[alsa-devel] [PATCH 3/3] ASoC: SOF: Intel: hda: move i915 init earlier

[Kai Vehmanen <kai.vehmanen@linux.intel.com>]

To be compliant with i915 display driver requirements, i915 power-up
must be done before any HDA communication takes place, including
parsing the bus capabilities. Otherwise the initial codec probe
may fail.

Move i915 initialization earlier in the SOF HDA sequence. This
sequence is now aligned with the snd-hda-intel driver where the
display_power() call is before snd_hdac_bus_parse_capabilities()
and rest of the capability parsing.

Also remove unnecessary ifdef around hda_codec_i915_init(). There's
a dummy implementation provided if CONFIG_SND_SOC_SOF_HDA is not
enabled.

Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
---
 sound/soc/sof/intel/hda.c | 17 ++++++++---------
 1 file changed, 8 insertions(+), 9 deletions(-)

diff --git a/sound/soc/sof/intel/hda.c b/sound/soc/sof/intel/hda.c
index 8fddafb5c1d4..25946a1c2822 100644
--- a/sound/soc/sof/intel/hda.c
+++ b/sound/soc/sof/intel/hda.c
@@ -286,6 +286,13 @@ static int hda_init(struct snd_sof_dev *sdev)
 	/* HDA base */
 	sdev->bar[HDA_DSP_HDA_BAR] = bus->remap_addr;
 
+	/* init i915 and HDMI codecs */
+	ret = hda_codec_i915_init(sdev);
+	if (ret < 0) {
+		dev_err(sdev->dev, "error: init i915 and HDMI codec failed\n");
+		return ret;
+	}
+
 	/* get controller capabilities */
 	ret = hda_dsp_ctrl_get_caps(sdev);
 	if (ret < 0)
@@ -353,15 +360,6 @@ static int hda_init_caps(struct snd_sof_dev *sdev)
 	if (bus->ppcap)
 		dev_dbg(sdev->dev, "PP capability, will probe DSP later.\n");
 
-#if IS_ENABLED(CONFIG_SND_SOC_SOF_HDA)
-	/* init i915 and HDMI codecs */
-	ret = hda_codec_i915_init(sdev);
-	if (ret < 0) {
-		dev_err(sdev->dev, "error: init i915 and HDMI codec failed\n");
-		return ret;
-	}
-#endif
-
 	/* Init HDA controller after i915 init */
 	ret = hda_dsp_ctrl_init_chip(sdev, true);
 	if (ret < 0) {
@@ -611,6 +609,7 @@ int hda_dsp_probe(struct snd_sof_dev *sdev)
 	iounmap(sdev->bar[HDA_DSP_BAR]);
 hdac_bus_unmap:
 	iounmap(bus->remap_addr);
+	hda_codec_i915_exit(sdev);
 err:
 	return ret;
 }
-- 
2.17.1

_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel