From: Ludovic Barre <ludovic.barre@st.com> To: Ulf Hansson <ulf.hansson@linaro.org>, Rob Herring <robh+dt@kernel.org> Cc: <srinivas.kandagatla@linaro.org>, Maxime Coquelin <mcoquelin.stm32@gmail.com>, Alexandre Torgue <alexandre.torgue@st.com>, <linux-arm-kernel@lists.infradead.org>, <linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>, <linux-mmc@vger.kernel.org>, <linux-stm32@st-md-mailman.stormreply.com>, Ludovic Barre <ludovic.barre@st.com> Subject: [PATCH V2 1/9] mmc: mmci: sdmmc: replace sg_dma_xxx macros Date: Tue, 28 Jan 2020 10:06:28 +0100 [thread overview] Message-ID: <20200128090636.13689-2-ludovic.barre@st.com> (raw) In-Reply-To: <20200128090636.13689-1-ludovic.barre@st.com> sg_dma_xxx should be used after a dma_map_sg call has been done to get bus addresses of each of the SG entries and their lengths. But mmci_host_ops validate_data can be called before dma_map_sg. This patch replaces theses macros by sg->offset and sg->length which are always defined. Signed-off-by: Ludovic Barre <ludovic.barre@st.com> --- drivers/mmc/host/mmci_stm32_sdmmc.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/mmc/host/mmci_stm32_sdmmc.c b/drivers/mmc/host/mmci_stm32_sdmmc.c index a4f7e8e689d3..6ccfbbc82c77 100644 --- a/drivers/mmc/host/mmci_stm32_sdmmc.c +++ b/drivers/mmc/host/mmci_stm32_sdmmc.c @@ -36,8 +36,8 @@ static int sdmmc_idma_validate_data(struct mmci_host *host, * excepted the last element which has no constraint on idmasize */ for_each_sg(data->sg, sg, data->sg_len - 1, i) { - if (!IS_ALIGNED(sg_dma_address(data->sg), sizeof(u32)) || - !IS_ALIGNED(sg_dma_len(data->sg), SDMMC_IDMA_BURST)) { + if (!IS_ALIGNED(data->sg->offset, sizeof(u32)) || + !IS_ALIGNED(data->sg->length, SDMMC_IDMA_BURST)) { dev_err(mmc_dev(host->mmc), "unaligned scatterlist: ofst:%x length:%d\n", data->sg->offset, data->sg->length); @@ -45,7 +45,7 @@ static int sdmmc_idma_validate_data(struct mmci_host *host, } } - if (!IS_ALIGNED(sg_dma_address(data->sg), sizeof(u32))) { + if (!IS_ALIGNED(data->sg->offset, sizeof(u32))) { dev_err(mmc_dev(host->mmc), "unaligned last scatterlist: ofst:%x length:%d\n", data->sg->offset, data->sg->length); -- 2.17.1
WARNING: multiple messages have this Message-ID (diff)
From: Ludovic Barre <ludovic.barre@st.com> To: Ulf Hansson <ulf.hansson@linaro.org>, Rob Herring <robh+dt@kernel.org> Cc: devicetree@vger.kernel.org, Alexandre Torgue <alexandre.torgue@st.com>, linux-mmc@vger.kernel.org, linux-kernel@vger.kernel.org, srinivas.kandagatla@linaro.org, Ludovic Barre <ludovic.barre@st.com>, Maxime Coquelin <mcoquelin.stm32@gmail.com>, linux-stm32@st-md-mailman.stormreply.com, linux-arm-kernel@lists.infradead.org Subject: [PATCH V2 1/9] mmc: mmci: sdmmc: replace sg_dma_xxx macros Date: Tue, 28 Jan 2020 10:06:28 +0100 [thread overview] Message-ID: <20200128090636.13689-2-ludovic.barre@st.com> (raw) In-Reply-To: <20200128090636.13689-1-ludovic.barre@st.com> sg_dma_xxx should be used after a dma_map_sg call has been done to get bus addresses of each of the SG entries and their lengths. But mmci_host_ops validate_data can be called before dma_map_sg. This patch replaces theses macros by sg->offset and sg->length which are always defined. Signed-off-by: Ludovic Barre <ludovic.barre@st.com> --- drivers/mmc/host/mmci_stm32_sdmmc.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/mmc/host/mmci_stm32_sdmmc.c b/drivers/mmc/host/mmci_stm32_sdmmc.c index a4f7e8e689d3..6ccfbbc82c77 100644 --- a/drivers/mmc/host/mmci_stm32_sdmmc.c +++ b/drivers/mmc/host/mmci_stm32_sdmmc.c @@ -36,8 +36,8 @@ static int sdmmc_idma_validate_data(struct mmci_host *host, * excepted the last element which has no constraint on idmasize */ for_each_sg(data->sg, sg, data->sg_len - 1, i) { - if (!IS_ALIGNED(sg_dma_address(data->sg), sizeof(u32)) || - !IS_ALIGNED(sg_dma_len(data->sg), SDMMC_IDMA_BURST)) { + if (!IS_ALIGNED(data->sg->offset, sizeof(u32)) || + !IS_ALIGNED(data->sg->length, SDMMC_IDMA_BURST)) { dev_err(mmc_dev(host->mmc), "unaligned scatterlist: ofst:%x length:%d\n", data->sg->offset, data->sg->length); @@ -45,7 +45,7 @@ static int sdmmc_idma_validate_data(struct mmci_host *host, } } - if (!IS_ALIGNED(sg_dma_address(data->sg), sizeof(u32))) { + if (!IS_ALIGNED(data->sg->offset, sizeof(u32))) { dev_err(mmc_dev(host->mmc), "unaligned last scatterlist: ofst:%x length:%d\n", data->sg->offset, data->sg->length); -- 2.17.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2020-01-28 9:07 UTC|newest] Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top 2020-01-28 9:06 [PATCH V2 0/9] mmc: mmci: sdmmc: add sdr104 support Ludovic Barre 2020-01-28 9:06 ` Ludovic Barre 2020-01-28 9:06 ` Ludovic Barre [this message] 2020-01-28 9:06 ` [PATCH V2 1/9] mmc: mmci: sdmmc: replace sg_dma_xxx macros Ludovic Barre 2020-01-28 9:06 ` [PATCH V2 2/9] mmc: mmci: sdmmc: rename sdmmc_priv struct to sdmmc_idma Ludovic Barre 2020-01-28 9:06 ` Ludovic Barre 2020-01-28 9:06 ` [PATCH V2 3/9] mmc: mmci: add a reference at mmc_host_ops in mmci struct Ludovic Barre 2020-01-28 9:06 ` Ludovic Barre 2020-01-28 9:06 ` [PATCH V2 4/9] mmc: mmci: add private pointer for variant Ludovic Barre 2020-01-28 9:06 ` Ludovic Barre 2020-01-28 9:06 ` [PATCH V2 5/9] dt-bindings: mmc: mmci: add delay block base register for sdmmc Ludovic Barre 2020-01-28 9:06 ` Ludovic Barre 2020-02-05 17:49 ` Rob Herring 2020-02-05 17:49 ` Rob Herring 2020-01-28 9:06 ` [PATCH V2 6/9] mmc: mmci: sdmmc: add execute tuning with delay block Ludovic Barre 2020-01-28 9:06 ` Ludovic Barre 2020-01-28 9:06 ` [PATCH V2 7/9] mmc: mmci: add volt_switch callbacks Ludovic Barre 2020-01-28 9:06 ` Ludovic Barre 2020-01-28 9:06 ` [PATCH V2 8/9] mmc: mmci: sdmmc: add voltage switch functions Ludovic Barre 2020-01-28 9:06 ` Ludovic Barre 2020-01-28 9:06 ` [PATCH V2 9/9] mmc: mmci: add sdmmc variant revision 2.0 Ludovic Barre 2020-01-28 9:06 ` Ludovic Barre 2020-02-11 14:44 ` Ludovic BARRE 2020-02-11 14:44 ` Ludovic BARRE 2020-02-19 10:28 ` Ulf Hansson 2020-02-19 10:28 ` Ulf Hansson 2020-02-11 14:47 ` [PATCH V2 0/9] mmc: mmci: sdmmc: add sdr104 support Ludovic BARRE 2020-02-11 14:47 ` Ludovic BARRE 2020-02-11 15:16 ` Ulf Hansson 2020-02-11 15:16 ` Ulf Hansson 2020-02-19 10:28 ` Ulf Hansson 2020-02-19 10:28 ` Ulf Hansson 2020-02-24 16:20 ` Ludovic BARRE 2020-02-24 16:20 ` Ludovic BARRE
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20200128090636.13689-2-ludovic.barre@st.com \ --to=ludovic.barre@st.com \ --cc=alexandre.torgue@st.com \ --cc=devicetree@vger.kernel.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-mmc@vger.kernel.org \ --cc=linux-stm32@st-md-mailman.stormreply.com \ --cc=mcoquelin.stm32@gmail.com \ --cc=robh+dt@kernel.org \ --cc=srinivas.kandagatla@linaro.org \ --cc=ulf.hansson@linaro.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.