All of lore.kernel.org
 help / color / mirror / Atom feed
From: Faiz Abbas <faiz_abbas@ti.com>
To: <linux-omap@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	<devicetree@vger.kernel.org>, <linux-mmc@vger.kernel.org>
Cc: <adrian.hunter@intel.com>, <kishon@ti.com>,
	<mark.rutland@arm.com>, <robh+dt@kernel.org>,
	<ulf.hansson@linaro.org>, <faiz_abbas@ti.com>, <tony@atomide.com>
Subject: [PATCH v5 10/10] mmc: sdhci-omap: Add special reset capability
Date: Thu, 16 Jan 2020 16:21:54 +0530	[thread overview]
Message-ID: <20200116105154.7685-11-faiz_abbas@ti.com> (raw)
In-Reply-To: <20200116105154.7685-1-faiz_abbas@ti.com>

Some omap controllers need software to monitor a 0->1->0 for software
reset. Add a SDHCI_OMAP_SPECIAL_RESET flag to indicate this.

Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
---
 drivers/mmc/host/sdhci-omap.c | 23 +++++++++++++++++++++++
 1 file changed, 23 insertions(+)

diff --git a/drivers/mmc/host/sdhci-omap.c b/drivers/mmc/host/sdhci-omap.c
index 5433c9e6ac10..882053151a47 100644
--- a/drivers/mmc/host/sdhci-omap.c
+++ b/drivers/mmc/host/sdhci-omap.c
@@ -86,6 +86,7 @@
 
 /* sdhci-omap controller flags */
 #define SDHCI_OMAP_REQUIRE_IODELAY	BIT(0)
+#define SDHCI_OMAP_SPECIAL_RESET	BIT(1)
 
 struct sdhci_omap_data {
 	u32 offset;
@@ -779,15 +780,35 @@ static void sdhci_omap_set_uhs_signaling(struct sdhci_host *host,
 	sdhci_omap_start_clock(omap_host);
 }
 
+#define MMC_TIMEOUT_US		20000		/* 20000 micro Sec */
 static void sdhci_omap_reset(struct sdhci_host *host, u8 mask)
 {
 	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
 	struct sdhci_omap_host *omap_host = sdhci_pltfm_priv(pltfm_host);
+	unsigned long limit = MMC_TIMEOUT_US;
+	unsigned long i = 0;
 
 	/* Don't reset data lines during tuning operation */
 	if (omap_host->is_tuning)
 		mask &= ~SDHCI_RESET_DATA;
 
+	if (omap_host->flags & SDHCI_OMAP_SPECIAL_RESET) {
+		sdhci_writeb(host, mask, SDHCI_SOFTWARE_RESET);
+		while ((!(sdhci_readb(host, SDHCI_SOFTWARE_RESET) & mask)) &&
+		       (i++ < limit))
+			udelay(1);
+		i = 0;
+		while ((sdhci_readb(host, SDHCI_SOFTWARE_RESET) & mask) &&
+		       (i++ < limit))
+			udelay(1);
+
+		if (sdhci_readb(host, SDHCI_SOFTWARE_RESET) & mask)
+			dev_err(mmc_dev(host->mmc),
+				"Timeout waiting on controller reset in %s\n",
+				__func__);
+		return;
+	}
+
 	sdhci_reset(host, mask);
 }
 
@@ -900,10 +921,12 @@ static const struct sdhci_omap_data k2g_data = {
 
 static const struct sdhci_omap_data am335_data = {
 	.offset = 0x200,
+	.flags = SDHCI_OMAP_SPECIAL_RESET,
 };
 
 static const struct sdhci_omap_data am437_data = {
 	.offset = 0x200,
+	.flags = SDHCI_OMAP_SPECIAL_RESET,
 };
 
 static const struct sdhci_omap_data dra7_data = {
-- 
2.19.2


WARNING: multiple messages have this Message-ID (diff)
From: Faiz Abbas <faiz_abbas-l0cyMroinI0@public.gmane.org>
To: linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-mmc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: adrian.hunter-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org,
	kishon-l0cyMroinI0@public.gmane.org,
	mark.rutland-5wv7dgnIgG8@public.gmane.org,
	robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
	ulf.hansson-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org,
	faiz_abbas-l0cyMroinI0@public.gmane.org,
	tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org
Subject: [PATCH v5 10/10] mmc: sdhci-omap: Add special reset capability
Date: Thu, 16 Jan 2020 16:21:54 +0530	[thread overview]
Message-ID: <20200116105154.7685-11-faiz_abbas@ti.com> (raw)
In-Reply-To: <20200116105154.7685-1-faiz_abbas-l0cyMroinI0@public.gmane.org>

Some omap controllers need software to monitor a 0->1->0 for software
reset. Add a SDHCI_OMAP_SPECIAL_RESET flag to indicate this.

Signed-off-by: Faiz Abbas <faiz_abbas-l0cyMroinI0@public.gmane.org>
Acked-by: Adrian Hunter <adrian.hunter-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
---
 drivers/mmc/host/sdhci-omap.c | 23 +++++++++++++++++++++++
 1 file changed, 23 insertions(+)

diff --git a/drivers/mmc/host/sdhci-omap.c b/drivers/mmc/host/sdhci-omap.c
index 5433c9e6ac10..882053151a47 100644
--- a/drivers/mmc/host/sdhci-omap.c
+++ b/drivers/mmc/host/sdhci-omap.c
@@ -86,6 +86,7 @@
 
 /* sdhci-omap controller flags */
 #define SDHCI_OMAP_REQUIRE_IODELAY	BIT(0)
+#define SDHCI_OMAP_SPECIAL_RESET	BIT(1)
 
 struct sdhci_omap_data {
 	u32 offset;
@@ -779,15 +780,35 @@ static void sdhci_omap_set_uhs_signaling(struct sdhci_host *host,
 	sdhci_omap_start_clock(omap_host);
 }
 
+#define MMC_TIMEOUT_US		20000		/* 20000 micro Sec */
 static void sdhci_omap_reset(struct sdhci_host *host, u8 mask)
 {
 	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
 	struct sdhci_omap_host *omap_host = sdhci_pltfm_priv(pltfm_host);
+	unsigned long limit = MMC_TIMEOUT_US;
+	unsigned long i = 0;
 
 	/* Don't reset data lines during tuning operation */
 	if (omap_host->is_tuning)
 		mask &= ~SDHCI_RESET_DATA;
 
+	if (omap_host->flags & SDHCI_OMAP_SPECIAL_RESET) {
+		sdhci_writeb(host, mask, SDHCI_SOFTWARE_RESET);
+		while ((!(sdhci_readb(host, SDHCI_SOFTWARE_RESET) & mask)) &&
+		       (i++ < limit))
+			udelay(1);
+		i = 0;
+		while ((sdhci_readb(host, SDHCI_SOFTWARE_RESET) & mask) &&
+		       (i++ < limit))
+			udelay(1);
+
+		if (sdhci_readb(host, SDHCI_SOFTWARE_RESET) & mask)
+			dev_err(mmc_dev(host->mmc),
+				"Timeout waiting on controller reset in %s\n",
+				__func__);
+		return;
+	}
+
 	sdhci_reset(host, mask);
 }
 
@@ -900,10 +921,12 @@ static const struct sdhci_omap_data k2g_data = {
 
 static const struct sdhci_omap_data am335_data = {
 	.offset = 0x200,
+	.flags = SDHCI_OMAP_SPECIAL_RESET,
 };
 
 static const struct sdhci_omap_data am437_data = {
 	.offset = 0x200,
+	.flags = SDHCI_OMAP_SPECIAL_RESET,
 };
 
 static const struct sdhci_omap_data dra7_data = {
-- 
2.19.2

  parent reply	other threads:[~2020-01-16 10:51 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-01-16 10:51 [PATCH v5 00/10] Port am335x and am437x devices to sdhci-omap Faiz Abbas
2020-01-16 10:51 ` Faiz Abbas
2020-01-16 10:51 ` [PATCH v5 01/10] dt-bindings: sdhci-omap: Add properties for using external dma Faiz Abbas
2020-01-16 10:51   ` Faiz Abbas
2020-01-16 10:51 ` [PATCH v5 02/10] mmc: sdhci: Factor out some operations set to their own functions Faiz Abbas
2020-01-16 10:51   ` Faiz Abbas
2020-01-16 10:51 ` [PATCH v5 03/10] mmc: sdhci: add support for using external DMA devices Faiz Abbas
2020-01-16 10:51   ` Faiz Abbas
2020-01-16 10:51 ` [PATCH v5 04/10] mmc: sdhci-omap: Add using external dma Faiz Abbas
2020-01-16 10:51   ` Faiz Abbas
2020-01-16 10:51 ` [PATCH v5 05/10] mmc: sdhci: Convert sdhci_set_timeout_irq() to non-static Faiz Abbas
2020-01-16 10:51   ` Faiz Abbas
2020-01-16 10:51 ` [PATCH v5 06/10] mmc: sdhci: Refactor sdhci_set_timeout() Faiz Abbas
2020-01-16 10:51   ` Faiz Abbas
2020-01-16 10:51 ` [PATCH v5 07/10] mmc: sdhci-omap: Disable data timeout interrupt during erase Faiz Abbas
2020-01-16 10:51   ` Faiz Abbas
2020-01-16 10:51 ` [PATCH v5 08/10] dt-bindings: sdhci-omap: Add am335x and am437x specific bindings Faiz Abbas
2020-01-16 10:51   ` Faiz Abbas
2020-01-16 10:51 ` [PATCH v5 09/10] mmc: sdhci-omap: Add am335x and am437x specific compatibles Faiz Abbas
2020-01-16 10:51   ` Faiz Abbas
2020-01-16 10:51 ` Faiz Abbas [this message]
2020-01-16 10:51   ` [PATCH v5 10/10] mmc: sdhci-omap: Add special reset capability Faiz Abbas
2020-01-16 15:37 ` [PATCH v5 00/10] Port am335x and am437x devices to sdhci-omap Ulf Hansson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200116105154.7685-11-faiz_abbas@ti.com \
    --to=faiz_abbas@ti.com \
    --cc=adrian.hunter@intel.com \
    --cc=devicetree@vger.kernel.org \
    --cc=kishon@ti.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mmc@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=robh+dt@kernel.org \
    --cc=tony@atomide.com \
    --cc=ulf.hansson@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.