All of lore.kernel.org
 help / color / mirror / Atom feed
From: Markus Theil <markus.theil@tu-ilmenau.de>
To: johannes@sipsolutions.net
Cc: linux-wireless@vger.kernel.org,
	Markus Theil <markus.theil@tu-ilmenau.de>
Subject: [PATCH] iw: scan: print radio measurement capabilities
Date: Wed, 22 Jan 2020 21:06:16 +0100	[thread overview]
Message-ID: <20200122200616.7897-1-markus.theil@tu-ilmenau.de> (raw)

Signed-off-by: Markus Theil <markus.theil@tu-ilmenau.de>
---
 scan.c | 56 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 56 insertions(+)

diff --git a/scan.c b/scan.c
index bfd39e4..fd522d4 100644
--- a/scan.c
+++ b/scan.c
@@ -582,6 +582,61 @@ static void print_supprates(const uint8_t type, uint8_t len,
 	printf("\n");
 }
 
+static void print_rm_enabled_capabilities(const uint8_t type, uint8_t len,
+			    const uint8_t *data,
+			    const struct print_ies_data *ie_buffer)
+{
+	__u64 capa = data[0] |
+		     data[1] << 8 |
+		     data[2] << 16 |
+		     data[3] << 24 |
+		     ((__u64) data[4]) << 32;
+
+	printf("\n");
+	printf("\t\tCapabilities: 0x%02x 0x%02x 0x%02x 0x%02x 0x%02x\n",
+							     data[0], data[1],
+							     data[2], data[3],
+							     data[4]);
+
+#define PRINT_RM_CAPA(_bit, _str) \
+	do { \
+		if (capa & BIT(_bit)) \
+			printf("\t\t\t" _str "\n"); \
+	} while (0)
+
+	PRINT_RM_CAPA(0, "Link Measurement");
+	PRINT_RM_CAPA(1, "Neighbor Report");
+	PRINT_RM_CAPA(2, "Parallel Measurements");
+	PRINT_RM_CAPA(3, "Repeated Measurements");
+	PRINT_RM_CAPA(4, "Beacon Passive Measurement");
+	PRINT_RM_CAPA(5, "Beacon Active");
+	PRINT_RM_CAPA(6, "Beacon Table Measurement");
+	PRINT_RM_CAPA(7, "Beacon Measurement Reporting Conditions");
+	PRINT_RM_CAPA(8, "Frame Measurement");
+	PRINT_RM_CAPA(9, "Channel Load");
+	PRINT_RM_CAPA(10, "Noise Histogram Measurement");
+	PRINT_RM_CAPA(11, "Statistics Measurement");
+	PRINT_RM_CAPA(12, "LCI Measurement");
+	PRINT_RM_CAPA(13, "LCI Azimuth");
+	PRINT_RM_CAPA(14, "Transmit Stream/Category Measurement");
+	PRINT_RM_CAPA(15, "Triggered Transmit Stream/Category");
+	PRINT_RM_CAPA(16, "AP Channel Report");
+	PRINT_RM_CAPA(17, "RM MIB Capability");
+
+	PRINT_RM_CAPA(27, "Measurement Pilot Transmission Information");
+	PRINT_RM_CAPA(28, "Neighbor Report TSF Offset");
+	PRINT_RM_CAPA(29, "RCPI Measurement");
+	PRINT_RM_CAPA(30, "RSNI Measurement");
+	PRINT_RM_CAPA(31, "BSS Average Access Delay");
+	PRINT_RM_CAPA(32, "BSS Available Admission");
+	PRINT_RM_CAPA(33, "Antenna");
+	PRINT_RM_CAPA(34, "FTM Range Report");
+	PRINT_RM_CAPA(35, "Civic Location Measurement");
+
+	printf("\t\tNonoperating Channel Max Measurement Duration: %i\n", data[3] >> 5);
+	printf("\t\tMeasurement Pilot Capability: %i\n", data[4] & 7);
+}
+
 static void print_ds(const uint8_t type, uint8_t len, const uint8_t *data,
 		     const struct print_ies_data *ie_buffer)
 {
@@ -1540,6 +1595,7 @@ static const struct ie_print ieprinters[] = {
 	[192] = { "VHT operation", print_vht_oper, 5, 255, BIT(PRINT_SCAN), },
 	[48] = { "RSN", print_rsn, 2, 255, BIT(PRINT_SCAN), },
 	[50] = { "Extended supported rates", print_supprates, 0, 255, BIT(PRINT_SCAN), },
+	[70] = { "RM enabled capabilities", print_rm_enabled_capabilities, 5, 5, BIT(PRINT_SCAN), },
 	[113] = { "MESH Configuration", print_mesh_conf, 7, 7, BIT(PRINT_SCAN), },
 	[114] = { "MESH ID", print_ssid, 0, 32, BIT(PRINT_SCAN) | BIT(PRINT_LINK), },
 	[127] = { "Extended capabilities", print_capabilities, 0, 255, BIT(PRINT_SCAN), },
-- 
2.25.0


                 reply	other threads:[~2020-01-22 20:06 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200122200616.7897-1-markus.theil@tu-ilmenau.de \
    --to=markus.theil@tu-ilmenau.de \
    --cc=johannes@sipsolutions.net \
    --cc=linux-wireless@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.