From: Jagan Teki <jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org> To: Kever Yang <kever.yang-TNX95d0MmH7DzftRWevZcw@public.gmane.org>, Simon Glass <sjg-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>, Philipp Tomsich <philipp.tomsich-SN7IsUiht6C/RdPyistoZJqQE7yCjDx5@public.gmane.org> Cc: u-boot-0aAXYlwwYIKGBzrmiIFOJg@public.gmane.org, linux-amarula-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org, Jagan Teki <jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>, linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org Subject: [PATCH v4 5/8] rockchip: rk3399: Add bootcount support Date: Thu, 9 Jan 2020 14:22:19 +0530 [thread overview] Message-ID: <20200109085222.22670-6-jagan@amarulasolutions.com> (raw) In-Reply-To: <20200109085222.22670-1-jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org> Add bootcount support for Rockchip rk3399. The bootcount value is preserved in PMU_SYS_REG0 register, this would help to support redundent boot. Once the redundant boot triggers, the altboot command will look for extlinux-rollback.conf on particular bootable partition which supposed to be a recovery partition where redundant boot required. Reviewed-by: Kever Yang <kever.yang-TNX95d0MmH7DzftRWevZcw@public.gmane.org> Signed-off-by: Jagan Teki <jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org> --- arch/arm/mach-rockchip/Kconfig | 2 ++ arch/arm/mach-rockchip/rk3399/Kconfig | 10 ++++++++++ include/configs/rk3399_common.h | 5 ++++- 3 files changed, 16 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-rockchip/Kconfig b/arch/arm/mach-rockchip/Kconfig index d8d68ba447..9a3c65ec58 100644 --- a/arch/arm/mach-rockchip/Kconfig +++ b/arch/arm/mach-rockchip/Kconfig @@ -244,6 +244,8 @@ config ROCKCHIP_RK3399 imply TPL_CLK imply TPL_TINY_MEMSET imply TPL_ROCKCHIP_COMMON_BOARD + imply SYS_BOOTCOUNT_SINGLEWORD if BOOTCOUNT_LIMIT + imply CMD_BOOTCOUNT if BOOTCOUNT_LIMIT help The Rockchip RK3399 is a ARM-based SoC with a dual-core Cortex-A72 and quad-core Cortex-A53. diff --git a/arch/arm/mach-rockchip/rk3399/Kconfig b/arch/arm/mach-rockchip/rk3399/Kconfig index 868e85fc2a..f994152803 100644 --- a/arch/arm/mach-rockchip/rk3399/Kconfig +++ b/arch/arm/mach-rockchip/rk3399/Kconfig @@ -113,6 +113,16 @@ config TPL_TEXT_BASE config SPL_STACK_R_ADDR default 0x04000000 +if BOOTCOUNT_LIMIT + +config BOOTCOUNT_BOOTLIMIT + default 3 + +config SYS_BOOTCOUNT_ADDR + default 0xff3100f0 # PMU_SYS_REG0 + +endif # BOOTCOUNT_LIMIT + source "board/rockchip/evb_rk3399/Kconfig" source "board/theobroma-systems/puma_rk3399/Kconfig" source "board/vamrs/rock960_rk3399/Kconfig" diff --git a/include/configs/rk3399_common.h b/include/configs/rk3399_common.h index 127ca1f09c..89a8a44bbe 100644 --- a/include/configs/rk3399_common.h +++ b/include/configs/rk3399_common.h @@ -63,7 +63,10 @@ "fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" \ "partitions=" PARTS_DEFAULT \ ROCKCHIP_DEVICE_SETTINGS \ - BOOTENV + BOOTENV \ + "altbootcmd=" \ + "setenv boot_syslinux_conf extlinux/extlinux-rollback.conf;" \ + "run distro_bootcmd\0" #endif -- 2.18.0.321.gffc6fa0e3
WARNING: multiple messages have this Message-ID (diff)
From: Jagan Teki <jagan@amarulasolutions.com> To: u-boot@lists.denx.de Subject: [PATCH v4 5/8] rockchip: rk3399: Add bootcount support Date: Thu, 9 Jan 2020 14:22:19 +0530 [thread overview] Message-ID: <20200109085222.22670-6-jagan@amarulasolutions.com> (raw) In-Reply-To: <20200109085222.22670-1-jagan@amarulasolutions.com> Add bootcount support for Rockchip rk3399. The bootcount value is preserved in PMU_SYS_REG0 register, this would help to support redundent boot. Once the redundant boot triggers, the altboot command will look for extlinux-rollback.conf on particular bootable partition which supposed to be a recovery partition where redundant boot required. Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> --- arch/arm/mach-rockchip/Kconfig | 2 ++ arch/arm/mach-rockchip/rk3399/Kconfig | 10 ++++++++++ include/configs/rk3399_common.h | 5 ++++- 3 files changed, 16 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-rockchip/Kconfig b/arch/arm/mach-rockchip/Kconfig index d8d68ba447..9a3c65ec58 100644 --- a/arch/arm/mach-rockchip/Kconfig +++ b/arch/arm/mach-rockchip/Kconfig @@ -244,6 +244,8 @@ config ROCKCHIP_RK3399 imply TPL_CLK imply TPL_TINY_MEMSET imply TPL_ROCKCHIP_COMMON_BOARD + imply SYS_BOOTCOUNT_SINGLEWORD if BOOTCOUNT_LIMIT + imply CMD_BOOTCOUNT if BOOTCOUNT_LIMIT help The Rockchip RK3399 is a ARM-based SoC with a dual-core Cortex-A72 and quad-core Cortex-A53. diff --git a/arch/arm/mach-rockchip/rk3399/Kconfig b/arch/arm/mach-rockchip/rk3399/Kconfig index 868e85fc2a..f994152803 100644 --- a/arch/arm/mach-rockchip/rk3399/Kconfig +++ b/arch/arm/mach-rockchip/rk3399/Kconfig @@ -113,6 +113,16 @@ config TPL_TEXT_BASE config SPL_STACK_R_ADDR default 0x04000000 +if BOOTCOUNT_LIMIT + +config BOOTCOUNT_BOOTLIMIT + default 3 + +config SYS_BOOTCOUNT_ADDR + default 0xff3100f0 # PMU_SYS_REG0 + +endif # BOOTCOUNT_LIMIT + source "board/rockchip/evb_rk3399/Kconfig" source "board/theobroma-systems/puma_rk3399/Kconfig" source "board/vamrs/rock960_rk3399/Kconfig" diff --git a/include/configs/rk3399_common.h b/include/configs/rk3399_common.h index 127ca1f09c..89a8a44bbe 100644 --- a/include/configs/rk3399_common.h +++ b/include/configs/rk3399_common.h @@ -63,7 +63,10 @@ "fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" \ "partitions=" PARTS_DEFAULT \ ROCKCHIP_DEVICE_SETTINGS \ - BOOTENV + BOOTENV \ + "altbootcmd=" \ + "setenv boot_syslinux_conf extlinux/extlinux-rollback.conf;" \ + "run distro_bootcmd\0" #endif -- 2.18.0.321.gffc6fa0e3
next prev parent reply other threads:[~2020-01-09 8:52 UTC|newest] Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top 2020-01-09 8:52 [PATCH v4 0/8] rk3399: Add redundant boot support Jagan Teki 2020-01-09 8:52 ` Jagan Teki 2020-01-09 8:52 ` [PATCH v4 1/8] rockchip: Add cpu-info Jagan Teki 2020-01-09 8:52 ` Jagan Teki 2020-01-09 8:52 ` [PATCH v4 2/8] rockchip: rk3399: Enable DISPLAY_CPUINFO Jagan Teki 2020-01-09 8:52 ` Jagan Teki 2020-01-09 8:52 ` [PATCH v4 3/8] arm: rockchip: Add common cru.h Jagan Teki 2020-01-09 8:52 ` Jagan Teki 2020-01-09 8:52 ` [PATCH v4 4/8] rockchip: Add common reset cause Jagan Teki 2020-01-09 8:52 ` Jagan Teki [not found] ` <20200109085222.22670-1-jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org> 2020-01-09 8:52 ` Jagan Teki [this message] 2020-01-09 8:52 ` [PATCH v4 5/8] rockchip: rk3399: Add bootcount support Jagan Teki 2020-01-09 8:52 ` [PATCH v4 6/8] watchdog: kconfig: Enable designware for rk3399 Jagan Teki 2020-01-09 8:52 ` Jagan Teki [not found] ` <20200109085222.22670-7-jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org> 2020-01-17 6:46 ` Kever Yang 2020-01-17 6:46 ` Kever Yang 2020-01-09 8:52 ` [DO NOT MERGE] [PATCH v4 7/8] roc-rk3399-pc: Enable watchdog Jagan Teki 2020-01-09 8:52 ` Jagan Teki 2020-01-09 8:52 ` [DO NOT MERGE] [PATCH v4 8/8] roc-rk3399-pc: Enable bootcount Jagan Teki 2020-01-09 8:52 ` Jagan Teki
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20200109085222.22670-6-jagan@amarulasolutions.com \ --to=jagan-dyjbcgdgk7pe9whmmfpqlfatqe2ktcn/@public.gmane.org \ --cc=kever.yang-TNX95d0MmH7DzftRWevZcw@public.gmane.org \ --cc=linux-amarula-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org \ --cc=linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \ --cc=philipp.tomsich-SN7IsUiht6C/RdPyistoZJqQE7yCjDx5@public.gmane.org \ --cc=sjg-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org \ --cc=u-boot-0aAXYlwwYIKGBzrmiIFOJg@public.gmane.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.