From: Paul Cercueil <paul@crapouillou.net> To: Sam Ravnborg <sam@ravnborg.org>, Thierry Reding <thierry.reding@gmail.com>, Rob Herring <robh+dt@kernel.org>, Mark Rutland <mark.rutland@arm.com> Cc: od@zcrc.me, dri-devel@lists.freedesktop.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, Paul Cercueil <paul@crapouillou.net> Subject: [PATCH v3 3/3] drm/panel: simple: Add support for the Frida FRD350H54004 panel Date: Mon, 13 Jan 2020 13:17:41 -0300 [thread overview] Message-ID: <20200113161741.32061-3-paul@crapouillou.net> (raw) In-Reply-To: <20200113161741.32061-1-paul@crapouillou.net> The FRD350H54004 is a simple 3.5" 320x240 24-bit TFT panel, found for instance inside the Anbernic RG-350 handheld gaming console. v2: Order alphabetically v3: Add connector_type, and update timings according to the constraints listed in the datasheet Signed-off-by: Paul Cercueil <paul@crapouillou.net> --- drivers/gpu/drm/panel/panel-simple.c | 30 ++++++++++++++++++++++++++++ 1 file changed, 30 insertions(+) diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c index e14c14ac62b5..d6f77bc494c7 100644 --- a/drivers/gpu/drm/panel/panel-simple.c +++ b/drivers/gpu/drm/panel/panel-simple.c @@ -1440,6 +1440,33 @@ static const struct panel_desc foxlink_fl500wvr00_a0t = { .bus_format = MEDIA_BUS_FMT_RGB888_1X24, }; +static const struct drm_display_mode frida_frd350h54004_mode = { + .clock = 6000, + .hdisplay = 320, + .hsync_start = 320 + 44, + .hsync_end = 320 + 44 + 16, + .htotal = 320 + 44 + 16 + 20, + .vdisplay = 240, + .vsync_start = 240 + 2, + .vsync_end = 240 + 2 + 6, + .vtotal = 240 + 2 + 6 + 2, + .vrefresh = 60, + .flags = DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC, +}; + +static const struct panel_desc frida_frd350h54004 = { + .modes = &frida_frd350h54004_mode, + .num_modes = 1, + .bpc = 8, + .size = { + .width = 77, + .height = 64, + }, + .bus_format = MEDIA_BUS_FMT_RGB888_1X24, + .bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_POSEDGE, + .connector_type = DRM_MODE_CONNECTOR_DPI, +}; + static const struct drm_display_mode friendlyarm_hd702e_mode = { .clock = 67185, .hdisplay = 800, @@ -3309,6 +3336,9 @@ static const struct of_device_id platform_of_match[] = { }, { .compatible = "foxlink,fl500wvr00-a0t", .data = &foxlink_fl500wvr00_a0t, + }, { + .compatible = "frida,frd350h54004", + .data = &frida_frd350h54004, }, { .compatible = "friendlyarm,hd702e", .data = &friendlyarm_hd702e, -- 2.24.1
WARNING: multiple messages have this Message-ID (diff)
From: Paul Cercueil <paul@crapouillou.net> To: Sam Ravnborg <sam@ravnborg.org>, Thierry Reding <thierry.reding@gmail.com>, Rob Herring <robh+dt@kernel.org>, Mark Rutland <mark.rutland@arm.com> Cc: Paul Cercueil <paul@crapouillou.net>, devicetree@vger.kernel.org, od@zcrc.me, linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org Subject: [PATCH v3 3/3] drm/panel: simple: Add support for the Frida FRD350H54004 panel Date: Mon, 13 Jan 2020 13:17:41 -0300 [thread overview] Message-ID: <20200113161741.32061-3-paul@crapouillou.net> (raw) In-Reply-To: <20200113161741.32061-1-paul@crapouillou.net> The FRD350H54004 is a simple 3.5" 320x240 24-bit TFT panel, found for instance inside the Anbernic RG-350 handheld gaming console. v2: Order alphabetically v3: Add connector_type, and update timings according to the constraints listed in the datasheet Signed-off-by: Paul Cercueil <paul@crapouillou.net> --- drivers/gpu/drm/panel/panel-simple.c | 30 ++++++++++++++++++++++++++++ 1 file changed, 30 insertions(+) diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c index e14c14ac62b5..d6f77bc494c7 100644 --- a/drivers/gpu/drm/panel/panel-simple.c +++ b/drivers/gpu/drm/panel/panel-simple.c @@ -1440,6 +1440,33 @@ static const struct panel_desc foxlink_fl500wvr00_a0t = { .bus_format = MEDIA_BUS_FMT_RGB888_1X24, }; +static const struct drm_display_mode frida_frd350h54004_mode = { + .clock = 6000, + .hdisplay = 320, + .hsync_start = 320 + 44, + .hsync_end = 320 + 44 + 16, + .htotal = 320 + 44 + 16 + 20, + .vdisplay = 240, + .vsync_start = 240 + 2, + .vsync_end = 240 + 2 + 6, + .vtotal = 240 + 2 + 6 + 2, + .vrefresh = 60, + .flags = DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC, +}; + +static const struct panel_desc frida_frd350h54004 = { + .modes = &frida_frd350h54004_mode, + .num_modes = 1, + .bpc = 8, + .size = { + .width = 77, + .height = 64, + }, + .bus_format = MEDIA_BUS_FMT_RGB888_1X24, + .bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_POSEDGE, + .connector_type = DRM_MODE_CONNECTOR_DPI, +}; + static const struct drm_display_mode friendlyarm_hd702e_mode = { .clock = 67185, .hdisplay = 800, @@ -3309,6 +3336,9 @@ static const struct of_device_id platform_of_match[] = { }, { .compatible = "foxlink,fl500wvr00-a0t", .data = &foxlink_fl500wvr00_a0t, + }, { + .compatible = "frida,frd350h54004", + .data = &frida_frd350h54004, }, { .compatible = "friendlyarm,hd702e", .data = &friendlyarm_hd702e, -- 2.24.1 _______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel
next prev parent reply other threads:[~2020-01-13 16:18 UTC|newest] Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top 2020-01-13 16:17 [PATCH v3 1/3] dt-bindings: vendor-prefixes: Add Shenzhen Frida LCD Co., Ltd Paul Cercueil 2020-01-13 16:17 ` Paul Cercueil 2020-01-13 16:17 ` [PATCH v3 2/3] dt-bindings: panel-simple: Add compatible for Frida FRD350H54004 LCD Paul Cercueil 2020-01-13 16:17 ` Paul Cercueil 2020-01-13 17:32 ` Sam Ravnborg 2020-01-13 17:32 ` Sam Ravnborg 2020-01-13 16:17 ` Paul Cercueil [this message] 2020-01-13 16:17 ` [PATCH v3 3/3] drm/panel: simple: Add support for the Frida FRD350H54004 panel Paul Cercueil 2020-01-13 17:33 ` Sam Ravnborg 2020-01-13 17:33 ` Sam Ravnborg 2020-01-13 17:32 ` [PATCH v3 1/3] dt-bindings: vendor-prefixes: Add Shenzhen Frida LCD Co., Ltd Sam Ravnborg 2020-01-13 17:32 ` Sam Ravnborg
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20200113161741.32061-3-paul@crapouillou.net \ --to=paul@crapouillou.net \ --cc=devicetree@vger.kernel.org \ --cc=dri-devel@lists.freedesktop.org \ --cc=linux-kernel@vger.kernel.org \ --cc=mark.rutland@arm.com \ --cc=od@zcrc.me \ --cc=robh+dt@kernel.org \ --cc=sam@ravnborg.org \ --cc=thierry.reding@gmail.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.