From: Peter Ujfalusi <peter.ujfalusi@ti.com>
To: <t-kristo@ti.com>, <nm@ti.com>
Cc: <robh+dt@kernel.org>, <mark.rutland@arm.com>,
<linux-arm-kernel@lists.infradead.org>,
<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Subject: [PATCH v2 9/9] arm64: dts: ti: k3-j721e-main: Add McASP nodes
Date: Wed, 22 Jan 2020 10:26:21 +0200 [thread overview]
Message-ID: <20200122082621.4974-10-peter.ujfalusi@ti.com> (raw)
In-Reply-To: <20200122082621.4974-1-peter.ujfalusi@ti.com>
Add the nodes for McASP 0-11 and keep them disabled because several
required properties are not present as they are board specific.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
---
arch/arm64/boot/dts/ti/k3-j721e-main.dtsi | 228 ++++++++++++++++++++++
1 file changed, 228 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
index 180805aef39b..3043df5b3cad 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
@@ -735,4 +735,232 @@ ufs@4e84000 {
dma-coherent;
};
};
+
+ mcasp0: mcasp@02b00000 {
+ compatible = "ti,am33xx-mcasp-audio";
+ reg = <0x0 0x02b00000 0x0 0x2000>,
+ <0x0 0x02b08000 0x0 0x1000>;
+ reg-names = "mpu","dat";
+ interrupts = <GIC_SPI 544 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 545 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tx", "rx";
+
+ dmas = <&main_udmap 0xc400>, <&main_udmap 0x4400>;
+ dma-names = "tx", "rx";
+
+ clocks = <&k3_clks 174 1>;
+ clock-names = "fck";
+ power-domains = <&k3_pds 174 TI_SCI_PD_EXCLUSIVE>;
+
+ status = "disabled";
+ };
+
+ mcasp1: mcasp@02b10000 {
+ compatible = "ti,am33xx-mcasp-audio";
+ reg = <0x0 0x02b10000 0x0 0x2000>,
+ <0x0 0x02b18000 0x0 0x1000>;
+ reg-names = "mpu","dat";
+ interrupts = <GIC_SPI 546 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 547 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tx", "rx";
+
+ dmas = <&main_udmap 0xc401>, <&main_udmap 0x4401>;
+ dma-names = "tx", "rx";
+
+ clocks = <&k3_clks 175 1>;
+ clock-names = "fck";
+ power-domains = <&k3_pds 175 TI_SCI_PD_EXCLUSIVE>;
+
+ status = "disabled";
+ };
+
+ mcasp2: mcasp@02b20000 {
+ compatible = "ti,am33xx-mcasp-audio";
+ reg = <0x0 0x02b20000 0x0 0x2000>,
+ <0x0 0x02b28000 0x0 0x1000>;
+ reg-names = "mpu","dat";
+ interrupts = <GIC_SPI 548 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 549 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tx", "rx";
+
+ dmas = <&main_udmap 0xc402>, <&main_udmap 0x4402>;
+ dma-names = "tx", "rx";
+
+ clocks = <&k3_clks 176 1>;
+ clock-names = "fck";
+ power-domains = <&k3_pds 176 TI_SCI_PD_EXCLUSIVE>;
+
+ status = "disabled";
+ };
+
+ mcasp3: mcasp@02b30000 {
+ compatible = "ti,am33xx-mcasp-audio";
+ reg = <0x0 0x02b30000 0x0 0x2000>,
+ <0x0 0x02b38000 0x0 0x1000>;
+ reg-names = "mpu","dat";
+ interrupts = <GIC_SPI 550 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 551 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tx", "rx";
+
+ dmas = <&main_udmap 0xc500>, <&main_udmap 0x4500>;
+ dma-names = "tx", "rx";
+
+ clocks = <&k3_clks 177 1>;
+ clock-names = "fck";
+ power-domains = <&k3_pds 177 TI_SCI_PD_EXCLUSIVE>;
+
+ status = "disabled";
+ };
+
+ mcasp4: mcasp@02b40000 {
+ compatible = "ti,am33xx-mcasp-audio";
+ reg = <0x0 0x02b40000 0x0 0x2000>,
+ <0x0 0x02b48000 0x0 0x1000>;
+ reg-names = "mpu","dat";
+ interrupts = <GIC_SPI 552 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 553 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tx", "rx";
+
+ dmas = <&main_udmap 0xc501>, <&main_udmap 0x4501>;
+ dma-names = "tx", "rx";
+
+ clocks = <&k3_clks 178 1>;
+ clock-names = "fck";
+ power-domains = <&k3_pds 178 TI_SCI_PD_EXCLUSIVE>;
+
+ status = "disabled";
+ };
+
+ mcasp5: mcasp@02b50000 {
+ compatible = "ti,am33xx-mcasp-audio";
+ reg = <0x0 0x02b50000 0x0 0x2000>,
+ <0x0 0x02b58000 0x0 0x1000>;
+ reg-names = "mpu","dat";
+ interrupts = <GIC_SPI 554 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 555 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tx", "rx";
+
+ dmas = <&main_udmap 0xc502>, <&main_udmap 0x4502>;
+ dma-names = "tx", "rx";
+
+ clocks = <&k3_clks 179 1>;
+ clock-names = "fck";
+ power-domains = <&k3_pds 179 TI_SCI_PD_EXCLUSIVE>;
+
+ status = "disabled";
+ };
+
+ mcasp6: mcasp@02b60000 {
+ compatible = "ti,am33xx-mcasp-audio";
+ reg = <0x0 0x02b60000 0x0 0x2000>,
+ <0x0 0x02b68000 0x0 0x1000>;
+ reg-names = "mpu","dat";
+ interrupts = <GIC_SPI 556 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 557 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tx", "rx";
+
+ dmas = <&main_udmap 0xc503>, <&main_udmap 0x4503>;
+ dma-names = "tx", "rx";
+
+ clocks = <&k3_clks 180 1>;
+ clock-names = "fck";
+ power-domains = <&k3_pds 180 TI_SCI_PD_EXCLUSIVE>;
+
+ status = "disabled";
+ };
+
+ mcasp7: mcasp@02b70000 {
+ compatible = "ti,am33xx-mcasp-audio";
+ reg = <0x0 0x02b70000 0x0 0x2000>,
+ <0x0 0x02b78000 0x0 0x1000>;
+ reg-names = "mpu","dat";
+ interrupts = <GIC_SPI 558 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 559 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tx", "rx";
+
+ dmas = <&main_udmap 0xc504>, <&main_udmap 0x4504>;
+ dma-names = "tx", "rx";
+
+ clocks = <&k3_clks 181 1>;
+ clock-names = "fck";
+ power-domains = <&k3_pds 181 TI_SCI_PD_EXCLUSIVE>;
+
+ status = "disabled";
+ };
+
+ mcasp8: mcasp@02b80000 {
+ compatible = "ti,am33xx-mcasp-audio";
+ reg = <0x0 0x02b80000 0x0 0x2000>,
+ <0x0 0x02b88000 0x0 0x1000>;
+ reg-names = "mpu","dat";
+ interrupts = <GIC_SPI 560 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 561 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tx", "rx";
+
+ dmas = <&main_udmap 0xc505>, <&main_udmap 0x4505>;
+ dma-names = "tx", "rx";
+
+ clocks = <&k3_clks 182 1>;
+ clock-names = "fck";
+ power-domains = <&k3_pds 182 TI_SCI_PD_EXCLUSIVE>;
+
+ status = "disabled";
+ };
+
+ mcasp9: mcasp@02b90000 {
+ compatible = "ti,am33xx-mcasp-audio";
+ reg = <0x0 0x02b90000 0x0 0x2000>,
+ <0x0 0x02b98000 0x0 0x1000>;
+ reg-names = "mpu","dat";
+ interrupts = <GIC_SPI 562 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 563 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tx", "rx";
+
+ dmas = <&main_udmap 0xc506>, <&main_udmap 0x4506>;
+ dma-names = "tx", "rx";
+
+ clocks = <&k3_clks 183 1>;
+ clock-names = "fck";
+ power-domains = <&k3_pds 183 TI_SCI_PD_EXCLUSIVE>;
+
+ status = "disabled";
+ };
+
+ mcasp10: mcasp@02ba0000 {
+ compatible = "ti,am33xx-mcasp-audio";
+ reg = <0x0 0x02ba0000 0x0 0x2000>,
+ <0x0 0x02ba8000 0x0 0x1000>;
+ reg-names = "mpu","dat";
+ interrupts = <GIC_SPI 564 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 565 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tx", "rx";
+
+ dmas = <&main_udmap 0xc507>, <&main_udmap 0x4507>;
+ dma-names = "tx", "rx";
+
+ clocks = <&k3_clks 184 1>;
+ clock-names = "fck";
+ power-domains = <&k3_pds 184 TI_SCI_PD_EXCLUSIVE>;
+
+ status = "disabled";
+ };
+
+ mcasp11: mcasp@02bb0000 {
+ compatible = "ti,am33xx-mcasp-audio";
+ reg = <0x0 0x02bb0000 0x0 0x2000>,
+ <0x0 0x02bb8000 0x0 0x1000>;
+ reg-names = "mpu","dat";
+ interrupts = <GIC_SPI 566 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 567 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tx", "rx";
+
+ dmas = <&main_udmap 0xc508>, <&main_udmap 0x4508>;
+ dma-names = "tx", "rx";
+
+ clocks = <&k3_clks 185 1>;
+ clock-names = "fck";
+ power-domains = <&k3_pds 185 TI_SCI_PD_EXCLUSIVE>;
+
+ status = "disabled";
+ };
};
--
Peter
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
WARNING: multiple messages have this Message-ID (diff)
From: Peter Ujfalusi <peter.ujfalusi@ti.com>
To: <t-kristo@ti.com>, <nm@ti.com>
Cc: mark.rutland@arm.com, devicetree@vger.kernel.org,
robh+dt@kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 9/9] arm64: dts: ti: k3-j721e-main: Add McASP nodes
Date: Wed, 22 Jan 2020 10:26:21 +0200 [thread overview]
Message-ID: <20200122082621.4974-10-peter.ujfalusi@ti.com> (raw)
In-Reply-To: <20200122082621.4974-1-peter.ujfalusi@ti.com>
Add the nodes for McASP 0-11 and keep them disabled because several
required properties are not present as they are board specific.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
---
arch/arm64/boot/dts/ti/k3-j721e-main.dtsi | 228 ++++++++++++++++++++++
1 file changed, 228 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
index 180805aef39b..3043df5b3cad 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
@@ -735,4 +735,232 @@ ufs@4e84000 {
dma-coherent;
};
};
+
+ mcasp0: mcasp@02b00000 {
+ compatible = "ti,am33xx-mcasp-audio";
+ reg = <0x0 0x02b00000 0x0 0x2000>,
+ <0x0 0x02b08000 0x0 0x1000>;
+ reg-names = "mpu","dat";
+ interrupts = <GIC_SPI 544 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 545 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tx", "rx";
+
+ dmas = <&main_udmap 0xc400>, <&main_udmap 0x4400>;
+ dma-names = "tx", "rx";
+
+ clocks = <&k3_clks 174 1>;
+ clock-names = "fck";
+ power-domains = <&k3_pds 174 TI_SCI_PD_EXCLUSIVE>;
+
+ status = "disabled";
+ };
+
+ mcasp1: mcasp@02b10000 {
+ compatible = "ti,am33xx-mcasp-audio";
+ reg = <0x0 0x02b10000 0x0 0x2000>,
+ <0x0 0x02b18000 0x0 0x1000>;
+ reg-names = "mpu","dat";
+ interrupts = <GIC_SPI 546 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 547 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tx", "rx";
+
+ dmas = <&main_udmap 0xc401>, <&main_udmap 0x4401>;
+ dma-names = "tx", "rx";
+
+ clocks = <&k3_clks 175 1>;
+ clock-names = "fck";
+ power-domains = <&k3_pds 175 TI_SCI_PD_EXCLUSIVE>;
+
+ status = "disabled";
+ };
+
+ mcasp2: mcasp@02b20000 {
+ compatible = "ti,am33xx-mcasp-audio";
+ reg = <0x0 0x02b20000 0x0 0x2000>,
+ <0x0 0x02b28000 0x0 0x1000>;
+ reg-names = "mpu","dat";
+ interrupts = <GIC_SPI 548 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 549 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tx", "rx";
+
+ dmas = <&main_udmap 0xc402>, <&main_udmap 0x4402>;
+ dma-names = "tx", "rx";
+
+ clocks = <&k3_clks 176 1>;
+ clock-names = "fck";
+ power-domains = <&k3_pds 176 TI_SCI_PD_EXCLUSIVE>;
+
+ status = "disabled";
+ };
+
+ mcasp3: mcasp@02b30000 {
+ compatible = "ti,am33xx-mcasp-audio";
+ reg = <0x0 0x02b30000 0x0 0x2000>,
+ <0x0 0x02b38000 0x0 0x1000>;
+ reg-names = "mpu","dat";
+ interrupts = <GIC_SPI 550 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 551 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tx", "rx";
+
+ dmas = <&main_udmap 0xc500>, <&main_udmap 0x4500>;
+ dma-names = "tx", "rx";
+
+ clocks = <&k3_clks 177 1>;
+ clock-names = "fck";
+ power-domains = <&k3_pds 177 TI_SCI_PD_EXCLUSIVE>;
+
+ status = "disabled";
+ };
+
+ mcasp4: mcasp@02b40000 {
+ compatible = "ti,am33xx-mcasp-audio";
+ reg = <0x0 0x02b40000 0x0 0x2000>,
+ <0x0 0x02b48000 0x0 0x1000>;
+ reg-names = "mpu","dat";
+ interrupts = <GIC_SPI 552 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 553 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tx", "rx";
+
+ dmas = <&main_udmap 0xc501>, <&main_udmap 0x4501>;
+ dma-names = "tx", "rx";
+
+ clocks = <&k3_clks 178 1>;
+ clock-names = "fck";
+ power-domains = <&k3_pds 178 TI_SCI_PD_EXCLUSIVE>;
+
+ status = "disabled";
+ };
+
+ mcasp5: mcasp@02b50000 {
+ compatible = "ti,am33xx-mcasp-audio";
+ reg = <0x0 0x02b50000 0x0 0x2000>,
+ <0x0 0x02b58000 0x0 0x1000>;
+ reg-names = "mpu","dat";
+ interrupts = <GIC_SPI 554 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 555 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tx", "rx";
+
+ dmas = <&main_udmap 0xc502>, <&main_udmap 0x4502>;
+ dma-names = "tx", "rx";
+
+ clocks = <&k3_clks 179 1>;
+ clock-names = "fck";
+ power-domains = <&k3_pds 179 TI_SCI_PD_EXCLUSIVE>;
+
+ status = "disabled";
+ };
+
+ mcasp6: mcasp@02b60000 {
+ compatible = "ti,am33xx-mcasp-audio";
+ reg = <0x0 0x02b60000 0x0 0x2000>,
+ <0x0 0x02b68000 0x0 0x1000>;
+ reg-names = "mpu","dat";
+ interrupts = <GIC_SPI 556 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 557 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tx", "rx";
+
+ dmas = <&main_udmap 0xc503>, <&main_udmap 0x4503>;
+ dma-names = "tx", "rx";
+
+ clocks = <&k3_clks 180 1>;
+ clock-names = "fck";
+ power-domains = <&k3_pds 180 TI_SCI_PD_EXCLUSIVE>;
+
+ status = "disabled";
+ };
+
+ mcasp7: mcasp@02b70000 {
+ compatible = "ti,am33xx-mcasp-audio";
+ reg = <0x0 0x02b70000 0x0 0x2000>,
+ <0x0 0x02b78000 0x0 0x1000>;
+ reg-names = "mpu","dat";
+ interrupts = <GIC_SPI 558 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 559 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tx", "rx";
+
+ dmas = <&main_udmap 0xc504>, <&main_udmap 0x4504>;
+ dma-names = "tx", "rx";
+
+ clocks = <&k3_clks 181 1>;
+ clock-names = "fck";
+ power-domains = <&k3_pds 181 TI_SCI_PD_EXCLUSIVE>;
+
+ status = "disabled";
+ };
+
+ mcasp8: mcasp@02b80000 {
+ compatible = "ti,am33xx-mcasp-audio";
+ reg = <0x0 0x02b80000 0x0 0x2000>,
+ <0x0 0x02b88000 0x0 0x1000>;
+ reg-names = "mpu","dat";
+ interrupts = <GIC_SPI 560 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 561 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tx", "rx";
+
+ dmas = <&main_udmap 0xc505>, <&main_udmap 0x4505>;
+ dma-names = "tx", "rx";
+
+ clocks = <&k3_clks 182 1>;
+ clock-names = "fck";
+ power-domains = <&k3_pds 182 TI_SCI_PD_EXCLUSIVE>;
+
+ status = "disabled";
+ };
+
+ mcasp9: mcasp@02b90000 {
+ compatible = "ti,am33xx-mcasp-audio";
+ reg = <0x0 0x02b90000 0x0 0x2000>,
+ <0x0 0x02b98000 0x0 0x1000>;
+ reg-names = "mpu","dat";
+ interrupts = <GIC_SPI 562 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 563 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tx", "rx";
+
+ dmas = <&main_udmap 0xc506>, <&main_udmap 0x4506>;
+ dma-names = "tx", "rx";
+
+ clocks = <&k3_clks 183 1>;
+ clock-names = "fck";
+ power-domains = <&k3_pds 183 TI_SCI_PD_EXCLUSIVE>;
+
+ status = "disabled";
+ };
+
+ mcasp10: mcasp@02ba0000 {
+ compatible = "ti,am33xx-mcasp-audio";
+ reg = <0x0 0x02ba0000 0x0 0x2000>,
+ <0x0 0x02ba8000 0x0 0x1000>;
+ reg-names = "mpu","dat";
+ interrupts = <GIC_SPI 564 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 565 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tx", "rx";
+
+ dmas = <&main_udmap 0xc507>, <&main_udmap 0x4507>;
+ dma-names = "tx", "rx";
+
+ clocks = <&k3_clks 184 1>;
+ clock-names = "fck";
+ power-domains = <&k3_pds 184 TI_SCI_PD_EXCLUSIVE>;
+
+ status = "disabled";
+ };
+
+ mcasp11: mcasp@02bb0000 {
+ compatible = "ti,am33xx-mcasp-audio";
+ reg = <0x0 0x02bb0000 0x0 0x2000>,
+ <0x0 0x02bb8000 0x0 0x1000>;
+ reg-names = "mpu","dat";
+ interrupts = <GIC_SPI 566 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 567 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tx", "rx";
+
+ dmas = <&main_udmap 0xc508>, <&main_udmap 0x4508>;
+ dma-names = "tx", "rx";
+
+ clocks = <&k3_clks 185 1>;
+ clock-names = "fck";
+ power-domains = <&k3_pds 185 TI_SCI_PD_EXCLUSIVE>;
+
+ status = "disabled";
+ };
};
--
Peter
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2020-01-22 8:26 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-01-22 8:26 [PATCH v2 0/9] arm64: dts: ti: UDMAP and McASP support Peter Ujfalusi
2020-01-22 8:26 ` Peter Ujfalusi
2020-01-22 8:26 ` [PATCH v2 1/9] arm64: dts: ti: k3-am65-main: Correct main NAVSS representation Peter Ujfalusi
2020-01-22 8:26 ` Peter Ujfalusi
2020-01-22 11:03 ` Lokesh Vutla
2020-01-22 11:03 ` Lokesh Vutla
2020-01-22 11:39 ` Peter Ujfalusi
2020-01-22 11:39 ` Peter Ujfalusi
2020-01-23 8:32 ` Lokesh Vutla
2020-01-23 8:32 ` Lokesh Vutla
2020-01-23 9:46 ` Peter Ujfalusi
2020-01-23 9:46 ` Peter Ujfalusi
2020-01-22 8:26 ` [PATCH v2 2/9] arm64: dts: ti: k3-am65-main: Move secure proxy under cbass_main_navss Peter Ujfalusi
2020-01-22 8:26 ` Peter Ujfalusi
2020-01-22 8:26 ` [PATCH v2 3/9] arm64: dts: ti: k3-am65: DMA support Peter Ujfalusi
2020-01-22 8:26 ` Peter Ujfalusi
2020-01-22 8:26 ` [PATCH v2 4/9] arm64: dts: ti: k3-j721e: Correct the address for MAIN NAVSS Peter Ujfalusi
2020-01-22 8:26 ` Peter Ujfalusi
2020-01-22 8:26 ` [PATCH v2 5/9] arm64: dts: ti: k3-j721e-main: Correct main NAVSS representation Peter Ujfalusi
2020-01-22 8:26 ` Peter Ujfalusi
2020-01-22 8:26 ` [PATCH v2 6/9] arm64: dts: ti: k3-j721e-main: Move secure proxy and smmu under main_navss Peter Ujfalusi
2020-01-22 8:26 ` Peter Ujfalusi
2020-01-22 8:26 ` [PATCH v2 7/9] arm64: dts: ti: k3-j721e: DMA support Peter Ujfalusi
2020-01-22 8:26 ` Peter Ujfalusi
2020-01-22 8:26 ` [PATCH v2 8/9] arm64: dts: ti: k3-am654-main: Add McASP nodes Peter Ujfalusi
2020-01-22 8:26 ` Peter Ujfalusi
2020-01-22 8:26 ` Peter Ujfalusi [this message]
2020-01-22 8:26 ` [PATCH v2 9/9] arm64: dts: ti: k3-j721e-main: " Peter Ujfalusi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200122082621.4974-10-peter.ujfalusi@ti.com \
--to=peter.ujfalusi@ti.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=nm@ti.com \
--cc=robh+dt@kernel.org \
--cc=t-kristo@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.