All of lore.kernel.org
 help / color / mirror / Atom feed
From: Dmitry Safonov <dima@arista.com>
To: linux-kernel@vger.kernel.org
Cc: Dmitry Safonov <0x7f454c46@gmail.com>,
	Dmitry Safonov <dima@arista.com>,
	Guenter Roeck <linux@roeck-us.net>,
	Wim Van Sebroeck <wim@linux-watchdog.org>,
	linux-watchdog@vger.kernel.org
Subject: [RFC 1/2] watchdog: Check WDOG_STOP_ON_REBOOT in reboot notifier
Date: Tue, 21 Jan 2020 16:21:44 +0000	[thread overview]
Message-ID: <20200121162145.166334-2-dima@arista.com> (raw)
In-Reply-To: <20200121162145.166334-1-dima@arista.com>

Many watchdog drivers use watchdog_stop_on_reboot() helper in order
to stop the watchdog on system reboot. Unfortunately, this logic is
coded in driver's probe function and doesn't allows user to decide what
to do during shutdown/reboot.

On the other side, Xen and Qemu watchdog drivers (xen_wdt and i6300esb)
may be configured to either send NMI or turn off/reboot VM as
the watchdog action. As the kernel may stuck at any state, sending NMIs
can't reliably reboot the VM.

At Arista, we benefited from the following set-up: the emulated watchdogs
trigger VM reset and softdog is set to catch less severe conditions to
generate vmcore. Just before reboot watchdog's timeout is increased
to some good-enough value (3 mins). That keeps watchdog always running
and guarantees that VM doesn't stuck.

As a preparation to move the watchdog's decision to stop on reboot or
not in userspace, allow WDOG_STOP_ON_REBOOT to be set during runtime,
not only on driver's probing. Always register reboot notifier and check
WDOG_STOP_ON_REBOOT inside it (on actual reboot).

Signed-off-by: Dmitry Safonov <dima@arista.com>
---
 drivers/watchdog/watchdog_dev.c | 19 ++++++++++---------
 1 file changed, 10 insertions(+), 9 deletions(-)

diff --git a/drivers/watchdog/watchdog_dev.c b/drivers/watchdog/watchdog_dev.c
index 4b2a85438478..8766dd93028f 100644
--- a/drivers/watchdog/watchdog_dev.c
+++ b/drivers/watchdog/watchdog_dev.c
@@ -1103,6 +1103,10 @@ static int watchdog_reboot_notifier(struct notifier_block *nb,
 	struct watchdog_device *wdd;
 
 	wdd = container_of(nb, struct watchdog_device, reboot_nb);
+
+	if (!test_bit(WDOG_STOP_ON_REBOOT, &wdd->status))
+		return NOTIFY_DONE;
+
 	if (code == SYS_DOWN || code == SYS_HALT) {
 		if (watchdog_active(wdd)) {
 			int ret;
@@ -1139,16 +1143,13 @@ int watchdog_dev_register(struct watchdog_device *wdd)
 		return ret;
 	}
 
-	if (test_bit(WDOG_STOP_ON_REBOOT, &wdd->status)) {
-		wdd->reboot_nb.notifier_call = watchdog_reboot_notifier;
+	wdd->reboot_nb.notifier_call = watchdog_reboot_notifier;
 
-		ret = devm_register_reboot_notifier(&wdd->wd_data->dev,
-						    &wdd->reboot_nb);
-		if (ret) {
-			pr_err("watchdog%d: Cannot register reboot notifier (%d)\n",
-			       wdd->id, ret);
-			watchdog_dev_unregister(wdd);
-		}
+	ret = devm_register_reboot_notifier(&wdd->wd_data->dev, &wdd->reboot_nb);
+	if (ret) {
+		pr_err("watchdog%d: Cannot register reboot notifier (%d)\n",
+				wdd->id, ret);
+		watchdog_dev_unregister(wdd);
 	}
 
 	return ret;
-- 
2.25.0


  reply	other threads:[~2020-01-21 16:21 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-01-21 16:21 [RFC 0/2] watchdog: Provide user control over WDOG_STOP_ON_REBOOT Dmitry Safonov
2020-01-21 16:21 ` Dmitry Safonov [this message]
2020-01-21 16:21 ` [RFC 2/2] watchdog/uapi: Add WDIOS_{RUN,STOP}_ON_REBOOT Dmitry Safonov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200121162145.166334-2-dima@arista.com \
    --to=dima@arista.com \
    --cc=0x7f454c46@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-watchdog@vger.kernel.org \
    --cc=linux@roeck-us.net \
    --cc=wim@linux-watchdog.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.