From: Jian Hu <jian.hu@amlogic.com>
To: Jerome Brunet <jbrunet@baylibre.com>,
Neil Armstrong <narmstrong@baylibre.com>
Cc: Jian Hu <jian.hu@amlogic.com>,
Kevin Hilman <khilman@baylibre.com>,
Rob Herring <robh@kernel.org>,
Martin Blumenstingl <martin.blumenstingl@googlemail.com>,
Michael Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@kernel.org>,
Qiufang Dai <qiufang.dai@amlogic.com>,
Jianxin Pan <jianxin.pan@amlogic.com>,
Victor Wan <victor.wan@amlogic.com>,
Chandle Zou <chandle.zou@amlogic.com>,
<linux-clk@vger.kernel.org>, <linux-amlogic@lists.infradead.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>
Subject: [PATCH v7 0/5] add Amlogic A1 clock controller driver
Date: Mon, 20 Jan 2020 11:49:32 +0800 [thread overview]
Message-ID: <20200120034937.128600-1-jian.hu@amlogic.com> (raw)
add support for Amlogic A1 clock driver, the clock includes
three parts: peripheral clocks, pll clocks, CPU clocks.
sys pll and CPU clocks will be sent in next patch.
Changes since v6 at [7]:
-fix 'dt_binding_check' compiling error
-add acked-by
Changes since v5 at [6]:
-fix yaml file
-add rst/current_en/l_detect parm detection
-remove 'meson_eeclkc_data' in a1.c and a1-pll.c
Changes since v4 at [5]:
- change yaml GPL
- drop meson-eeclk.c patch, add probe function in each driver
- add CLK_IS_CRITICAL for sys_clk clock, drop the flag for sys_a and sys_b
- add new parm for pll, add protection for rst parm
- drop flag for a1_fixed_pll
- remove the same comment for fclk_div, add "refer to"
- add critical flag for a1_sys_clk
- remove rtc table
- rename a1_dspa_en_dspa and a1_dspb_en_dspb
- remove useless comment
Changes since v3 at [3]:
-fix reparenting orphan failed, it depends on jerome's patch [4]
-fix changelist in v3 about reparenting orphan
-remove the dts patch
Changes since v2 at [2]:
-add probe function for A1
-seperate the clock driver into two patch
-change some clock flags and ops
-add support for a1 PLL ops
-add A1 clock node
-fix reparenting orphan clock failed, registering xtal_fixpll
and xtal_hifipll after the provider registration, it is not
a best way.
Changes since v1 at [1]:
-place A1 config alphabetically
-add actual reason for RO ops, CLK_IS_CRITICAL, CLK_IGNORE_UNUSED
-separate the driver into two driver: peripheral and pll driver
-delete CLK_IGNORE_UNUSED flag for pwm b/c/d/e/f clock, dsp clock
-delete the change in Kconfig.platforms, address to Kevin alone
-remove the useless comments
-modify the meson pll driver to support A1 PLLs
[1] https://lkml.kernel.org/r/1569411888-98116-1-git-send-email-jian.hu@amlogic.com
[2] https://lkml.kernel.org/r/1571382865-41978-1-git-send-email-jian.hu@amlogic.com
[3] https://lkml.kernel.org/r/20191129144605.182774-1-jian.hu@amlogic.com
[4] https://lkml.kernel.org/r/20191203080805.104628-1-jbrunet@baylibre.com
[5] https://lkml.kernel.org/r/20191206074052.15557-1-jian.hu@amlogic.com
[6] https://lkml.kernel.org/r/20191227094606.143637-1-jian.hu@amlogic.com
[7] https://lkml.kernel.org/r/20200116080440.118679-1-jian.hu@amlogic.com
Jian Hu (5):
dt-bindings: clock: meson: add A1 PLL clock controller bindings
clk: meson: add support for A1 PLL clock ops
clk: meson: a1: add support for Amlogic A1 PLL clock driver
dt-bindings: clock: meson: add A1 peripheral clock controller bindings
clk: meson: a1: add support for Amlogic A1 Peripheral clock driver
.../bindings/clock/amlogic,a1-clkc.yaml | 65 +
.../bindings/clock/amlogic,a1-pll-clkc.yaml | 52 +
drivers/clk/meson/Kconfig | 18 +
drivers/clk/meson/Makefile | 2 +
drivers/clk/meson/a1-pll.c | 360 +++
drivers/clk/meson/a1-pll.h | 56 +
drivers/clk/meson/a1.c | 2249 +++++++++++++++++
drivers/clk/meson/a1.h | 120 +
drivers/clk/meson/clk-pll.c | 47 +-
drivers/clk/meson/clk-pll.h | 2 +
include/dt-bindings/clock/a1-clkc.h | 98 +
include/dt-bindings/clock/a1-pll-clkc.h | 16 +
12 files changed, 3078 insertions(+), 7 deletions(-)
create mode 100644 Documentation/devicetree/bindings/clock/amlogic,a1-clkc.yaml
create mode 100644 Documentation/devicetree/bindings/clock/amlogic,a1-pll-clkc.yaml
create mode 100644 drivers/clk/meson/a1-pll.c
create mode 100644 drivers/clk/meson/a1-pll.h
create mode 100644 drivers/clk/meson/a1.c
create mode 100644 drivers/clk/meson/a1.h
create mode 100644 include/dt-bindings/clock/a1-clkc.h
create mode 100644 include/dt-bindings/clock/a1-pll-clkc.h
--
2.24.0
WARNING: multiple messages have this Message-ID (diff)
From: Jian Hu <jian.hu@amlogic.com>
To: Jerome Brunet <jbrunet@baylibre.com>,
Neil Armstrong <narmstrong@baylibre.com>
Cc: Rob Herring <robh@kernel.org>,
Victor Wan <victor.wan@amlogic.com>,
Jianxin Pan <jianxin.pan@amlogic.com>,
devicetree@vger.kernel.org,
Martin Blumenstingl <martin.blumenstingl@googlemail.com>,
Kevin Hilman <khilman@baylibre.com>,
Michael Turquette <mturquette@baylibre.com>,
linux-kernel@vger.kernel.org, Stephen Boyd <sboyd@kernel.org>,
Jian Hu <jian.hu@amlogic.com>,
linux-arm-kernel@lists.infradead.org,
Qiufang Dai <qiufang.dai@amlogic.com>,
linux-amlogic@lists.infradead.org, linux-clk@vger.kernel.org,
Chandle Zou <chandle.zou@amlogic.com>
Subject: [PATCH v7 0/5] add Amlogic A1 clock controller driver
Date: Mon, 20 Jan 2020 11:49:32 +0800 [thread overview]
Message-ID: <20200120034937.128600-1-jian.hu@amlogic.com> (raw)
add support for Amlogic A1 clock driver, the clock includes
three parts: peripheral clocks, pll clocks, CPU clocks.
sys pll and CPU clocks will be sent in next patch.
Changes since v6 at [7]:
-fix 'dt_binding_check' compiling error
-add acked-by
Changes since v5 at [6]:
-fix yaml file
-add rst/current_en/l_detect parm detection
-remove 'meson_eeclkc_data' in a1.c and a1-pll.c
Changes since v4 at [5]:
- change yaml GPL
- drop meson-eeclk.c patch, add probe function in each driver
- add CLK_IS_CRITICAL for sys_clk clock, drop the flag for sys_a and sys_b
- add new parm for pll, add protection for rst parm
- drop flag for a1_fixed_pll
- remove the same comment for fclk_div, add "refer to"
- add critical flag for a1_sys_clk
- remove rtc table
- rename a1_dspa_en_dspa and a1_dspb_en_dspb
- remove useless comment
Changes since v3 at [3]:
-fix reparenting orphan failed, it depends on jerome's patch [4]
-fix changelist in v3 about reparenting orphan
-remove the dts patch
Changes since v2 at [2]:
-add probe function for A1
-seperate the clock driver into two patch
-change some clock flags and ops
-add support for a1 PLL ops
-add A1 clock node
-fix reparenting orphan clock failed, registering xtal_fixpll
and xtal_hifipll after the provider registration, it is not
a best way.
Changes since v1 at [1]:
-place A1 config alphabetically
-add actual reason for RO ops, CLK_IS_CRITICAL, CLK_IGNORE_UNUSED
-separate the driver into two driver: peripheral and pll driver
-delete CLK_IGNORE_UNUSED flag for pwm b/c/d/e/f clock, dsp clock
-delete the change in Kconfig.platforms, address to Kevin alone
-remove the useless comments
-modify the meson pll driver to support A1 PLLs
[1] https://lkml.kernel.org/r/1569411888-98116-1-git-send-email-jian.hu@amlogic.com
[2] https://lkml.kernel.org/r/1571382865-41978-1-git-send-email-jian.hu@amlogic.com
[3] https://lkml.kernel.org/r/20191129144605.182774-1-jian.hu@amlogic.com
[4] https://lkml.kernel.org/r/20191203080805.104628-1-jbrunet@baylibre.com
[5] https://lkml.kernel.org/r/20191206074052.15557-1-jian.hu@amlogic.com
[6] https://lkml.kernel.org/r/20191227094606.143637-1-jian.hu@amlogic.com
[7] https://lkml.kernel.org/r/20200116080440.118679-1-jian.hu@amlogic.com
Jian Hu (5):
dt-bindings: clock: meson: add A1 PLL clock controller bindings
clk: meson: add support for A1 PLL clock ops
clk: meson: a1: add support for Amlogic A1 PLL clock driver
dt-bindings: clock: meson: add A1 peripheral clock controller bindings
clk: meson: a1: add support for Amlogic A1 Peripheral clock driver
.../bindings/clock/amlogic,a1-clkc.yaml | 65 +
.../bindings/clock/amlogic,a1-pll-clkc.yaml | 52 +
drivers/clk/meson/Kconfig | 18 +
drivers/clk/meson/Makefile | 2 +
drivers/clk/meson/a1-pll.c | 360 +++
drivers/clk/meson/a1-pll.h | 56 +
drivers/clk/meson/a1.c | 2249 +++++++++++++++++
drivers/clk/meson/a1.h | 120 +
drivers/clk/meson/clk-pll.c | 47 +-
drivers/clk/meson/clk-pll.h | 2 +
include/dt-bindings/clock/a1-clkc.h | 98 +
include/dt-bindings/clock/a1-pll-clkc.h | 16 +
12 files changed, 3078 insertions(+), 7 deletions(-)
create mode 100644 Documentation/devicetree/bindings/clock/amlogic,a1-clkc.yaml
create mode 100644 Documentation/devicetree/bindings/clock/amlogic,a1-pll-clkc.yaml
create mode 100644 drivers/clk/meson/a1-pll.c
create mode 100644 drivers/clk/meson/a1-pll.h
create mode 100644 drivers/clk/meson/a1.c
create mode 100644 drivers/clk/meson/a1.h
create mode 100644 include/dt-bindings/clock/a1-clkc.h
create mode 100644 include/dt-bindings/clock/a1-pll-clkc.h
--
2.24.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
WARNING: multiple messages have this Message-ID (diff)
From: Jian Hu <jian.hu@amlogic.com>
To: Jerome Brunet <jbrunet@baylibre.com>,
Neil Armstrong <narmstrong@baylibre.com>
Cc: Rob Herring <robh@kernel.org>,
Victor Wan <victor.wan@amlogic.com>,
Jianxin Pan <jianxin.pan@amlogic.com>,
devicetree@vger.kernel.org,
Martin Blumenstingl <martin.blumenstingl@googlemail.com>,
Kevin Hilman <khilman@baylibre.com>,
Michael Turquette <mturquette@baylibre.com>,
linux-kernel@vger.kernel.org, Stephen Boyd <sboyd@kernel.org>,
Jian Hu <jian.hu@amlogic.com>,
linux-arm-kernel@lists.infradead.org,
Qiufang Dai <qiufang.dai@amlogic.com>,
linux-amlogic@lists.infradead.org, linux-clk@vger.kernel.org,
Chandle Zou <chandle.zou@amlogic.com>
Subject: [PATCH v7 0/5] add Amlogic A1 clock controller driver
Date: Mon, 20 Jan 2020 11:49:32 +0800 [thread overview]
Message-ID: <20200120034937.128600-1-jian.hu@amlogic.com> (raw)
add support for Amlogic A1 clock driver, the clock includes
three parts: peripheral clocks, pll clocks, CPU clocks.
sys pll and CPU clocks will be sent in next patch.
Changes since v6 at [7]:
-fix 'dt_binding_check' compiling error
-add acked-by
Changes since v5 at [6]:
-fix yaml file
-add rst/current_en/l_detect parm detection
-remove 'meson_eeclkc_data' in a1.c and a1-pll.c
Changes since v4 at [5]:
- change yaml GPL
- drop meson-eeclk.c patch, add probe function in each driver
- add CLK_IS_CRITICAL for sys_clk clock, drop the flag for sys_a and sys_b
- add new parm for pll, add protection for rst parm
- drop flag for a1_fixed_pll
- remove the same comment for fclk_div, add "refer to"
- add critical flag for a1_sys_clk
- remove rtc table
- rename a1_dspa_en_dspa and a1_dspb_en_dspb
- remove useless comment
Changes since v3 at [3]:
-fix reparenting orphan failed, it depends on jerome's patch [4]
-fix changelist in v3 about reparenting orphan
-remove the dts patch
Changes since v2 at [2]:
-add probe function for A1
-seperate the clock driver into two patch
-change some clock flags and ops
-add support for a1 PLL ops
-add A1 clock node
-fix reparenting orphan clock failed, registering xtal_fixpll
and xtal_hifipll after the provider registration, it is not
a best way.
Changes since v1 at [1]:
-place A1 config alphabetically
-add actual reason for RO ops, CLK_IS_CRITICAL, CLK_IGNORE_UNUSED
-separate the driver into two driver: peripheral and pll driver
-delete CLK_IGNORE_UNUSED flag for pwm b/c/d/e/f clock, dsp clock
-delete the change in Kconfig.platforms, address to Kevin alone
-remove the useless comments
-modify the meson pll driver to support A1 PLLs
[1] https://lkml.kernel.org/r/1569411888-98116-1-git-send-email-jian.hu@amlogic.com
[2] https://lkml.kernel.org/r/1571382865-41978-1-git-send-email-jian.hu@amlogic.com
[3] https://lkml.kernel.org/r/20191129144605.182774-1-jian.hu@amlogic.com
[4] https://lkml.kernel.org/r/20191203080805.104628-1-jbrunet@baylibre.com
[5] https://lkml.kernel.org/r/20191206074052.15557-1-jian.hu@amlogic.com
[6] https://lkml.kernel.org/r/20191227094606.143637-1-jian.hu@amlogic.com
[7] https://lkml.kernel.org/r/20200116080440.118679-1-jian.hu@amlogic.com
Jian Hu (5):
dt-bindings: clock: meson: add A1 PLL clock controller bindings
clk: meson: add support for A1 PLL clock ops
clk: meson: a1: add support for Amlogic A1 PLL clock driver
dt-bindings: clock: meson: add A1 peripheral clock controller bindings
clk: meson: a1: add support for Amlogic A1 Peripheral clock driver
.../bindings/clock/amlogic,a1-clkc.yaml | 65 +
.../bindings/clock/amlogic,a1-pll-clkc.yaml | 52 +
drivers/clk/meson/Kconfig | 18 +
drivers/clk/meson/Makefile | 2 +
drivers/clk/meson/a1-pll.c | 360 +++
drivers/clk/meson/a1-pll.h | 56 +
drivers/clk/meson/a1.c | 2249 +++++++++++++++++
drivers/clk/meson/a1.h | 120 +
drivers/clk/meson/clk-pll.c | 47 +-
drivers/clk/meson/clk-pll.h | 2 +
include/dt-bindings/clock/a1-clkc.h | 98 +
include/dt-bindings/clock/a1-pll-clkc.h | 16 +
12 files changed, 3078 insertions(+), 7 deletions(-)
create mode 100644 Documentation/devicetree/bindings/clock/amlogic,a1-clkc.yaml
create mode 100644 Documentation/devicetree/bindings/clock/amlogic,a1-pll-clkc.yaml
create mode 100644 drivers/clk/meson/a1-pll.c
create mode 100644 drivers/clk/meson/a1-pll.h
create mode 100644 drivers/clk/meson/a1.c
create mode 100644 drivers/clk/meson/a1.h
create mode 100644 include/dt-bindings/clock/a1-clkc.h
create mode 100644 include/dt-bindings/clock/a1-pll-clkc.h
--
2.24.0
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
next reply other threads:[~2020-01-20 3:49 UTC|newest]
Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-01-20 3:49 Jian Hu [this message]
2020-01-20 3:49 ` [PATCH v7 0/5] add Amlogic A1 clock controller driver Jian Hu
2020-01-20 3:49 ` Jian Hu
2020-01-20 3:49 ` [PATCH v7 1/5] dt-bindings: clock: meson: add A1 PLL clock controller bindings Jian Hu
2020-01-20 3:49 ` Jian Hu
2020-01-20 3:49 ` Jian Hu
2020-01-21 22:00 ` Rob Herring
2020-01-21 22:00 ` Rob Herring
2020-01-21 22:00 ` Rob Herring
2020-02-04 3:12 ` Jian Hu
2020-02-04 3:12 ` Jian Hu
2020-02-04 3:12 ` Jian Hu
2020-01-20 3:49 ` [PATCH v7 2/5] clk: meson: add support for A1 PLL clock ops Jian Hu
2020-01-20 3:49 ` Jian Hu
2020-01-20 3:49 ` Jian Hu
2020-02-04 10:24 ` Jerome Brunet
2020-02-04 10:24 ` Jerome Brunet
2020-02-04 10:24 ` Jerome Brunet
2020-02-10 6:11 ` Jian Hu
2020-02-10 6:11 ` Jian Hu
2020-02-10 6:11 ` Jian Hu
2020-02-18 9:05 ` Jerome Brunet
2020-02-18 9:05 ` Jerome Brunet
2020-02-18 9:05 ` Jerome Brunet
2020-01-20 3:49 ` [PATCH v7 3/5] clk: meson: a1: add support for Amlogic A1 PLL clock driver Jian Hu
2020-01-20 3:49 ` Jian Hu
2020-01-20 3:49 ` Jian Hu
2020-02-04 13:13 ` Jerome Brunet
2020-02-04 13:13 ` Jerome Brunet
2020-02-04 13:13 ` Jerome Brunet
2020-02-10 6:16 ` Jian Hu
2020-02-10 6:16 ` Jian Hu
2020-02-10 6:16 ` Jian Hu
2020-01-20 3:49 ` [PATCH v7 4/5] dt-bindings: clock: meson: add A1 peripheral clock controller bindings Jian Hu
2020-01-20 3:49 ` Jian Hu
2020-01-20 3:49 ` Jian Hu
2020-01-29 5:44 ` Stephen Boyd
2020-01-29 5:44 ` Stephen Boyd
2020-01-29 5:44 ` Stephen Boyd
2020-01-20 3:49 ` [PATCH v7 5/5] clk: meson: a1: add support for Amlogic A1 Peripheral clock driver Jian Hu
2020-01-20 3:49 ` Jian Hu
2020-01-20 3:49 ` Jian Hu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200120034937.128600-1-jian.hu@amlogic.com \
--to=jian.hu@amlogic.com \
--cc=chandle.zou@amlogic.com \
--cc=devicetree@vger.kernel.org \
--cc=jbrunet@baylibre.com \
--cc=jianxin.pan@amlogic.com \
--cc=khilman@baylibre.com \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=martin.blumenstingl@googlemail.com \
--cc=mturquette@baylibre.com \
--cc=narmstrong@baylibre.com \
--cc=qiufang.dai@amlogic.com \
--cc=robh@kernel.org \
--cc=sboyd@kernel.org \
--cc=victor.wan@amlogic.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.