All of lore.kernel.org
 help / color / mirror / Atom feed
From: Peter Ujfalusi <peter.ujfalusi@ti.com>
To: <mchehab@kernel.org>, <hyun.kwon@xilinx.com>,
	<laurent.pinchart@ideasonboard.com>
Cc: <vkoul@kernel.org>, <linux-media@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>, <michal.simek@xilinx.com>,
	<linux-arm-kernel@lists.infradead.org>
Subject: [PATCH v2] media: xilinx: Use dma_request_chan() instead dma_request_slave_channel()
Date: Fri, 10 Jan 2020 09:16:48 +0200	[thread overview]
Message-ID: <20200110071648.15690-1-peter.ujfalusi@ti.com> (raw)

dma_request_slave_channel() is a wrapper on top of dma_request_chan()
eating up the error code.

By using dma_request_chan() directly the driver can support deferred
probing against DMA.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
---
Hi,

Changes since v1:
- Fix cleanup path when DMA request failed as suggested by Laurent
- Print error only in case when the error is not EPROBE_DEFER

Regards,
Peter

 drivers/media/platform/xilinx/xilinx-dma.c | 11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

diff --git a/drivers/media/platform/xilinx/xilinx-dma.c b/drivers/media/platform/xilinx/xilinx-dma.c
index b211380a11f2..3bb54a4db6a4 100644
--- a/drivers/media/platform/xilinx/xilinx-dma.c
+++ b/drivers/media/platform/xilinx/xilinx-dma.c
@@ -725,10 +725,11 @@ int xvip_dma_init(struct xvip_composite_device *xdev, struct xvip_dma *dma,
 
 	/* ... and the DMA channel. */
 	snprintf(name, sizeof(name), "port%u", port);
-	dma->dma = dma_request_slave_channel(dma->xdev->dev, name);
-	if (dma->dma == NULL) {
-		dev_err(dma->xdev->dev, "no VDMA channel found\n");
-		ret = -ENODEV;
+	dma->dma = dma_request_chan(dma->xdev->dev, name);
+	if (IS_ERR(dma->dma)) {
+		ret = PTR_ERR(dma->dma);
+		if (ret != -EPROBE_DEFER)
+			dev_err(dma->xdev->dev, "no VDMA channel found\n");
 		goto error;
 	}
 
@@ -752,7 +753,7 @@ void xvip_dma_cleanup(struct xvip_dma *dma)
 	if (video_is_registered(&dma->video))
 		video_unregister_device(&dma->video);
 
-	if (dma->dma)
+	if (!IS_ERR_OR_NULL(dma->dma))
 		dma_release_channel(dma->dma);
 
 	media_entity_cleanup(&dma->video.entity);
-- 
Peter

Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki


WARNING: multiple messages have this Message-ID (diff)
From: Peter Ujfalusi <peter.ujfalusi@ti.com>
To: <mchehab@kernel.org>, <hyun.kwon@xilinx.com>,
	<laurent.pinchart@ideasonboard.com>
Cc: vkoul@kernel.org, michal.simek@xilinx.com,
	linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-media@vger.kernel.org
Subject: [PATCH v2] media: xilinx: Use dma_request_chan() instead dma_request_slave_channel()
Date: Fri, 10 Jan 2020 09:16:48 +0200	[thread overview]
Message-ID: <20200110071648.15690-1-peter.ujfalusi@ti.com> (raw)

dma_request_slave_channel() is a wrapper on top of dma_request_chan()
eating up the error code.

By using dma_request_chan() directly the driver can support deferred
probing against DMA.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
---
Hi,

Changes since v1:
- Fix cleanup path when DMA request failed as suggested by Laurent
- Print error only in case when the error is not EPROBE_DEFER

Regards,
Peter

 drivers/media/platform/xilinx/xilinx-dma.c | 11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

diff --git a/drivers/media/platform/xilinx/xilinx-dma.c b/drivers/media/platform/xilinx/xilinx-dma.c
index b211380a11f2..3bb54a4db6a4 100644
--- a/drivers/media/platform/xilinx/xilinx-dma.c
+++ b/drivers/media/platform/xilinx/xilinx-dma.c
@@ -725,10 +725,11 @@ int xvip_dma_init(struct xvip_composite_device *xdev, struct xvip_dma *dma,
 
 	/* ... and the DMA channel. */
 	snprintf(name, sizeof(name), "port%u", port);
-	dma->dma = dma_request_slave_channel(dma->xdev->dev, name);
-	if (dma->dma == NULL) {
-		dev_err(dma->xdev->dev, "no VDMA channel found\n");
-		ret = -ENODEV;
+	dma->dma = dma_request_chan(dma->xdev->dev, name);
+	if (IS_ERR(dma->dma)) {
+		ret = PTR_ERR(dma->dma);
+		if (ret != -EPROBE_DEFER)
+			dev_err(dma->xdev->dev, "no VDMA channel found\n");
 		goto error;
 	}
 
@@ -752,7 +753,7 @@ void xvip_dma_cleanup(struct xvip_dma *dma)
 	if (video_is_registered(&dma->video))
 		video_unregister_device(&dma->video);
 
-	if (dma->dma)
+	if (!IS_ERR_OR_NULL(dma->dma))
 		dma_release_channel(dma->dma);
 
 	media_entity_cleanup(&dma->video.entity);
-- 
Peter

Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

             reply	other threads:[~2020-01-10  7:16 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-01-10  7:16 Peter Ujfalusi [this message]
2020-01-10  7:16 ` [PATCH v2] media: xilinx: Use dma_request_chan() instead dma_request_slave_channel() Peter Ujfalusi
2020-01-15 17:28 ` Laurent Pinchart
2020-01-15 17:28   ` Laurent Pinchart
2020-01-16 11:36   ` Hans Verkuil
2020-01-16 11:36     ` Hans Verkuil

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200110071648.15690-1-peter.ujfalusi@ti.com \
    --to=peter.ujfalusi@ti.com \
    --cc=hyun.kwon@xilinx.com \
    --cc=laurent.pinchart@ideasonboard.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=mchehab@kernel.org \
    --cc=michal.simek@xilinx.com \
    --cc=vkoul@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.