[Intel-gfx] [PATCH 6/8] drm/i915/gt: Expose preempt reset timeout via sysfs

[Chris Wilson <chris@chris-wilson.co.uk>]

After initialising a preemption request, we give the current resident a
small amount of time to vacate the GPU. The preemption request is for a
higher priority context and should be immediate to maintain high
quality of service (and avoid priority inversion). However, the
preemption granularity of the GPU can be quite coarse and so we need a
compromise.

The preempt timeout can be adjusted per-engine using,

	/sys/class/drm/card?/engine/*/preempt_timeout_ms

and can be disabled by setting it to 0.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Steve Carbonari <steven.carbonari@intel.com>
Tested-by: Steve Carbonari <steven.carbonari@intel.com>
---
 drivers/gpu/drm/i915/Kconfig.profile    |  3 ++
 drivers/gpu/drm/i915/gt/sysfs_engines.c | 48 +++++++++++++++++++++++++
 2 files changed, 51 insertions(+)

diff --git a/drivers/gpu/drm/i915/Kconfig.profile b/drivers/gpu/drm/i915/Kconfig.profile
index 5f4ec3aec1d2..1f4e98a8532f 100644
--- a/drivers/gpu/drm/i915/Kconfig.profile
+++ b/drivers/gpu/drm/i915/Kconfig.profile
@@ -33,6 +33,9 @@ config DRM_I915_PREEMPT_TIMEOUT
 	  expires, the HW will be reset to allow the more important context
 	  to execute.
 
+	  This is adjustable via
+	  /sys/class/drm/card?/engine/*/preempt_timeout_ms
+
 	  May be 0 to disable the timeout.
 
 config DRM_I915_MAX_REQUEST_BUSYWAIT
diff --git a/drivers/gpu/drm/i915/gt/sysfs_engines.c b/drivers/gpu/drm/i915/gt/sysfs_engines.c
index 93ab6e880fc3..1ebb221bd1cb 100644
--- a/drivers/gpu/drm/i915/gt/sysfs_engines.c
+++ b/drivers/gpu/drm/i915/gt/sysfs_engines.c
@@ -271,6 +271,50 @@ stop_show(struct kobject *kobj, struct kobj_attribute *attr, char *buf)
 static struct kobj_attribute stop_timeout_attr =
 __ATTR(stop_timeout_ms, 0644, stop_show, stop_store);
 
+static ssize_t
+preempt_timeout_store(struct kobject *kobj, struct kobj_attribute *attr,
+		      const char *buf, size_t count)
+{
+	struct intel_engine_cs *engine = kobj_to_engine(kobj);
+	unsigned long long timeout;
+	int err;
+
+	/*
+	 * After initialising a preemption request, we give the current
+	 * resident a small amount of time to vacate the GPU. The preemption
+	 * request is for a higher priority context and should be immediate to
+	 * maintain high quality of service (and avoid priority inversion).
+	 * However, the preemption granularity of the GPU can be quite coarse
+	 * and so we need a compromise.
+	 */
+
+	err = kstrtoull(buf, 0, &timeout);
+	if (err)
+		return err;
+
+	if (timeout > jiffies_to_msecs(MAX_SCHEDULE_TIMEOUT))
+		return -EINVAL;
+
+	WRITE_ONCE(engine->props.preempt_timeout_ms, timeout);
+
+	if (READ_ONCE(engine->execlists.pending[0]))
+		set_timer_ms(&engine->execlists.preempt, timeout);
+
+	return count;
+}
+
+static ssize_t
+preempt_timeout_show(struct kobject *kobj, struct kobj_attribute *attr,
+		     char *buf)
+{
+	struct intel_engine_cs *engine = kobj_to_engine(kobj);
+
+	return sprintf(buf, "%lu\n", engine->props.preempt_timeout_ms);
+}
+
+static struct kobj_attribute preempt_timeout_attr =
+__ATTR(preempt_timeout_ms, 0644, preempt_timeout_show, preempt_timeout_store);
+
 static void kobj_engine_release(struct kobject *kobj)
 {
 	kfree(kobj);
@@ -341,6 +385,10 @@ void intel_engines_add_sysfs(struct drm_i915_private *i915)
 		    sysfs_create_file(kobj, &timeslice_duration_attr.attr))
 			goto err_engine;
 
+		if (intel_engine_has_preempt_reset(engine) &&
+		    sysfs_create_file(kobj, &preempt_timeout_attr.attr))
+			goto err_engine;
+
 		if (0) {
 err_object:
 			kobject_put(kobj);
-- 
2.25.0

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx