[PATCH 2/4] ARM: dts: rockchip: Sync rk3288-vyasa dts from linux

[Jagan Teki <jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>]

Sync rk3288-vyasa dts file from Linux.

This sync has changes required to work HDMI output on
Vyasa RK3288 board.

This sync excludes the io_domains node since it is not
available in rk3288.dtsi.

Changes like vcc50_hdmi, vdd10_lcd and ddc-i2c-bus are
not merged to Linux yet but wil resync later if any
further updates on this.

Signed-off-by: Jagan Teki <jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
---
 arch/arm/dts/rk3288-vyasa.dts | 79 ++++++++++++++---------------------
 1 file changed, 32 insertions(+), 47 deletions(-)

diff --git a/arch/arm/dts/rk3288-vyasa.dts b/arch/arm/dts/rk3288-vyasa.dts
index 850aa25818..4193f7208c 100644
--- a/arch/arm/dts/rk3288-vyasa.dts
+++ b/arch/arm/dts/rk3288-vyasa.dts
@@ -1,43 +1,6 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Copyright (C) 2017 Jagan Teki <jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
@@ -115,6 +78,17 @@
 		vin-supply = <&vcc_io>;
 	};
 
+	vcc50_hdmi: vcc50-hdmi {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc50_hdmi";
+		enable-active-high;
+		gpio = <&gpio7 RK_PB4 GPIO_ACTIVE_HIGH>; /* HDMI_EN */
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc50_hdmi_en>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vsus_5v>;
+	};
 	vusb1_5v: vusb1-5v {
 		compatible = "regulator-fixed";
 		regulator-name = "vusb1_5v";
@@ -158,7 +132,6 @@
 &emmc {
 	bus-width = <8>;
 	cap-mmc-highspeed;
-	disable-wp;
 	non-removable;
 	pinctrl-names = "default";
 	pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_pwr &emmc_bus8>;
@@ -188,7 +161,7 @@
 };
 
 &hdmi {
-	ddc-i2c-bus = <&i2c2>;
+	ddc-i2c-bus = <&i2c5>;
 	status = "okay";
 };
 
@@ -324,15 +297,15 @@
 				};
 			};
 
-			vcc10_lcd: LDO_REG6 {
-				regulator-name = "vcc10_lcd";
+			vdd10_lcd: LDO_REG6 {
+				regulator-name = "vdd10_lcd";
 				regulator-min-microvolt = <1000000>;
 				regulator-max-microvolt = <1000000>;
 				regulator-always-on;
 				regulator-boot-on;
 				regulator-state-mem {
 					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <1800000>;
+					regulator-suspend-microvolt = <1000000>;
 				};
 			};
 
@@ -385,7 +358,7 @@
 	};
 };
 
-&i2c2 {
+&i2c5 {
 	status = "okay";
 };
 
@@ -402,6 +375,12 @@
 	status = "okay";
 };
 
+&tsadc {
+	rockchip,hw-tshut-mode = <1>; /* tshut mode 0:CRU 1:GPIO */
+	rockchip,hw-tshut-polarity = <1>; /* tshut polarity 0:LOW 1:HIGH */
+	status = "okay";
+};
+
 &uart2 {
 	status = "okay";
 };
@@ -463,15 +442,21 @@
 		};
 	};
 
+	hdmi {
+		vcc50_hdmi_en: vcc50-hdmi-en {
+			rockchip,pins = <7 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
 	pmic {
 		pmic_int: pmic-int {
-			rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO &pcfg_pull_up>;
+			rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 	};
 
 	usb_host {
 		phy_pwr_en: phy-pwr-en {
-			rockchip,pins = <RK_GPIO2 RK_PB1 RK_FUNC_GPIO &pcfg_output_high>;
+			rockchip,pins = <2 RK_PB1 RK_FUNC_GPIO &pcfg_output_high>;
 		};
 
 		usb2_pwr_en: usb2-pwr-en {
@@ -481,7 +466,7 @@
 
 	usb_otg {
 		otg_vbus_drv: otg-vbus-drv {
-			rockchip,pins = <RK_GPIO0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
+			rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
 
 		};
 	};
-- 
2.18.0.321.gffc6fa0e3