All of lore.kernel.org
 help / color / mirror / Atom feed
From: Rocky Liao <rjliao@codeaurora.org>
To: marcel@holtmann.org, johan.hedberg@gmail.com
Cc: mka@chromium.org, linux-kernel@vger.kernel.org,
	linux-bluetooth@vger.kernel.org, linux-arm-msm@vger.kernel.org,
	Rocky Liao <rjliao@codeaurora.org>
Subject: [PATCH v4] Bluetooth: hci_qca: Add qca_power_on() API to support both wcn399x and Rome power up
Date: Fri, 10 Jan 2020 11:32:14 +0800	[thread overview]
Message-ID: <20200110033214.16327-1-rjliao@codeaurora.org> (raw)
In-Reply-To: <20200107052601.32216-1-rjliao@codeaurora.org>

This patch adds a unified API qca_power_on() to support both wcn399x and
Rome power on. For wcn399x it calls the qca_wcn3990_init() to init the
regulators, and for Rome it pulls up the bt_en GPIO to power up the btsoc.
It also moves all the power up operation from hdev->open() to
hdev->setup().

Signed-off-by: Rocky Liao <rjliao@codeaurora.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
---

Changes in v2: None
Changes in v3:
  -moved all the power up operation from open() to setup()
  -updated the commit message
Changes in v4:
  -made a single call to qca_power_on() in setup()


 drivers/bluetooth/hci_qca.c | 48 +++++++++++++++++++++++--------------
 1 file changed, 30 insertions(+), 18 deletions(-)

diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
index 82e4cd4b6663..6a67e5489b16 100644
--- a/drivers/bluetooth/hci_qca.c
+++ b/drivers/bluetooth/hci_qca.c
@@ -541,7 +541,6 @@ static int qca_open(struct hci_uart *hu)
 {
 	struct qca_serdev *qcadev;
 	struct qca_data *qca;
-	int ret;
 
 	BT_DBG("hu %p qca_open", hu);
 
@@ -582,23 +581,10 @@ static int qca_open(struct hci_uart *hu)
 	hu->priv = qca;
 
 	if (hu->serdev) {
-
 		qcadev = serdev_device_get_drvdata(hu->serdev);
-		if (!qca_is_wcn399x(qcadev->btsoc_type)) {
-			gpiod_set_value_cansleep(qcadev->bt_en, 1);
-			/* Controller needs time to bootup. */
-			msleep(150);
-		} else {
+		if (qca_is_wcn399x(qcadev->btsoc_type)) {
 			hu->init_speed = qcadev->init_speed;
 			hu->oper_speed = qcadev->oper_speed;
-			ret = qca_regulator_enable(qcadev);
-			if (ret) {
-				destroy_workqueue(qca->workqueue);
-				kfree_skb(qca->rx_skb);
-				hu->priv = NULL;
-				kfree(qca);
-				return ret;
-			}
 		}
 	}
 
@@ -1531,6 +1517,31 @@ static int qca_wcn3990_init(struct hci_uart *hu)
 	return 0;
 }
 
+static int qca_power_on(struct hci_dev *hdev)
+{
+	struct hci_uart *hu = hci_get_drvdata(hdev);
+	enum qca_btsoc_type soc_type = qca_soc_type(hu);
+	struct qca_serdev *qcadev;
+	int ret = 0;
+
+	/* Non-serdev device usually is powered by external power
+	 * and don't need additional action in driver for power on
+	 */
+	if (!hu->serdev)
+		return 0;
+
+	if (qca_is_wcn399x(soc_type)) {
+		ret = qca_wcn3990_init(hu);
+	} else {
+		qcadev = serdev_device_get_drvdata(hu->serdev);
+		gpiod_set_value_cansleep(qcadev->bt_en, 1);
+		/* Controller needs time to bootup. */
+		msleep(150);
+	}
+
+	return ret;
+}
+
 static int qca_setup(struct hci_uart *hu)
 {
 	struct hci_dev *hdev = hu->hdev;
@@ -1553,6 +1564,10 @@ static int qca_setup(struct hci_uart *hu)
 	 */
 	set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &hdev->quirks);
 
+	ret = qca_power_on(hdev);
+	if (ret)
+		return ret;
+
 	if (qca_is_wcn399x(soc_type)) {
 		bt_dev_info(hdev, "setting up wcn3990");
 
@@ -1562,9 +1577,6 @@ static int qca_setup(struct hci_uart *hu)
 		set_bit(HCI_QUIRK_NON_PERSISTENT_SETUP, &hdev->quirks);
 		set_bit(HCI_QUIRK_USE_BDADDR_PROPERTY, &hdev->quirks);
 		hu->hdev->shutdown = qca_power_off;
-		ret = qca_wcn3990_init(hu);
-		if (ret)
-			return ret;
 
 		ret = qca_read_soc_version(hdev, &soc_ver, soc_type);
 		if (ret)
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project

  parent reply	other threads:[~2020-01-10  3:32 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-01-07  5:26 [PATCH v1] Bluetooth: hci_qca: Add qca_power_on() API to support both wcn399x and Rome power up Rocky Liao
2020-01-07 17:31 ` Matthias Kaehlcke
2020-01-08  3:02   ` Rocky Liao
2020-01-08  9:08 ` [PATCH v2 1/3] " Rocky Liao
2020-01-08  9:08   ` [PATCH v2 2/3] Bluetooth: hci_qca: Move the power on from open() to setup() for QCA Rome Rocky Liao
2020-01-08  9:08   ` [PATCH v2 3/3] Bluetooth: hci_qca: Use unified API qca_power_on() to power up wcn399x Rocky Liao
2020-01-08 18:34   ` [PATCH v2 1/3] Bluetooth: hci_qca: Add qca_power_on() API to support both wcn399x and Rome power up Matthias Kaehlcke
2020-01-09  3:22     ` Rocky Liao
2020-01-09  3:37       ` Rocky Liao
2020-01-09  5:14 ` [PATCH v3] " Rocky Liao
2020-01-09 19:05   ` Matthias Kaehlcke
2020-01-10  3:07     ` Rocky Liao
2020-01-10  3:32 ` Rocky Liao [this message]
2020-01-11  0:31   ` [PATCH v4] " Matthias Kaehlcke
2020-01-13  3:53     ` Rocky Liao
2020-01-13  4:29 ` Rocky Liao
2020-01-13  4:31   ` Rocky Liao
2020-01-13  4:31   ` Rocky Liao
2020-01-13  4:30 ` [PATCH v5] " Rocky Liao
2020-01-14 13:55   ` Marcel Holtmann

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200110033214.16327-1-rjliao@codeaurora.org \
    --to=rjliao@codeaurora.org \
    --cc=johan.hedberg@gmail.com \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-bluetooth@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=marcel@holtmann.org \
    --cc=mka@chromium.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.