From: Markus Reichl <m.reichl@fivetechno.de> To: linux-rockchip@lists.infradead.org Cc: Markus Reichl <m.reichl@fivetechno.de>, "Angus Ainslie (Purism)" <angus@akkea.ca>, devicetree@vger.kernel.org, Heiko Stuebner <heiko@sntech.de>, Jagan Teki <jagan@amarulasolutions.com>, Laurent Pinchart <laurent.pinchart@ideasonboard.com>, Linus Walleij <linus.walleij@linaro.org>, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, Maxime Ripard <mripard@kernel.org>, Rob Herring <robh@kernel.org>, Shawn Guo <shawnguo@kernel.org>, Stephan Gerhold <stephan@gerhold.net> Subject: [PATCH 0/5] regulator: mp8859: add driver for DC/DC converter used on rk3399-roc-pc board Date: Sat, 4 Jan 2020 16:32:44 +0100 [thread overview] Message-ID: <20200104153321.6584-1-m.reichl@fivetechno.de> (raw) On rk3399-roc-pc board a voltage regulator MP8859 from Monolithic Power Systems is used to supply the 12V power line. This delivers 5V as a default value after boot. The voltage is controllable via I2C. Add a basic driver to set and get the voltage of the MP8859 and add a matching node with fixed 12V in the DT of the board. Markus Reichl (5): regulator: mp8859: add driver regulator: mp8859: add config option and build entry dt-bindings: add vendor Monolithic Power Systems dt-bindings: regulator: add MPS mp8859 voltage regulator arm64: dts: rockchip: Enable mp8859 regulator on rk3399-roc-pc .../devicetree/bindings/regulator/mp8859.txt | 22 +++ .../devicetree/bindings/vendor-prefixes.yaml | 2 + .../boot/dts/rockchip/rk3399-roc-pc.dtsi | 32 ++-- drivers/regulator/Kconfig | 11 ++ drivers/regulator/Makefile | 1 + drivers/regulator/mp8859.c | 156 ++++++++++++++++++ 6 files changed, 210 insertions(+), 14 deletions(-) create mode 100644 Documentation/devicetree/bindings/regulator/mp8859.txt create mode 100644 drivers/regulator/mp8859.c -- 2.24.1
WARNING: multiple messages have this Message-ID (diff)
From: Markus Reichl <m.reichl@fivetechno.de> To: linux-rockchip@lists.infradead.org Cc: devicetree@vger.kernel.org, Heiko Stuebner <heiko@sntech.de>, Stephan Gerhold <stephan@gerhold.net>, Rob Herring <robh@kernel.org>, Linus Walleij <linus.walleij@linaro.org>, "Angus Ainslie \(Purism\)" <angus@akkea.ca>, linux-kernel@vger.kernel.org, Maxime Ripard <mripard@kernel.org>, Markus Reichl <m.reichl@fivetechno.de>, Laurent Pinchart <laurent.pinchart@ideasonboard.com>, Shawn Guo <shawnguo@kernel.org>, linux-arm-kernel@lists.infradead.org, Jagan Teki <jagan@amarulasolutions.com> Subject: [PATCH 0/5] regulator: mp8859: add driver for DC/DC converter used on rk3399-roc-pc board Date: Sat, 4 Jan 2020 16:32:44 +0100 [thread overview] Message-ID: <20200104153321.6584-1-m.reichl@fivetechno.de> (raw) On rk3399-roc-pc board a voltage regulator MP8859 from Monolithic Power Systems is used to supply the 12V power line. This delivers 5V as a default value after boot. The voltage is controllable via I2C. Add a basic driver to set and get the voltage of the MP8859 and add a matching node with fixed 12V in the DT of the board. Markus Reichl (5): regulator: mp8859: add driver regulator: mp8859: add config option and build entry dt-bindings: add vendor Monolithic Power Systems dt-bindings: regulator: add MPS mp8859 voltage regulator arm64: dts: rockchip: Enable mp8859 regulator on rk3399-roc-pc .../devicetree/bindings/regulator/mp8859.txt | 22 +++ .../devicetree/bindings/vendor-prefixes.yaml | 2 + .../boot/dts/rockchip/rk3399-roc-pc.dtsi | 32 ++-- drivers/regulator/Kconfig | 11 ++ drivers/regulator/Makefile | 1 + drivers/regulator/mp8859.c | 156 ++++++++++++++++++ 6 files changed, 210 insertions(+), 14 deletions(-) create mode 100644 Documentation/devicetree/bindings/regulator/mp8859.txt create mode 100644 drivers/regulator/mp8859.c -- 2.24.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2020-01-04 15:33 UTC|newest] Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top 2020-01-04 15:32 Markus Reichl [this message] 2020-01-04 15:32 ` [PATCH 0/5] regulator: mp8859: add driver for DC/DC converter used on rk3399-roc-pc board Markus Reichl 2020-01-04 15:32 ` [PATCH 1/5] regulator: mp8859: add driver Markus Reichl 2020-01-06 20:45 ` Mark Brown 2020-01-06 20:52 ` Markus Reichl 2020-01-06 20:52 ` Markus Reichl 2020-01-04 15:32 ` [PATCH 2/5] regulator: mp8859: add config option and build entry Markus Reichl 2020-01-04 15:32 ` [PATCH 3/5] dt-bindings: add vendor Monolithic Power Systems Markus Reichl 2020-01-04 15:32 ` [PATCH 4/5] dt-bindings: regulator: add MPS mp8859 voltage regulator Markus Reichl 2020-01-04 15:32 ` [PATCH 5/5] arm64: dts: rockchip: Enable mp8859 regulator on rk3399-roc-pc Markus Reichl 2020-01-04 15:32 ` Markus Reichl 2020-01-04 21:23 ` Heiko Stuebner 2020-01-04 21:23 ` Heiko Stuebner 2020-01-05 9:16 ` Markus Reichl 2020-01-05 9:16 ` Markus Reichl 2020-01-04 21:19 ` [PATCH 0/5] regulator: mp8859: add driver for DC/DC converter used on rk3399-roc-pc board Heiko Stuebner 2020-01-04 21:19 ` Heiko Stuebner 2020-01-06 21:16 Markus Reichl 2020-01-06 21:16 ` Markus Reichl
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20200104153321.6584-1-m.reichl@fivetechno.de \ --to=m.reichl@fivetechno.de \ --cc=angus@akkea.ca \ --cc=devicetree@vger.kernel.org \ --cc=heiko@sntech.de \ --cc=jagan@amarulasolutions.com \ --cc=laurent.pinchart@ideasonboard.com \ --cc=linus.walleij@linaro.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-rockchip@lists.infradead.org \ --cc=mripard@kernel.org \ --cc=robh@kernel.org \ --cc=shawnguo@kernel.org \ --cc=stephan@gerhold.net \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.