[PATCH v3] dt-bindings: touchscreen: Convert edt-ft5x06 to json-schema

[Benjamin Gaignard <benjamin.gaignard@st.com>]

Convert the EDT-FT5x06 to DT schema using json-schema.

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Reviewed-by: Rob Herring <robh@kernel.org>
---
version 3:
- rebased on top of input tree
- add wakeup-source
 .../bindings/input/touchscreen/edt-ft5x06.txt      |  77 -------------
 .../bindings/input/touchscreen/edt-ft5x06.yaml     | 125 +++++++++++++++++++++
 2 files changed, 125 insertions(+), 77 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.txt
 create mode 100644 Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml

diff --git a/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.txt b/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.txt
deleted file mode 100644
index 0e57315e9cbd..000000000000
--- a/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.txt
+++ /dev/null
@@ -1,77 +0,0 @@
-FocalTech EDT-FT5x06 Polytouch driver
-=====================================
-
-There are 5 variants of the chip for various touch panel sizes
-FT5206GE1  2.8" .. 3.8"
-FT5306DE4  4.3" .. 7"
-FT5406EE8  7"   .. 8.9"
-FT5506EEG  7"   .. 8.9"
-FT5726NEI  5.7” .. 11.6"
-
-The software interface is identical for all those chips, so that
-currently there is no need for the driver to distinguish between the
-different chips. Nevertheless distinct compatible strings are used so
-that a distinction can be added if necessary without changing the DT
-bindings.
-
-
-Required properties:
- - compatible:  "edt,edt-ft5206"
-           or:  "edt,edt-ft5306"
-           or:  "edt,edt-ft5406"
-           or:  "edt,edt-ft5506"
-           or:  "evervision,ev-ft5726"
-           or:  "focaltech,ft6236"
-
- - reg:         I2C slave address of the chip (0x38)
- - interrupts:       interrupt specification for the touchdetect
-                     interrupt
-
-Optional properties:
- - reset-gpios: GPIO specification for the RESET input
- - wake-gpios:  GPIO specification for the WAKE input
- - vcc-supply:  Regulator that supplies the touchscreen
-
- - pinctrl-names: should be "default"
- - pinctrl-0:   a phandle pointing to the pin settings for the
-                control gpios
-
- - wakeup-source: If present the device will act as wakeup-source
-
- - threshold:   allows setting the "click"-threshold in the range
-                from 0 to 80.
-
- - gain:        allows setting the sensitivity in the range from 0 to
-                31. Note that lower values indicate higher
-                sensitivity.
-
- - offset:      allows setting the edge compensation in the range from
-                0 to 31.
-
- - offset-x:    Same as offset, but applies only to the horizontal position.
-                Range from 0 to 80, only supported by evervision,ev-ft5726
-                devices.
-
- - offset-y:    Same as offset, but applies only to the vertical position.
-                Range from 0 to 80, only supported by evervision,ev-ft5726
-                devices.
-
- - touchscreen-size-x	   : See touchscreen.txt
- - touchscreen-size-y	   : See touchscreen.txt
- - touchscreen-fuzz-x      : See touchscreen.txt
- - touchscreen-fuzz-y      : See touchscreen.txt
- - touchscreen-inverted-x  : See touchscreen.txt
- - touchscreen-inverted-y  : See touchscreen.txt
- - touchscreen-swapped-x-y : See touchscreen.txt
-
-Example:
-	polytouch: edt-ft5x06@38 {
-		compatible = "edt,edt-ft5406", "edt,edt-ft5x06";
-		reg = <0x38>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&edt_ft5x06_pins>;
-		interrupt-parent = <&gpio2>;
-		interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
-		reset-gpios = <&gpio2 6 GPIO_ACTIVE_LOW>;
-		wake-gpios = <&gpio4 9 GPIO_ACTIVE_HIGH>;
-	};
diff --git a/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml b/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml
new file mode 100644
index 000000000000..8d58709d4b47
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml
@@ -0,0 +1,125 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/edt-ft5x06.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: FocalTech EDT-FT5x06 Polytouch Bindings
+
+description: |
+             There are 5 variants of the chip for various touch panel sizes
+              FT5206GE1  2.8" .. 3.8"
+              FT5306DE4  4.3" .. 7"
+              FT5406EE8  7"   .. 8.9"
+              FT5506EEG  7"   .. 8.9"
+              FT5726NEI  5.7” .. 11.6"
+
+maintainers:
+  - Dmitry Torokhov <dmitry.torokhov@gmail.com>
+
+allOf:
+  - $ref: touchscreen.yaml#
+  - if:
+     properties:
+       compatible:
+         contains:
+           enum:
+             - evervision,ev-ft5726
+
+    then:
+      properties:
+        offset-x: true
+        offset-y: true
+
+properties:
+  compatible:
+    enum:
+      - edt,edt-ft5206
+      - edt,edt-ft5306
+      - edt,edt-ft5406
+      - edt,edt-ft5506
+      - evervision,ev-ft5726
+      - focaltech,ft6236
+
+  reg:
+    const: 0x38
+
+  interrupts:
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+
+  wake-gpios:
+    maxItems: 1
+
+  wakeup-source: true
+
+  vcc-supply:
+    maxItems: 1
+
+  gain:
+    description: Allows setting the sensitivity in the range from 0 to 31.
+                 Note that lower values indicate higher sensitivity.
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32
+      - minimum: 0
+      - maximum: 31
+
+  offset:
+    description: Allows setting the edge compensation in the range from 0 to 31.
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32
+      - minimum: 0
+      - maximum: 31
+
+  offset-x:
+    description: Same as offset, but applies only to the horizontal position.
+                 Range from 0 to 80, only supported by evervision,ev-ft5726 devices.
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32
+      - minimum: 0
+      - maximum: 80
+
+  offset-y:
+    description: Same as offset, but applies only to the vertical position.
+                 Range from 0 to 80, only supported by evervision,ev-ft5726 devices.
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32
+      - minimum: 0
+      - maximum: 80
+
+  touchscreen-size-x: true
+  touchscreen-size-y: true
+  touchscreen-fuzz-x: true
+  touchscreen-fuzz-y: true
+  touchscreen-inverted-x: true
+  touchscreen-inverted-y: true
+  touchscreen-swapped-x-y: true
+  interrupt-controller: true
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    i2c@00000000 {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      edt-ft5x06@38 {
+        compatible = "edt,edt-ft5406";
+        reg = <0x38>;
+        interrupt-parent = <&gpio2>;
+        interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
+        reset-gpios = <&gpio2 6 GPIO_ACTIVE_LOW>;
+        wake-gpios = <&gpio4 9 GPIO_ACTIVE_HIGH>;
+      };
+    };
+
+...
-- 
2.15.0