[RFC PATCH hwmon-next v1 3/5] hwmon: (pmbus/tps53679) Extend device list supported by driver

[Vadim Pasternak <vadimp@mellanox.com>]

Extends driver with support of the additional devices:
Texas Instruments Dual channel DCAP+ multiphase controllers: TPS53688.

Extend Kconfig with added device.

Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
---
 drivers/hwmon/pmbus/Kconfig    | 4 ++--
 drivers/hwmon/pmbus/tps53679.c | 2 ++
 2 files changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig
index 59859979571d..0dd30b07bf18 100644
--- a/drivers/hwmon/pmbus/Kconfig
+++ b/drivers/hwmon/pmbus/Kconfig
@@ -200,10 +200,10 @@ config SENSORS_TPS40422
 	  be called tps40422.
 
 config SENSORS_TPS53679
-	tristate "TI TPS53679"
+	tristate "TI TPS53679, TPS53688"
 	help
 	  If you say yes here you get hardware monitoring support for TI
-	  TPS53679.
+	  TPS53679, TPS53688
 
 	  This driver can also be built as a module. If so, the module will
 	  be called tps53679.
diff --git a/drivers/hwmon/pmbus/tps53679.c b/drivers/hwmon/pmbus/tps53679.c
index 163e8c6aaa8e..9c22e9013dd7 100644
--- a/drivers/hwmon/pmbus/tps53679.c
+++ b/drivers/hwmon/pmbus/tps53679.c
@@ -85,6 +85,7 @@ static int tps53679_probe(struct i2c_client *client,
 
 static const struct i2c_device_id tps53679_id[] = {
 	{"tps53679", 0},
+	{"tps53688", 0},
 	{}
 };
 
@@ -92,6 +93,7 @@ MODULE_DEVICE_TABLE(i2c, tps53679_id);
 
 static const struct of_device_id __maybe_unused tps53679_of_match[] = {
 	{.compatible = "ti,tps53679"},
+	{.compatible = "ti,tps53688"},
 	{}
 };
 MODULE_DEVICE_TABLE(of, tps53679_of_match);
-- 
2.11.0