All of lore.kernel.org
 help / color / mirror / Atom feed
From: Alexander Tsoy <alexander@tsoy.me>
To: alsa-devel@alsa-project.org
Cc: Takashi Iwai <tiwai@suse.de>
Subject: [alsa-devel] [PATCH v2] ALSA: usb-audio: Add boot quirk for MOTU M Series
Date: Sun, 12 Jan 2020 13:05:36 +0300	[thread overview]
Message-ID: <20200112100536.17326-1-alexander@tsoy.me> (raw)

Add delay to make sure that audio urbs are not sent too early.
Otherwise the device hangs. Windows driver makes ~2s delay, so use
about the same time delay value.

snd_usb_apply_boot_quirk() is called 3 times for my MOTU M4, which
is an overkill. Thus a quirk that is called only once is implemented.

Also send two vendor-specific control messages before and after
the delay. This behaviour is blindly copied from the Windows driver.

Signed-off-by: Alexander Tsoy <alexander@tsoy.me>
---
v2 changes: indentation fixes

 sound/usb/card.c   |  4 ++++
 sound/usb/quirks.c | 38 ++++++++++++++++++++++++++++++++++++++
 sound/usb/quirks.h |  5 +++++
 3 files changed, 47 insertions(+)

diff --git a/sound/usb/card.c b/sound/usb/card.c
index 9f743ebae615..2f582ac7cf78 100644
--- a/sound/usb/card.c
+++ b/sound/usb/card.c
@@ -600,6 +600,10 @@ static int usb_audio_probe(struct usb_interface *intf,
 		}
 	}
 	if (! chip) {
+		err = snd_usb_apply_boot_quirk_once(dev, intf, quirk, id);
+		if (err < 0)
+			return err;
+
 		/* it's a fresh one.
 		 * now look for an empty slot and create a new card instance
 		 */
diff --git a/sound/usb/quirks.c b/sound/usb/quirks.c
index 82184036437b..0464df785f2e 100644
--- a/sound/usb/quirks.c
+++ b/sound/usb/quirks.c
@@ -1113,6 +1113,31 @@ static int snd_usb_motu_microbookii_boot_quirk(struct usb_device *dev)
 	return err;
 }
 
+static int snd_usb_motu_m_series_boot_quirk(struct usb_device *dev)
+{
+	int ret;
+
+	if (snd_usb_pipe_sanity_check(dev, usb_sndctrlpipe(dev, 0)))
+		return -EINVAL;
+	ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
+			      1, USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+			      0x0, 0, NULL, 0, 1000);
+
+	if (ret < 0)
+		return ret;
+
+	msleep(2000);
+
+	ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
+			      1, USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+			      0x20, 0, NULL, 0, 1000);
+
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
 /*
  * Setup quirks
  */
@@ -1297,6 +1322,19 @@ int snd_usb_apply_boot_quirk(struct usb_device *dev,
 	return 0;
 }
 
+int snd_usb_apply_boot_quirk_once(struct usb_device *dev,
+				  struct usb_interface *intf,
+				  const struct snd_usb_audio_quirk *quirk,
+				  unsigned int id)
+{
+	switch (id) {
+	case USB_ID(0x07fd, 0x0008): /* MOTU M Series */
+		return snd_usb_motu_m_series_boot_quirk(dev);
+	}
+
+	return 0;
+}
+
 /*
  * check if the device uses big-endian samples
  */
diff --git a/sound/usb/quirks.h b/sound/usb/quirks.h
index a80e0ddd0736..b46b108769e8 100644
--- a/sound/usb/quirks.h
+++ b/sound/usb/quirks.h
@@ -20,6 +20,11 @@ int snd_usb_apply_boot_quirk(struct usb_device *dev,
 			     const struct snd_usb_audio_quirk *quirk,
 			     unsigned int usb_id);
 
+int snd_usb_apply_boot_quirk_once(struct usb_device *dev,
+			     struct usb_interface *intf,
+			     const struct snd_usb_audio_quirk *quirk,
+			     unsigned int usb_id);
+
 void snd_usb_set_format_quirk(struct snd_usb_substream *subs,
 			      struct audioformat *fmt);
 
-- 
2.24.1

_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel

                 reply	other threads:[~2020-01-12 10:06 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200112100536.17326-1-alexander@tsoy.me \
    --to=alexander@tsoy.me \
    --cc=alsa-devel@alsa-project.org \
    --cc=tiwai@suse.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.