From: Amelie Delaunay <amelie.delaunay@st.com> To: Maxime Coquelin <mcoquelin.stm32@gmail.com>, Alexandre Torgue <alexandre.torgue@st.com>, Rob Herring <robh+dt@kernel.org>, Mark Rutland <mark.rutland@arm.com> Cc: <linux-stm32@st-md-mailman.stormreply.com>, <linux-arm-kernel@lists.infradead.org>, <devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>, Amelie Delaunay <amelie.delaunay@st.com> Subject: [PATCH 1/3] ARM: dts: stm32: add USB OTG full support on stm32mp151 Date: Tue, 4 Feb 2020 14:26:04 +0100 [thread overview] Message-ID: <20200204132606.20222-2-amelie.delaunay@st.com> (raw) In-Reply-To: <20200204132606.20222-1-amelie.delaunay@st.com> Using the st,stm32mp15-hsotg compatible allows to use USB OTG with Dual Role mode support. Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com> --- arch/arm/boot/dts/stm32mp151.dtsi | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/stm32mp151.dtsi b/arch/arm/boot/dts/stm32mp151.dtsi index fb41d0778b00..53fa6ed82b34 100644 --- a/arch/arm/boot/dts/stm32mp151.dtsi +++ b/arch/arm/boot/dts/stm32mp151.dtsi @@ -1044,7 +1044,7 @@ }; usbotg_hs: usb-otg@49000000 { - compatible = "snps,dwc2"; + compatible = "st,stm32mp15-hsotg", "snps,dwc2"; reg = <0x49000000 0x10000>; clocks = <&rcc USBO_K>; clock-names = "otg"; @@ -1055,6 +1055,7 @@ g-np-tx-fifo-size = <32>; g-tx-fifo-size = <128 128 64 64 64 64 32 32>; dr_mode = "otg"; + usb33d-supply = <&usb33>; status = "disabled"; }; -- 2.17.1
WARNING: multiple messages have this Message-ID (diff)
From: Amelie Delaunay <amelie.delaunay@st.com> To: Maxime Coquelin <mcoquelin.stm32@gmail.com>, Alexandre Torgue <alexandre.torgue@st.com>, Rob Herring <robh+dt@kernel.org>, Mark Rutland <mark.rutland@arm.com> Cc: devicetree@vger.kernel.org, Amelie Delaunay <amelie.delaunay@st.com>, linux-stm32@st-md-mailman.stormreply.com, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org Subject: [PATCH 1/3] ARM: dts: stm32: add USB OTG full support on stm32mp151 Date: Tue, 4 Feb 2020 14:26:04 +0100 [thread overview] Message-ID: <20200204132606.20222-2-amelie.delaunay@st.com> (raw) In-Reply-To: <20200204132606.20222-1-amelie.delaunay@st.com> Using the st,stm32mp15-hsotg compatible allows to use USB OTG with Dual Role mode support. Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com> --- arch/arm/boot/dts/stm32mp151.dtsi | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/stm32mp151.dtsi b/arch/arm/boot/dts/stm32mp151.dtsi index fb41d0778b00..53fa6ed82b34 100644 --- a/arch/arm/boot/dts/stm32mp151.dtsi +++ b/arch/arm/boot/dts/stm32mp151.dtsi @@ -1044,7 +1044,7 @@ }; usbotg_hs: usb-otg@49000000 { - compatible = "snps,dwc2"; + compatible = "st,stm32mp15-hsotg", "snps,dwc2"; reg = <0x49000000 0x10000>; clocks = <&rcc USBO_K>; clock-names = "otg"; @@ -1055,6 +1055,7 @@ g-np-tx-fifo-size = <32>; g-tx-fifo-size = <128 128 64 64 64 64 32 32>; dr_mode = "otg"; + usb33d-supply = <&usb33>; status = "disabled"; }; -- 2.17.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2020-02-04 13:26 UTC|newest] Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top 2020-02-04 13:26 [PATCH 0/3] USB OTG Dual Role on STM32MP15 Amelie Delaunay 2020-02-04 13:26 ` Amelie Delaunay 2020-02-04 13:26 ` Amelie Delaunay [this message] 2020-02-04 13:26 ` [PATCH 1/3] ARM: dts: stm32: add USB OTG full support on stm32mp151 Amelie Delaunay 2020-02-04 13:26 ` [PATCH 2/3] ARM: dts: stm32: add USB OTG pinctrl to stm32mp15 Amelie Delaunay 2020-02-04 13:26 ` Amelie Delaunay 2020-02-04 13:26 ` [PATCH 3/3] ARM: dts: stm32: enable USB OTG Dual Role on stm32mp157c-ev1 Amelie Delaunay 2020-02-04 13:26 ` Amelie Delaunay 2020-02-10 16:44 ` [PATCH 0/3] USB OTG Dual Role on STM32MP15 Alexandre Torgue 2020-02-10 16:44 ` Alexandre Torgue
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20200204132606.20222-2-amelie.delaunay@st.com \ --to=amelie.delaunay@st.com \ --cc=alexandre.torgue@st.com \ --cc=devicetree@vger.kernel.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-stm32@st-md-mailman.stormreply.com \ --cc=mark.rutland@arm.com \ --cc=mcoquelin.stm32@gmail.com \ --cc=robh+dt@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.