

[0] https://lkml.kernel.org/r/20191206074052.15557-1-jian.hu@amlogic.com
[1] https://lkml.kernel.org/r/20191202111253.94872-1-jian.hu@amlogic.com
[2] https://lkml.kernel.org/r/20191211032802.83309-1-jian.hu@amlogic.com
[3] https://lkml.kernel.org/r/20191206074052.15557-1-jian.hu@amlogic.com
---
---
 arch/arm64/boot/dts/amlogic/meson-a1.dtsi | 142 ++++++++++++++++++++++
 1 file changed, 142 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/meson-a1.dtsi b/arch/arm64/boot/dts/amlogic/meson-a1.dtsi
index eab2ecd36aa8..1542eeee699d 100644
--- a/arch/arm64/boot/dts/amlogic/meson-a1.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-a1.dtsi
@@ -117,6 +117,16 @@
 				};
 			};
 
+			i2c0: i2c@1400 {
+				compatible = "amlogic,meson-axg-i2c";
+				reg = <0x0 0x1400 0x0 0x20>;
+				interrupts = <GIC_SPI 32 IRQ_TYPE_EDGE_RISING>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&clkc_periphs CLKID_I2C_M_A>;
+				status = "disabled";
+			};
+
 			uart_AO: serial@1c00 {
 				compatible = "amlogic,meson-gx-uart",
 					     "amlogic,meson-ao-uart";
@@ -136,6 +146,36 @@
 				clock-names = "xtal", "pclk", "baud";
 				status = "disabled";
 			};
+
+			i2c1: i2c@5c00 {
+				compatible = "amlogic,meson-axg-i2c";
+				reg = <0x0 0x5c00 0x0 0x20>;
+				interrupts = <GIC_SPI 68 IRQ_TYPE_EDGE_RISING>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&clkc_periphs CLKID_I2C_M_B>;
+				status = "disabled";
+			};
+
+			i2c2: i2c@6800 {
+				compatible = "amlogic,meson-axg-i2c";
+				reg = <0x0 0x6800 0x0 0x20>;
+				interrupts = <GIC_SPI 76 IRQ_TYPE_EDGE_RISING>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&clkc_periphs CLKID_I2C_M_C>;
+				status = "disabled";
+			};
+
+			i2c3: i2c@6c00 {
+				compatible = "amlogic,meson-axg-i2c";
+				reg = <0x0 0x6c00 0x0 0x20>;
+				interrupts = <GIC_SPI 78 IRQ_TYPE_EDGE_RISING>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&clkc_periphs CLKID_I2C_M_D>;
+				status = "disabled";
+			};
 		};
 
 		gic: interrupt-controller@ff901000 {
@@ -171,3 +211,105 @@
 		#clock-cells = <0>;
 	};
 };
+
+&periphs_pinctrl {
+	i2c0_f9_pins:i2c0-f9 {
+		mux {
+			groups = "i2c0_sck_f9",
+				"i2c0_sda_f10";
+			function = "i2c0";
+			bias-pull-up;
+			drive-strength-microamp = <3000>;
+		};
+	};
+
+	i2c0_f11_pins:i2c0-f11 {
+		mux {
+			groups = "i2c0_sck_f11",
+				"i2c0_sda_f12";
+			function = "i2c0";
+			bias-pull-up;
+			drive-strength-microamp = <3000>;
+		};
+	};
+
+	i2c1_a_pins:i2c1-a {
+		mux {
+			groups = "i2c1_sck_a",
+				"i2c1_sda_a";
+			function = "i2c1";
+			bias-pull-up;
+			drive-strength-microamp = <3000>;
+		};
+	};
+
+	i2c1_x_pins:i2c1-x {
+		mux {
+			groups = "i2c1_sck_x",
+				"i2c1_sda_x";
+			function = "i2c1";
+			bias-pull-up;
+			drive-strength-microamp = <3000>;
+		};
+	};
+
+	i2c2_a4_pins:i2c2-a4 {
+		mux {
+			groups = "i2c2_sck_a4",
+				"i2c2_sda_a5";
+			function = "i2c2";
+			bias-pull-up;
+			drive-strength-microamp = <3000>;
+		};
+	};
+
+	i2c2_a8_pins:i2c2-a8 {
+		mux {
+			groups = "i2c2_sck_a8",
+				"i2c2_sda_a9";
+			function = "i2c2";
+			bias-pull-up;
+			drive-strength-microamp = <3000>;
+		};
+	};
+
+	i2c2_x0_pins:i2c2-x0 {
+		mux {
+			groups = "i2c2_sck_x0",
+				"i2c2_sda_x1";
+			function = "i2c2";
+			bias-pull-up;
+			drive-strength-microamp = <3000>;
+		};
+	};
+
+	i2c2_x15_pins:i2c2-x15 {
+		mux {
+			groups = "i2c2_sck_x15",
+				"i2c2_sda_x16";
+			function = "i2c2";
+			bias-pull-up;
+			drive-strength-microamp = <3000>;
+		};
+	};
+
+	i2c3_f_pins:i2c3-f {
+		mux {
+			groups = "i2c3_sck_f",
+				"i2c3_sda_f";
+			function = "i2c3";
+			bias-pull-up;
+			drive-strength-microamp = <3000>;
+		};
+	};
+
+	i2c3_x_pins:i2c3-x {
+		mux {
+			groups = "i2c3_sck_x",
+				"i2c3_sda_x";
+			function = "i2c3";
+			bias-pull-up;
+			drive-strength-microamp = <3000>;
+		};
+	};
+};
-- 
2.24.0