From: Amelie Delaunay <amelie.delaunay@st.com> To: Vinod Koul <vkoul@kernel.org>, Dan Williams <dan.j.williams@intel.com>, Maxime Coquelin <mcoquelin.stm32@gmail.com>, Alexandre Torgue <alexandre.torgue@st.com> Cc: <dmaengine@vger.kernel.org>, <linux-stm32@st-md-mailman.stormreply.com>, <linux-arm-kernel@lists.infradead.org>, <linux-kernel@vger.kernel.org>, Amelie Delaunay <amelie.delaunay@st.com>, Pierre-Yves MORDRET <pierre-yves.mordret@st.com> Subject: [PATCH 2/8] dmaengine: stm32-dma: use reset controller only at probe time Date: Wed, 29 Jan 2020 16:36:22 +0100 [thread overview] Message-ID: <20200129153628.29329-3-amelie.delaunay@st.com> (raw) In-Reply-To: <20200129153628.29329-1-amelie.delaunay@st.com> From: Etienne Carriere <etienne.carriere@st.com> Remove reset controller reference from device instance since it is used only at probe time. Signed-off-by: Etienne Carriere <etienne.carriere@st.com> Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com> --- drivers/dma/stm32-dma.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/dma/stm32-dma.c b/drivers/dma/stm32-dma.c index 136deabd1aa3..e31414796ec4 100644 --- a/drivers/dma/stm32-dma.c +++ b/drivers/dma/stm32-dma.c @@ -207,7 +207,6 @@ struct stm32_dma_device { struct dma_device ddev; void __iomem *base; struct clk *clk; - struct reset_control *rst; bool mem2mem; struct stm32_dma_chan chan[STM32_DMA_MAX_CHANNELS]; }; @@ -1275,6 +1274,7 @@ static int stm32_dma_probe(struct platform_device *pdev) struct dma_device *dd; const struct of_device_id *match; struct resource *res; + struct reset_control *rst; int i, ret; match = of_match_device(stm32_dma_of_match, &pdev->dev); @@ -1309,11 +1309,11 @@ static int stm32_dma_probe(struct platform_device *pdev) dmadev->mem2mem = of_property_read_bool(pdev->dev.of_node, "st,mem2mem"); - dmadev->rst = devm_reset_control_get(&pdev->dev, NULL); - if (!IS_ERR(dmadev->rst)) { - reset_control_assert(dmadev->rst); + rst = devm_reset_control_get(&pdev->dev, NULL); + if (!IS_ERR(rst)) { + reset_control_assert(rst); udelay(2); - reset_control_deassert(dmadev->rst); + reset_control_deassert(rst); } dma_cap_set(DMA_SLAVE, dd->cap_mask); -- 2.17.1
WARNING: multiple messages have this Message-ID (diff)
From: Amelie Delaunay <amelie.delaunay@st.com> To: Vinod Koul <vkoul@kernel.org>, Dan Williams <dan.j.williams@intel.com>, Maxime Coquelin <mcoquelin.stm32@gmail.com>, Alexandre Torgue <alexandre.torgue@st.com> Cc: Amelie Delaunay <amelie.delaunay@st.com>, linux-kernel@vger.kernel.org, Pierre-Yves MORDRET <pierre-yves.mordret@st.com>, dmaengine@vger.kernel.org, linux-stm32@st-md-mailman.stormreply.com, linux-arm-kernel@lists.infradead.org Subject: [PATCH 2/8] dmaengine: stm32-dma: use reset controller only at probe time Date: Wed, 29 Jan 2020 16:36:22 +0100 [thread overview] Message-ID: <20200129153628.29329-3-amelie.delaunay@st.com> (raw) In-Reply-To: <20200129153628.29329-1-amelie.delaunay@st.com> From: Etienne Carriere <etienne.carriere@st.com> Remove reset controller reference from device instance since it is used only at probe time. Signed-off-by: Etienne Carriere <etienne.carriere@st.com> Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com> --- drivers/dma/stm32-dma.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/dma/stm32-dma.c b/drivers/dma/stm32-dma.c index 136deabd1aa3..e31414796ec4 100644 --- a/drivers/dma/stm32-dma.c +++ b/drivers/dma/stm32-dma.c @@ -207,7 +207,6 @@ struct stm32_dma_device { struct dma_device ddev; void __iomem *base; struct clk *clk; - struct reset_control *rst; bool mem2mem; struct stm32_dma_chan chan[STM32_DMA_MAX_CHANNELS]; }; @@ -1275,6 +1274,7 @@ static int stm32_dma_probe(struct platform_device *pdev) struct dma_device *dd; const struct of_device_id *match; struct resource *res; + struct reset_control *rst; int i, ret; match = of_match_device(stm32_dma_of_match, &pdev->dev); @@ -1309,11 +1309,11 @@ static int stm32_dma_probe(struct platform_device *pdev) dmadev->mem2mem = of_property_read_bool(pdev->dev.of_node, "st,mem2mem"); - dmadev->rst = devm_reset_control_get(&pdev->dev, NULL); - if (!IS_ERR(dmadev->rst)) { - reset_control_assert(dmadev->rst); + rst = devm_reset_control_get(&pdev->dev, NULL); + if (!IS_ERR(rst)) { + reset_control_assert(rst); udelay(2); - reset_control_deassert(dmadev->rst); + reset_control_deassert(rst); } dma_cap_set(DMA_SLAVE, dd->cap_mask); -- 2.17.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2020-01-29 15:37 UTC|newest] Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top 2020-01-29 15:36 [PATCH 0/8] STM32 DMA driver fixes and improvements Amelie Delaunay 2020-01-29 15:36 ` Amelie Delaunay 2020-01-29 15:36 ` [PATCH 1/8] dmaengine: stm32-dma: add suspend/resume power management support Amelie Delaunay 2020-01-29 15:36 ` Amelie Delaunay 2020-01-29 15:36 ` Amelie Delaunay [this message] 2020-01-29 15:36 ` [PATCH 2/8] dmaengine: stm32-dma: use reset controller only at probe time Amelie Delaunay 2020-01-29 15:36 ` [PATCH 3/8] dmaengine: stm32-dma: driver defers probe for reset Amelie Delaunay 2020-01-29 15:36 ` Amelie Delaunay 2020-01-29 15:36 ` [PATCH 4/8] dmaengine: stm32-dma: enable descriptor_reuse Amelie Delaunay 2020-01-29 15:36 ` Amelie Delaunay 2020-01-29 15:36 ` [PATCH 5/8] dmaengine: stm32-dma: use dma_set_max_seg_size to set the sg limit Amelie Delaunay 2020-01-29 15:36 ` Amelie Delaunay 2020-01-29 15:36 ` [PATCH 6/8] dmaengine: stm32-dma: add copy_align constraint Amelie Delaunay 2020-01-29 15:36 ` Amelie Delaunay 2020-01-29 15:36 ` [PATCH 7/8] dmaengine: stm32-dma: fix sleeping function called from invalid context Amelie Delaunay 2020-01-29 15:36 ` Amelie Delaunay 2020-01-29 15:36 ` [PATCH 8/8] dmaengine: stm32-dma: use vchan_terminate_vdesc() in .terminate_all Amelie Delaunay 2020-01-29 15:36 ` Amelie Delaunay 2020-02-25 5:45 ` [PATCH 0/8] STM32 DMA driver fixes and improvements Vinod Koul 2020-02-25 5:45 ` Vinod Koul
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20200129153628.29329-3-amelie.delaunay@st.com \ --to=amelie.delaunay@st.com \ --cc=alexandre.torgue@st.com \ --cc=dan.j.williams@intel.com \ --cc=dmaengine@vger.kernel.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-stm32@st-md-mailman.stormreply.com \ --cc=mcoquelin.stm32@gmail.com \ --cc=pierre-yves.mordret@st.com \ --cc=vkoul@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.