All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com>
To: dan.j.williams@intel.com, vishal.l.verma@intel.com, jmoyer@redhat.com
Cc: linux-nvdimm@lists.01.org,
	"Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com>
Subject: [PATCH v4 1/6] libnvdimm/namespace: Make namespace size validation arch dependent
Date: Mon, 20 Jan 2020 19:37:44 +0530	[thread overview]
Message-ID: <20200120140749.69549-2-aneesh.kumar@linux.ibm.com> (raw)
In-Reply-To: <20200120140749.69549-1-aneesh.kumar@linux.ibm.com>

The page size used to map the namespace is arch dependent. For example
architectures like ppc64 use 16MB page size for direct-mapping. If the namespace
size is not aligned to the mapping page size, users can observe kernel crash
during namespace init and destroy.

This is due to kernel doing partial map/unmap of the resource range

BUG: Unable to handle kernel data access at 0xc001000406000000
Faulting instruction address: 0xc000000000090790
NIP [c000000000090790] arch_add_memory+0xc0/0x130
LR [c000000000090744] arch_add_memory+0x74/0x130
Call Trace:
 arch_add_memory+0x74/0x130 (unreliable)
 memremap_pages+0x74c/0xa30
 devm_memremap_pages+0x3c/0xa0
 pmem_attach_disk+0x188/0x770
 nvdimm_bus_probe+0xd8/0x470
 really_probe+0x148/0x570
 driver_probe_device+0x19c/0x1d0
 device_driver_attach+0xcc/0x100
 bind_store+0x134/0x1c0
 drv_attr_store+0x44/0x60
 sysfs_kf_write+0x74/0xc0
 kernfs_fop_write+0x1b4/0x290
 __vfs_write+0x3c/0x70
 vfs_write+0xd0/0x260
 ksys_write+0xdc/0x130
 system_call+0x5c/0x68

Kernel should also ensure that namespace size is also mulitple of subsection size.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
---
 arch/arm64/mm/flush.c     | 6 ++++++
 arch/powerpc/lib/pmem.c   | 9 +++++++++
 arch/x86/mm/pageattr.c    | 7 +++++++
 include/linux/libnvdimm.h | 1 +
 4 files changed, 23 insertions(+)

diff --git a/arch/arm64/mm/flush.c b/arch/arm64/mm/flush.c
index ac485163a4a7..95cb5538bc6e 100644
--- a/arch/arm64/mm/flush.c
+++ b/arch/arm64/mm/flush.c
@@ -91,4 +91,10 @@ void arch_invalidate_pmem(void *addr, size_t size)
 	__inval_dcache_area(addr, size);
 }
 EXPORT_SYMBOL_GPL(arch_invalidate_pmem);
+
+unsigned long arch_namespace_map_size(void)
+{
+	return PAGE_SIZE;
+}
+EXPORT_SYMBOL_GPL(arch_namespace_map_size);
 #endif
diff --git a/arch/powerpc/lib/pmem.c b/arch/powerpc/lib/pmem.c
index 0666a8d29596..63dca24e4a18 100644
--- a/arch/powerpc/lib/pmem.c
+++ b/arch/powerpc/lib/pmem.c
@@ -26,6 +26,15 @@ void arch_invalidate_pmem(void *addr, size_t size)
 }
 EXPORT_SYMBOL_GPL(arch_invalidate_pmem);
 
+unsigned long arch_namespace_map_size(void)
+{
+	if (radix_enabled())
+		return PAGE_SIZE;
+	return (1UL << mmu_psize_defs[mmu_linear_psize].shift);
+
+}
+EXPORT_SYMBOL_GPL(arch_namespace_map_size);
+
 /*
  * CONFIG_ARCH_HAS_UACCESS_FLUSHCACHE symbols
  */
diff --git a/arch/x86/mm/pageattr.c b/arch/x86/mm/pageattr.c
index 1b99ad05b117..d78b5082f376 100644
--- a/arch/x86/mm/pageattr.c
+++ b/arch/x86/mm/pageattr.c
@@ -310,6 +310,13 @@ void arch_invalidate_pmem(void *addr, size_t size)
 }
 EXPORT_SYMBOL_GPL(arch_invalidate_pmem);
 
+unsigned long arch_namespace_map_size(void)
+{
+	return PAGE_SIZE;
+}
+EXPORT_SYMBOL_GPL(arch_namespace_map_size);
+
+
 static void __cpa_flush_all(void *arg)
 {
 	unsigned long cache = (unsigned long)arg;
diff --git a/include/linux/libnvdimm.h b/include/linux/libnvdimm.h
index 9df091bd30ba..a3476dbd2656 100644
--- a/include/linux/libnvdimm.h
+++ b/include/linux/libnvdimm.h
@@ -284,4 +284,5 @@ static inline void arch_invalidate_pmem(void *addr, size_t size)
 }
 #endif
 
+unsigned long arch_namespace_map_size(void);
 #endif /* __LIBNVDIMM_H__ */
-- 
2.24.1
_______________________________________________
Linux-nvdimm mailing list -- linux-nvdimm@lists.01.org
To unsubscribe send an email to linux-nvdimm-leave@lists.01.org

  reply	other threads:[~2020-01-20 14:08 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-01-20 14:07 [PATCH v4 0/6] Validating namespace size and start address attributes Aneesh Kumar K.V
2020-01-20 14:07 ` Aneesh Kumar K.V [this message]
2020-01-24  5:57   ` [PATCH v4 1/6] libnvdimm/namespace: Make namespace size validation arch dependent Dan Williams
2020-01-24  7:34     ` Aneesh Kumar K.V
2020-01-24 16:45       ` Dan Williams
2020-01-24 17:07         ` Aneesh Kumar K.V
2020-01-24 17:07           ` Aneesh Kumar K.V
2020-01-24 18:25           ` Dan Williams
2020-01-24 18:25             ` Dan Williams
2020-01-26 11:41             ` Aneesh Kumar K.V
2020-01-26 11:41               ` Aneesh Kumar K.V
2020-01-24 17:08         ` Aneesh Kumar K.V
2020-01-20 14:07 ` [PATCH v4 2/6] libnvdimm/namespace: Validate namespace start addr and size Aneesh Kumar K.V
2020-01-25  1:55   ` Dan Williams
2020-01-20 14:07 ` [PATCH v4 3/6] libnvdimm/namespace: Add arch dependent callback for namespace create time validation Aneesh Kumar K.V
2020-01-25  1:59   ` Dan Williams
2020-01-20 14:07 ` [PATCH v4 4/6] libnvdimm/namespace: Validate namespace size when creating a new namespace Aneesh Kumar K.V
2020-01-25  2:22   ` Dan Williams
2020-01-20 14:07 ` [PATCH v4 5/6] libnvdimm/namespace: Align DPA based on arch restrictions Aneesh Kumar K.V
2020-01-20 14:07 ` [PATCH v4 6/6] libnvdimm/namespace: Expose arch specific supported size align value Aneesh Kumar K.V

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200120140749.69549-2-aneesh.kumar@linux.ibm.com \
    --to=aneesh.kumar@linux.ibm.com \
    --cc=dan.j.williams@intel.com \
    --cc=jmoyer@redhat.com \
    --cc=linux-nvdimm@lists.01.org \
    --cc=vishal.l.verma@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.