From: Samuel Holland <samuel@sholland.org> To: Maxime Ripard <mripard@kernel.org>, Chen-Yu Tsai <wens@csie.org> Cc: Rob Herring <robh+dt@kernel.org>, Mark Rutland <mark.rutland@arm.com>, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, linux-sunxi@googlegroups.com, Samuel Holland <samuel@sholland.org> Subject: [PATCH 9/9] arm64: dts: allwinner: pinebook: Fix 5v0 boost regulator Date: Sun, 19 Jan 2020 10:31:04 -0600 [thread overview] Message-ID: <20200119163104.13274-9-samuel@sholland.org> (raw) In-Reply-To: <20200119163104.13274-1-samuel@sholland.org> Now that AXP803 GPIO support is available, we can properly model the hardware. Replace the use of GPIO0-LDO with a fixed regulator controlled by GPIO0. This boost regulator is used to power the (internal and external) USB ports, as well as the speakers. Signed-off-by: Samuel Holland <samuel@sholland.org> --- .../dts/allwinner/sun50i-a64-pinebook.dts | 27 +++++++++---------- 1 file changed, 12 insertions(+), 15 deletions(-) diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts index 96434fdeb5c0..12e513ba8f50 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts @@ -57,6 +57,15 @@ enable-active-high; }; + reg_vcc5v0: vcc5v0 { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&axp_gpio 0 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + wifi_pwrseq: wifi_pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */ @@ -64,12 +73,7 @@ speaker_amp: audio-amplifier { compatible = "simple-audio-amplifier"; - /* - * TODO This is actually a fixed regulator controlled by - * the GPIO line on the PMIC. This should be corrected - * once GPIO support is added for this PMIC. - */ - VCC-supply = <®_ldo_io0>; + VCC-supply = <®_vcc5v0>; enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */ sound-name-prefix = "Speaker Amp"; }; @@ -302,13 +306,6 @@ regulator-name = "vdd-cpus"; }; -®_ldo_io0 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vcc-usb"; - status = "okay"; -}; - ®_rtc_ldo { regulator-name = "vcc-rtc"; }; @@ -357,7 +354,7 @@ }; &usbphy { - usb0_vbus-supply = <®_ldo_io0>; - usb1_vbus-supply = <®_ldo_io0>; + usb0_vbus-supply = <®_vcc5v0>; + usb1_vbus-supply = <®_vcc5v0>; status = "okay"; }; -- 2.23.0
WARNING: multiple messages have this Message-ID (diff)
From: Samuel Holland <samuel@sholland.org> To: Maxime Ripard <mripard@kernel.org>, Chen-Yu Tsai <wens@csie.org> Cc: Mark Rutland <mark.rutland@arm.com>, Samuel Holland <samuel@sholland.org>, linux-kernel@vger.kernel.org, linux-sunxi@googlegroups.com, Rob Herring <robh+dt@kernel.org>, linux-arm-kernel@lists.infradead.org Subject: [PATCH 9/9] arm64: dts: allwinner: pinebook: Fix 5v0 boost regulator Date: Sun, 19 Jan 2020 10:31:04 -0600 [thread overview] Message-ID: <20200119163104.13274-9-samuel@sholland.org> (raw) In-Reply-To: <20200119163104.13274-1-samuel@sholland.org> Now that AXP803 GPIO support is available, we can properly model the hardware. Replace the use of GPIO0-LDO with a fixed regulator controlled by GPIO0. This boost regulator is used to power the (internal and external) USB ports, as well as the speakers. Signed-off-by: Samuel Holland <samuel@sholland.org> --- .../dts/allwinner/sun50i-a64-pinebook.dts | 27 +++++++++---------- 1 file changed, 12 insertions(+), 15 deletions(-) diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts index 96434fdeb5c0..12e513ba8f50 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts @@ -57,6 +57,15 @@ enable-active-high; }; + reg_vcc5v0: vcc5v0 { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&axp_gpio 0 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + wifi_pwrseq: wifi_pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */ @@ -64,12 +73,7 @@ speaker_amp: audio-amplifier { compatible = "simple-audio-amplifier"; - /* - * TODO This is actually a fixed regulator controlled by - * the GPIO line on the PMIC. This should be corrected - * once GPIO support is added for this PMIC. - */ - VCC-supply = <®_ldo_io0>; + VCC-supply = <®_vcc5v0>; enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */ sound-name-prefix = "Speaker Amp"; }; @@ -302,13 +306,6 @@ regulator-name = "vdd-cpus"; }; -®_ldo_io0 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vcc-usb"; - status = "okay"; -}; - ®_rtc_ldo { regulator-name = "vcc-rtc"; }; @@ -357,7 +354,7 @@ }; &usbphy { - usb0_vbus-supply = <®_ldo_io0>; - usb1_vbus-supply = <®_ldo_io0>; + usb0_vbus-supply = <®_vcc5v0>; + usb1_vbus-supply = <®_vcc5v0>; status = "okay"; }; -- 2.23.0 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2020-01-19 16:31 UTC|newest] Thread overview: 46+ messages / expand[flat|nested] mbox.gz Atom feed top 2020-01-19 16:30 [PATCH 1/9] arm64: dts: allwinner: Enable button wakeup on Orange Pi PC2 Samuel Holland 2020-01-19 16:30 ` Samuel Holland 2020-01-19 16:30 ` [PATCH 2/9] arm64: dts: allwinner: pinebook: Remove unused vcc3v3 regulator Samuel Holland 2020-01-19 16:30 ` Samuel Holland 2020-01-21 9:04 ` Maxime Ripard 2020-01-21 9:04 ` Maxime Ripard 2020-01-19 16:30 ` [PATCH 3/9] arm64: dts: allwinner: pinebook: Remove unused AXP803 regulators Samuel Holland 2020-01-19 16:30 ` Samuel Holland 2020-01-21 9:05 ` Maxime Ripard 2020-01-21 9:05 ` Maxime Ripard 2020-01-21 18:49 ` Vasily Khoruzhick 2020-01-21 18:49 ` Vasily Khoruzhick 2020-01-22 3:14 ` Samuel Holland 2020-01-22 3:14 ` Samuel Holland 2020-01-24 16:33 ` Maxime Ripard 2020-01-24 16:33 ` Maxime Ripard 2020-01-24 23:11 ` Vasily Khoruzhick 2020-01-24 23:11 ` Vasily Khoruzhick 2020-02-14 15:03 ` Maxime Ripard 2020-02-14 15:03 ` Maxime Ripard 2020-01-19 16:30 ` [PATCH 4/9] arm64: dts: allwinner: pinebook: Sort device tree nodes Samuel Holland 2020-01-19 16:30 ` Samuel Holland 2020-01-21 9:06 ` Maxime Ripard 2020-01-21 9:06 ` Maxime Ripard 2020-01-19 16:31 ` [PATCH 5/9] arm64: dts: allwinner: pinebook: Make simplefb more consistent Samuel Holland 2020-01-19 16:31 ` Samuel Holland 2020-01-21 9:06 ` Maxime Ripard 2020-01-21 9:06 ` Maxime Ripard 2020-01-19 16:31 ` [PATCH 6/9] arm64: dts: allwinner: pinebook: Document MMC0 CD pin name Samuel Holland 2020-01-19 16:31 ` Samuel Holland 2020-01-21 9:06 ` Maxime Ripard 2020-01-21 9:06 ` Maxime Ripard 2020-01-19 16:31 ` [PATCH 7/9] arm64: dts: allwinner: pinebook: Add GPIO port regulators Samuel Holland 2020-01-19 16:31 ` Samuel Holland 2020-01-21 9:07 ` Maxime Ripard 2020-01-21 9:07 ` Maxime Ripard 2020-01-19 16:31 ` [PATCH 8/9] arm64: dts: allwinner: pinebook: Fix backlight regulator Samuel Holland 2020-01-19 16:31 ` Samuel Holland 2020-01-21 9:07 ` Maxime Ripard 2020-01-21 9:07 ` Maxime Ripard 2020-01-19 16:31 ` Samuel Holland [this message] 2020-01-19 16:31 ` [PATCH 9/9] arm64: dts: allwinner: pinebook: Fix 5v0 boost regulator Samuel Holland 2020-01-21 9:08 ` Maxime Ripard 2020-01-21 9:08 ` Maxime Ripard 2020-01-21 9:03 ` [PATCH 1/9] arm64: dts: allwinner: Enable button wakeup on Orange Pi PC2 Maxime Ripard 2020-01-21 9:03 ` Maxime Ripard
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20200119163104.13274-9-samuel@sholland.org \ --to=samuel@sholland.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-sunxi@googlegroups.com \ --cc=mark.rutland@arm.com \ --cc=mripard@kernel.org \ --cc=robh+dt@kernel.org \ --cc=wens@csie.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.