From: Markus Reichl <m.reichl@fivetechno.de> To: linux-rockchip@lists.infradead.org, Liam Girdwood <lgirdwood@gmail.com>, Mark Brown <broonie@kernel.org>, Rob Herring <robh+dt@kernel.org>, Mark Rutland <mark.rutland@arm.com>, Heiko Stuebner <heiko@sntech.de> Cc: Markus Reichl <m.reichl@fivetechno.de>, linux-kernel@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org Subject: [PATCH 5/5] arm64: dts: rockchip: Enable mp8859 regulator on rk3399-roc-pc Date: Mon, 6 Jan 2020 22:16:28 +0100 [thread overview] Message-ID: <20200106211633.2882-6-m.reichl@fivetechno.de> (raw) In-Reply-To: <20200106211633.2882-1-m.reichl@fivetechno.de> The rk3399-roc-pc uses a MP8859 DC/DC converter for 12V supply. This supplies 5V only in default state after booting. Now we can control the output voltage via I2C interface. Add a node for the driver to reach 12V. Signed-off-by: Markus Reichl <m.reichl@fivetechno.de> --- .../boot/dts/rockchip/rk3399-roc-pc.dtsi | 32 +++++++++++-------- 1 file changed, 18 insertions(+), 14 deletions(-) diff --git a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi index 8e01b04144b7..9f225e9c3d54 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi @@ -110,20 +110,6 @@ vcc_vbus_typec0: vcc-vbus-typec0 { regulator-max-microvolt = <5000000>; }; - /* - * should be placed inside mp8859, but not until mp8859 has - * its own dt-binding. - */ - dc_12v: mp8859-dcdc1 { - compatible = "regulator-fixed"; - regulator-name = "dc_12v"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <12000000>; - regulator-max-microvolt = <12000000>; - vin-supply = <&vcc_vbus_typec0>; - }; - /* switched by pmic_sleep */ vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 { compatible = "regulator-fixed"; @@ -546,6 +532,24 @@ fusb0: usb-typec@22 { vbus-supply = <&vcc_vbus_typec0>; status = "okay"; }; + + mp8859: regulator@66 { + compatible = "mps,mp8859"; + reg = <0x66>; + dc_12v: mp8859_dcdc { + regulator-name = "dc_12v"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc_vbus_typec0>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <12000000>; + }; + }; + }; }; &i2s0 { -- 2.24.1
WARNING: multiple messages have this Message-ID (diff)
From: Markus Reichl <m.reichl@fivetechno.de> To: linux-rockchip@lists.infradead.org, Liam Girdwood <lgirdwood@gmail.com>, Mark Brown <broonie@kernel.org>, Rob Herring <robh+dt@kernel.org>, Mark Rutland <mark.rutland@arm.com>, Heiko Stuebner <heiko@sntech.de> Cc: Markus Reichl <m.reichl@fivetechno.de>, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org Subject: [PATCH 5/5] arm64: dts: rockchip: Enable mp8859 regulator on rk3399-roc-pc Date: Mon, 6 Jan 2020 22:16:28 +0100 [thread overview] Message-ID: <20200106211633.2882-6-m.reichl@fivetechno.de> (raw) In-Reply-To: <20200106211633.2882-1-m.reichl@fivetechno.de> The rk3399-roc-pc uses a MP8859 DC/DC converter for 12V supply. This supplies 5V only in default state after booting. Now we can control the output voltage via I2C interface. Add a node for the driver to reach 12V. Signed-off-by: Markus Reichl <m.reichl@fivetechno.de> --- .../boot/dts/rockchip/rk3399-roc-pc.dtsi | 32 +++++++++++-------- 1 file changed, 18 insertions(+), 14 deletions(-) diff --git a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi index 8e01b04144b7..9f225e9c3d54 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi @@ -110,20 +110,6 @@ vcc_vbus_typec0: vcc-vbus-typec0 { regulator-max-microvolt = <5000000>; }; - /* - * should be placed inside mp8859, but not until mp8859 has - * its own dt-binding. - */ - dc_12v: mp8859-dcdc1 { - compatible = "regulator-fixed"; - regulator-name = "dc_12v"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <12000000>; - regulator-max-microvolt = <12000000>; - vin-supply = <&vcc_vbus_typec0>; - }; - /* switched by pmic_sleep */ vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 { compatible = "regulator-fixed"; @@ -546,6 +532,24 @@ fusb0: usb-typec@22 { vbus-supply = <&vcc_vbus_typec0>; status = "okay"; }; + + mp8859: regulator@66 { + compatible = "mps,mp8859"; + reg = <0x66>; + dc_12v: mp8859_dcdc { + regulator-name = "dc_12v"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc_vbus_typec0>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <12000000>; + }; + }; + }; }; &i2s0 { -- 2.24.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2020-01-06 21:17 UTC|newest] Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top 2020-01-06 21:16 [PATCH 0/5] regulator: mp8859: add driver for DC/DC converter used on rk3399-roc-pc board Markus Reichl 2020-01-06 21:16 ` Markus Reichl 2020-01-06 21:16 ` [PATCH 1/5] regulator: mp8859: add driver Markus Reichl 2020-01-06 21:16 ` Markus Reichl 2020-01-08 15:59 ` Applied "regulator: mp8859: add driver" to the regulator tree Mark Brown 2020-01-08 15:59 ` Mark Brown 2020-01-08 15:59 ` Mark Brown 2020-01-06 21:16 ` [PATCH 2/5] regulator: mp8859: add config option and build entry Markus Reichl 2020-01-06 21:16 ` Markus Reichl 2020-01-06 21:22 ` Heiko Stübner 2020-01-06 21:22 ` Heiko Stübner 2020-01-06 21:22 ` Heiko Stübner 2020-01-07 7:29 ` Markus Reichl 2020-01-07 7:29 ` Markus Reichl 2020-01-08 15:58 ` Applied "regulator: mp8859: add config option and build entry" to the regulator tree Mark Brown 2020-01-08 15:58 ` Mark Brown 2020-01-08 15:58 ` Mark Brown 2020-01-06 21:16 ` [PATCH 3/5] dt-bindings: add vendor Monolithic Power Systems Markus Reichl 2020-01-06 21:16 ` Markus Reichl 2020-01-08 20:32 ` Rob Herring 2020-01-08 20:32 ` Rob Herring 2020-01-08 20:32 ` Rob Herring 2020-01-06 21:16 ` [PATCH 4/5] dt-bindings: regulator: add MPS mp8859 voltage regulator Markus Reichl 2020-01-06 21:16 ` Markus Reichl 2020-01-08 15:58 ` Applied "regulator: bindings: add MPS mp8859 voltage regulator" to the regulator tree Mark Brown 2020-01-08 15:58 ` Mark Brown 2020-01-08 15:58 ` Mark Brown 2020-01-06 21:16 ` Markus Reichl [this message] 2020-01-06 21:16 ` [PATCH 5/5] arm64: dts: rockchip: Enable mp8859 regulator on rk3399-roc-pc Markus Reichl 2020-01-08 23:30 ` Heiko Stuebner 2020-01-08 23:30 ` Heiko Stuebner 2020-01-08 23:30 ` Heiko Stuebner -- strict thread matches above, loose matches on Subject: below -- 2020-01-04 15:32 [PATCH 0/5] regulator: mp8859: add driver for DC/DC converter used on rk3399-roc-pc board Markus Reichl 2020-01-04 15:32 ` [PATCH 5/5] arm64: dts: rockchip: Enable mp8859 regulator on rk3399-roc-pc Markus Reichl 2020-01-04 15:32 ` Markus Reichl 2020-01-04 21:23 ` Heiko Stuebner 2020-01-04 21:23 ` Heiko Stuebner 2020-01-05 9:16 ` Markus Reichl 2020-01-05 9:16 ` Markus Reichl
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20200106211633.2882-6-m.reichl@fivetechno.de \ --to=m.reichl@fivetechno.de \ --cc=broonie@kernel.org \ --cc=devicetree@vger.kernel.org \ --cc=heiko@sntech.de \ --cc=lgirdwood@gmail.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-rockchip@lists.infradead.org \ --cc=mark.rutland@arm.com \ --cc=robh+dt@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.