From: Peter Ujfalusi <peter.ujfalusi@ti.com> To: <t-kristo@ti.com>, <nm@ti.com> Cc: <robh+dt@kernel.org>, <mark.rutland@arm.com>, <linux-arm-kernel@lists.infradead.org>, <devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org> Subject: [PATCH v2 0/9] arm64: dts: ti: UDMAP and McASP support Date: Wed, 22 Jan 2020 10:26:12 +0200 [thread overview] Message-ID: <20200122082621.4974-1-peter.ujfalusi@ti.com> (raw) Hi, Changes since v1: - rebased on ti-k3-next - Corrected j721e mcu_udma node: s/udmap/dma-controller - Moved the two McASP node patch at the end of the series The ringacc and UDMA documentation and drivers are in next-20200122. While adding the DMA support I have noticed few issues which is also fixed by this series. Tero: I have included the McASP nodes as well to have examples for other peripherals on how he binding should be used. The patches for the McASP driver is not in next, but they are only internal driver changes (and Kconfig), not adding new DT dependencies. Since the McASP is disabled in SoC dtsi due to board level configuration needs it is not going to erroneously probe drivers. It is up to you if you pick them or not, but I believe they serve a safe and nice example how the dma binding should be used for UDMA. Regards, Peter --- Peter Ujfalusi (9): arm64: dts: ti: k3-am65-main: Correct main NAVSS representation arm64: dts: ti: k3-am65-main: Move secure proxy under cbass_main_navss arm64: dts: ti: k3-am65: DMA support arm64: dts: ti: k3-j721e: Correct the address for MAIN NAVSS arm64: dts: ti: k3-j721e-main: Correct main NAVSS representation arm64: dts: ti: k3-j721e-main: Move secure proxy and smmu under main_navss arm64: dts: ti: k3-j721e: DMA support arm64: dts: ti: k3-am654-main: Add McASP nodes arm64: dts: ti: k3-j721e-main: Add McASP nodes arch/arm64/boot/dts/ti/k3-am65-main.dtsi | 122 ++++++- arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi | 46 +++ arch/arm64/boot/dts/ti/k3-j721e-main.dtsi | 313 ++++++++++++++++-- .../boot/dts/ti/k3-j721e-mcu-wakeup.dtsi | 45 +++ arch/arm64/boot/dts/ti/k3-j721e.dtsi | 2 +- 5 files changed, 491 insertions(+), 37 deletions(-) -- Peter Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
WARNING: multiple messages have this Message-ID (diff)
From: Peter Ujfalusi <peter.ujfalusi@ti.com> To: <t-kristo@ti.com>, <nm@ti.com> Cc: mark.rutland@arm.com, devicetree@vger.kernel.org, robh+dt@kernel.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org Subject: [PATCH v2 0/9] arm64: dts: ti: UDMAP and McASP support Date: Wed, 22 Jan 2020 10:26:12 +0200 [thread overview] Message-ID: <20200122082621.4974-1-peter.ujfalusi@ti.com> (raw) Hi, Changes since v1: - rebased on ti-k3-next - Corrected j721e mcu_udma node: s/udmap/dma-controller - Moved the two McASP node patch at the end of the series The ringacc and UDMA documentation and drivers are in next-20200122. While adding the DMA support I have noticed few issues which is also fixed by this series. Tero: I have included the McASP nodes as well to have examples for other peripherals on how he binding should be used. The patches for the McASP driver is not in next, but they are only internal driver changes (and Kconfig), not adding new DT dependencies. Since the McASP is disabled in SoC dtsi due to board level configuration needs it is not going to erroneously probe drivers. It is up to you if you pick them or not, but I believe they serve a safe and nice example how the dma binding should be used for UDMA. Regards, Peter --- Peter Ujfalusi (9): arm64: dts: ti: k3-am65-main: Correct main NAVSS representation arm64: dts: ti: k3-am65-main: Move secure proxy under cbass_main_navss arm64: dts: ti: k3-am65: DMA support arm64: dts: ti: k3-j721e: Correct the address for MAIN NAVSS arm64: dts: ti: k3-j721e-main: Correct main NAVSS representation arm64: dts: ti: k3-j721e-main: Move secure proxy and smmu under main_navss arm64: dts: ti: k3-j721e: DMA support arm64: dts: ti: k3-am654-main: Add McASP nodes arm64: dts: ti: k3-j721e-main: Add McASP nodes arch/arm64/boot/dts/ti/k3-am65-main.dtsi | 122 ++++++- arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi | 46 +++ arch/arm64/boot/dts/ti/k3-j721e-main.dtsi | 313 ++++++++++++++++-- .../boot/dts/ti/k3-j721e-mcu-wakeup.dtsi | 45 +++ arch/arm64/boot/dts/ti/k3-j721e.dtsi | 2 +- 5 files changed, 491 insertions(+), 37 deletions(-) -- Peter Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2020-01-22 8:25 UTC|newest] Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top 2020-01-22 8:26 Peter Ujfalusi [this message] 2020-01-22 8:26 ` [PATCH v2 0/9] arm64: dts: ti: UDMAP and McASP support Peter Ujfalusi 2020-01-22 8:26 ` [PATCH v2 1/9] arm64: dts: ti: k3-am65-main: Correct main NAVSS representation Peter Ujfalusi 2020-01-22 8:26 ` Peter Ujfalusi 2020-01-22 11:03 ` Lokesh Vutla 2020-01-22 11:03 ` Lokesh Vutla 2020-01-22 11:39 ` Peter Ujfalusi 2020-01-22 11:39 ` Peter Ujfalusi 2020-01-23 8:32 ` Lokesh Vutla 2020-01-23 8:32 ` Lokesh Vutla 2020-01-23 9:46 ` Peter Ujfalusi 2020-01-23 9:46 ` Peter Ujfalusi 2020-01-22 8:26 ` [PATCH v2 2/9] arm64: dts: ti: k3-am65-main: Move secure proxy under cbass_main_navss Peter Ujfalusi 2020-01-22 8:26 ` Peter Ujfalusi 2020-01-22 8:26 ` [PATCH v2 3/9] arm64: dts: ti: k3-am65: DMA support Peter Ujfalusi 2020-01-22 8:26 ` Peter Ujfalusi 2020-01-22 8:26 ` [PATCH v2 4/9] arm64: dts: ti: k3-j721e: Correct the address for MAIN NAVSS Peter Ujfalusi 2020-01-22 8:26 ` Peter Ujfalusi 2020-01-22 8:26 ` [PATCH v2 5/9] arm64: dts: ti: k3-j721e-main: Correct main NAVSS representation Peter Ujfalusi 2020-01-22 8:26 ` Peter Ujfalusi 2020-01-22 8:26 ` [PATCH v2 6/9] arm64: dts: ti: k3-j721e-main: Move secure proxy and smmu under main_navss Peter Ujfalusi 2020-01-22 8:26 ` Peter Ujfalusi 2020-01-22 8:26 ` [PATCH v2 7/9] arm64: dts: ti: k3-j721e: DMA support Peter Ujfalusi 2020-01-22 8:26 ` Peter Ujfalusi 2020-01-22 8:26 ` [PATCH v2 8/9] arm64: dts: ti: k3-am654-main: Add McASP nodes Peter Ujfalusi 2020-01-22 8:26 ` Peter Ujfalusi 2020-01-22 8:26 ` [PATCH v2 9/9] arm64: dts: ti: k3-j721e-main: " Peter Ujfalusi 2020-01-22 8:26 ` Peter Ujfalusi
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20200122082621.4974-1-peter.ujfalusi@ti.com \ --to=peter.ujfalusi@ti.com \ --cc=devicetree@vger.kernel.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=mark.rutland@arm.com \ --cc=nm@ti.com \ --cc=robh+dt@kernel.org \ --cc=t-kristo@ti.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.