All of lore.kernel.org
 help / color / mirror / Atom feed
From: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
To: intel-gfx@lists.freedesktop.org
Cc: linux-fbdev@vger.kernel.org, dri-devel@lists.freedesktop.org
Subject: [PATCH v5 05/18] video/hdmi: Add Unpack only function for DRM infoframe
Date: Sun, 09 Feb 2020 03:53:32 +0000	[thread overview]
Message-ID: <20200209035345.357436-6-gwan-gyeong.mun@intel.com> (raw)
In-Reply-To: <20200209035345.357436-1-gwan-gyeong.mun@intel.com>

It adds an unpack only function for DRM infoframe for dynamic range and
mastering infoframe readout.
It unpacks the information data block contained in the binary buffer into
a structured frame of the HDMI Dynamic Range and Mastering (DRM)
information frame.

In contrast to hdmi_drm_infoframe_unpack() function, it does not verify
a checksum.

It can be used for unpacking a DP HDR Metadata Infoframe SDP case.
DP HDR Metadata Infoframe SDP uses the same Dynamic Range and Mastering
(DRM) information (CTA-861-G spec.) such as HDMI DRM infoframe.
But DP SDP header and payload structure are different from HDMI DRM
Infoframe. Therefore unpacking DRM infoframe for DP requires skipping of
a verifying checksum.

Signed-off-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
---
 drivers/video/hdmi.c | 58 +++++++++++++++++++++++++++++++-------------
 include/linux/hdmi.h |  2 ++
 2 files changed, 43 insertions(+), 17 deletions(-)

diff --git a/drivers/video/hdmi.c b/drivers/video/hdmi.c
index 9c82e2a0a411..9818836d82b7 100644
--- a/drivers/video/hdmi.c
+++ b/drivers/video/hdmi.c
@@ -1775,20 +1775,18 @@ hdmi_vendor_any_infoframe_unpack(union hdmi_vendor_any_infoframe *frame,
 }
 
 /**
- * hdmi_drm_infoframe_unpack() - unpack binary buffer to a HDMI DRM infoframe
+ * hdmi_drm_infoframe_unpack_only() - unpack binary buffer to a HDMI DRM infoframe
  * @frame: HDMI DRM infoframe
  * @buffer: source buffer
  * @size: size of buffer
  *
- * Unpacks the information contained in binary @buffer into a structured
+ * Unpacks the information data block contained in binary @buffer into a structured
  * @frame of the HDMI Dynamic Range and Mastering (DRM) information frame.
- * Also verifies the checksum as required by section 5.3.5 of the HDMI 1.4
- * specification.
  *
  * Returns 0 on success or a negative error code on failure.
  */
-static int hdmi_drm_infoframe_unpack(struct hdmi_drm_infoframe *frame,
-				     const void *buffer, size_t size)
+int hdmi_drm_infoframe_unpack_only(struct hdmi_drm_infoframe *frame,
+				   const void *buffer, size_t size)
 {
 	const u8 *ptr = buffer;
 	const u8 *temp;
@@ -1797,23 +1795,13 @@ static int hdmi_drm_infoframe_unpack(struct hdmi_drm_infoframe *frame,
 	int ret;
 	int i;
 
-	if (size < HDMI_INFOFRAME_SIZE(DRM))
-		return -EINVAL;
-
-	if (ptr[0] != HDMI_INFOFRAME_TYPE_DRM ||
-	    ptr[1] != 1 ||
-	    ptr[2] != HDMI_DRM_INFOFRAME_SIZE)
-		return -EINVAL;
-
-	if (hdmi_infoframe_checksum(buffer, HDMI_INFOFRAME_SIZE(DRM)) != 0)
+	if (size < HDMI_DRM_INFOFRAME_SIZE)
 		return -EINVAL;
 
 	ret = hdmi_drm_infoframe_init(frame);
 	if (ret)
 		return ret;
 
-	ptr += HDMI_INFOFRAME_HEADER_SIZE;
-
 	frame->eotf = ptr[0] & 0x7;
 	frame->metadata_type = ptr[1] & 0x7;
 
@@ -1837,6 +1825,42 @@ static int hdmi_drm_infoframe_unpack(struct hdmi_drm_infoframe *frame,
 
 	return 0;
 }
+EXPORT_SYMBOL(hdmi_drm_infoframe_unpack_only);
+
+/**
+ * hdmi_drm_infoframe_unpack() - unpack binary buffer to a HDMI DRM infoframe
+ * @frame: HDMI DRM infoframe
+ * @buffer: source buffer
+ * @size: size of buffer
+ *
+ * Unpacks the information contained in binary @buffer into a structured
+ * @frame of the HDMI Dynamic Range and Mastering (DRM) information frame.
+ * Also verifies the checksum as required by section 5.3.5 of the HDMI 1.4
+ * specification.
+ *
+ * Returns 0 on success or a negative error code on failure.
+ */
+static int hdmi_drm_infoframe_unpack(struct hdmi_drm_infoframe *frame,
+				     const void *buffer, size_t size)
+{
+	const u8 *ptr = buffer;
+	int ret;
+
+	if (size < HDMI_INFOFRAME_SIZE(DRM))
+		return -EINVAL;
+
+	if (ptr[0] != HDMI_INFOFRAME_TYPE_DRM ||
+	    ptr[1] != 1 ||
+	    ptr[2] != HDMI_DRM_INFOFRAME_SIZE)
+		return -EINVAL;
+
+	if (hdmi_infoframe_checksum(buffer, HDMI_INFOFRAME_SIZE(DRM)) != 0)
+		return -EINVAL;
+
+	ret = hdmi_drm_infoframe_unpack_only(frame, ptr + HDMI_INFOFRAME_HEADER_SIZE,
+					     size - HDMI_INFOFRAME_HEADER_SIZE);
+	return ret;
+}
 
 /**
  * hdmi_infoframe_unpack() - unpack binary buffer to a HDMI infoframe
diff --git a/include/linux/hdmi.h b/include/linux/hdmi.h
index 9918a6c910c5..afb43efc03e0 100644
--- a/include/linux/hdmi.h
+++ b/include/linux/hdmi.h
@@ -219,6 +219,8 @@ ssize_t hdmi_drm_infoframe_pack(struct hdmi_drm_infoframe *frame, void *buffer,
 ssize_t hdmi_drm_infoframe_pack_only(const struct hdmi_drm_infoframe *frame,
 				     void *buffer, size_t size);
 int hdmi_drm_infoframe_check(struct hdmi_drm_infoframe *frame);
+int hdmi_drm_infoframe_unpack_only(struct hdmi_drm_infoframe *frame,
+				   const void *buffer, size_t size);
 
 enum hdmi_spd_sdi {
 	HDMI_SPD_SDI_UNKNOWN,
-- 
2.24.1

WARNING: multiple messages have this Message-ID (diff)
From: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
To: intel-gfx@lists.freedesktop.org
Cc: linux-fbdev@vger.kernel.org, dri-devel@lists.freedesktop.org
Subject: [PATCH v5 05/18] video/hdmi: Add Unpack only function for DRM infoframe
Date: Sun,  9 Feb 2020 05:53:32 +0200	[thread overview]
Message-ID: <20200209035345.357436-6-gwan-gyeong.mun@intel.com> (raw)
In-Reply-To: <20200209035345.357436-1-gwan-gyeong.mun@intel.com>

It adds an unpack only function for DRM infoframe for dynamic range and
mastering infoframe readout.
It unpacks the information data block contained in the binary buffer into
a structured frame of the HDMI Dynamic Range and Mastering (DRM)
information frame.

In contrast to hdmi_drm_infoframe_unpack() function, it does not verify
a checksum.

It can be used for unpacking a DP HDR Metadata Infoframe SDP case.
DP HDR Metadata Infoframe SDP uses the same Dynamic Range and Mastering
(DRM) information (CTA-861-G spec.) such as HDMI DRM infoframe.
But DP SDP header and payload structure are different from HDMI DRM
Infoframe. Therefore unpacking DRM infoframe for DP requires skipping of
a verifying checksum.

Signed-off-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
---
 drivers/video/hdmi.c | 58 +++++++++++++++++++++++++++++++-------------
 include/linux/hdmi.h |  2 ++
 2 files changed, 43 insertions(+), 17 deletions(-)

diff --git a/drivers/video/hdmi.c b/drivers/video/hdmi.c
index 9c82e2a0a411..9818836d82b7 100644
--- a/drivers/video/hdmi.c
+++ b/drivers/video/hdmi.c
@@ -1775,20 +1775,18 @@ hdmi_vendor_any_infoframe_unpack(union hdmi_vendor_any_infoframe *frame,
 }
 
 /**
- * hdmi_drm_infoframe_unpack() - unpack binary buffer to a HDMI DRM infoframe
+ * hdmi_drm_infoframe_unpack_only() - unpack binary buffer to a HDMI DRM infoframe
  * @frame: HDMI DRM infoframe
  * @buffer: source buffer
  * @size: size of buffer
  *
- * Unpacks the information contained in binary @buffer into a structured
+ * Unpacks the information data block contained in binary @buffer into a structured
  * @frame of the HDMI Dynamic Range and Mastering (DRM) information frame.
- * Also verifies the checksum as required by section 5.3.5 of the HDMI 1.4
- * specification.
  *
  * Returns 0 on success or a negative error code on failure.
  */
-static int hdmi_drm_infoframe_unpack(struct hdmi_drm_infoframe *frame,
-				     const void *buffer, size_t size)
+int hdmi_drm_infoframe_unpack_only(struct hdmi_drm_infoframe *frame,
+				   const void *buffer, size_t size)
 {
 	const u8 *ptr = buffer;
 	const u8 *temp;
@@ -1797,23 +1795,13 @@ static int hdmi_drm_infoframe_unpack(struct hdmi_drm_infoframe *frame,
 	int ret;
 	int i;
 
-	if (size < HDMI_INFOFRAME_SIZE(DRM))
-		return -EINVAL;
-
-	if (ptr[0] != HDMI_INFOFRAME_TYPE_DRM ||
-	    ptr[1] != 1 ||
-	    ptr[2] != HDMI_DRM_INFOFRAME_SIZE)
-		return -EINVAL;
-
-	if (hdmi_infoframe_checksum(buffer, HDMI_INFOFRAME_SIZE(DRM)) != 0)
+	if (size < HDMI_DRM_INFOFRAME_SIZE)
 		return -EINVAL;
 
 	ret = hdmi_drm_infoframe_init(frame);
 	if (ret)
 		return ret;
 
-	ptr += HDMI_INFOFRAME_HEADER_SIZE;
-
 	frame->eotf = ptr[0] & 0x7;
 	frame->metadata_type = ptr[1] & 0x7;
 
@@ -1837,6 +1825,42 @@ static int hdmi_drm_infoframe_unpack(struct hdmi_drm_infoframe *frame,
 
 	return 0;
 }
+EXPORT_SYMBOL(hdmi_drm_infoframe_unpack_only);
+
+/**
+ * hdmi_drm_infoframe_unpack() - unpack binary buffer to a HDMI DRM infoframe
+ * @frame: HDMI DRM infoframe
+ * @buffer: source buffer
+ * @size: size of buffer
+ *
+ * Unpacks the information contained in binary @buffer into a structured
+ * @frame of the HDMI Dynamic Range and Mastering (DRM) information frame.
+ * Also verifies the checksum as required by section 5.3.5 of the HDMI 1.4
+ * specification.
+ *
+ * Returns 0 on success or a negative error code on failure.
+ */
+static int hdmi_drm_infoframe_unpack(struct hdmi_drm_infoframe *frame,
+				     const void *buffer, size_t size)
+{
+	const u8 *ptr = buffer;
+	int ret;
+
+	if (size < HDMI_INFOFRAME_SIZE(DRM))
+		return -EINVAL;
+
+	if (ptr[0] != HDMI_INFOFRAME_TYPE_DRM ||
+	    ptr[1] != 1 ||
+	    ptr[2] != HDMI_DRM_INFOFRAME_SIZE)
+		return -EINVAL;
+
+	if (hdmi_infoframe_checksum(buffer, HDMI_INFOFRAME_SIZE(DRM)) != 0)
+		return -EINVAL;
+
+	ret = hdmi_drm_infoframe_unpack_only(frame, ptr + HDMI_INFOFRAME_HEADER_SIZE,
+					     size - HDMI_INFOFRAME_HEADER_SIZE);
+	return ret;
+}
 
 /**
  * hdmi_infoframe_unpack() - unpack binary buffer to a HDMI infoframe
diff --git a/include/linux/hdmi.h b/include/linux/hdmi.h
index 9918a6c910c5..afb43efc03e0 100644
--- a/include/linux/hdmi.h
+++ b/include/linux/hdmi.h
@@ -219,6 +219,8 @@ ssize_t hdmi_drm_infoframe_pack(struct hdmi_drm_infoframe *frame, void *buffer,
 ssize_t hdmi_drm_infoframe_pack_only(const struct hdmi_drm_infoframe *frame,
 				     void *buffer, size_t size);
 int hdmi_drm_infoframe_check(struct hdmi_drm_infoframe *frame);
+int hdmi_drm_infoframe_unpack_only(struct hdmi_drm_infoframe *frame,
+				   const void *buffer, size_t size);
 
 enum hdmi_spd_sdi {
 	HDMI_SPD_SDI_UNKNOWN,
-- 
2.24.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

WARNING: multiple messages have this Message-ID (diff)
From: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
To: intel-gfx@lists.freedesktop.org
Cc: linux-fbdev@vger.kernel.org, dri-devel@lists.freedesktop.org
Subject: [Intel-gfx] [PATCH v5 05/18] video/hdmi: Add Unpack only function for DRM infoframe
Date: Sun,  9 Feb 2020 05:53:32 +0200	[thread overview]
Message-ID: <20200209035345.357436-6-gwan-gyeong.mun@intel.com> (raw)
In-Reply-To: <20200209035345.357436-1-gwan-gyeong.mun@intel.com>

It adds an unpack only function for DRM infoframe for dynamic range and
mastering infoframe readout.
It unpacks the information data block contained in the binary buffer into
a structured frame of the HDMI Dynamic Range and Mastering (DRM)
information frame.

In contrast to hdmi_drm_infoframe_unpack() function, it does not verify
a checksum.

It can be used for unpacking a DP HDR Metadata Infoframe SDP case.
DP HDR Metadata Infoframe SDP uses the same Dynamic Range and Mastering
(DRM) information (CTA-861-G spec.) such as HDMI DRM infoframe.
But DP SDP header and payload structure are different from HDMI DRM
Infoframe. Therefore unpacking DRM infoframe for DP requires skipping of
a verifying checksum.

Signed-off-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
---
 drivers/video/hdmi.c | 58 +++++++++++++++++++++++++++++++-------------
 include/linux/hdmi.h |  2 ++
 2 files changed, 43 insertions(+), 17 deletions(-)

diff --git a/drivers/video/hdmi.c b/drivers/video/hdmi.c
index 9c82e2a0a411..9818836d82b7 100644
--- a/drivers/video/hdmi.c
+++ b/drivers/video/hdmi.c
@@ -1775,20 +1775,18 @@ hdmi_vendor_any_infoframe_unpack(union hdmi_vendor_any_infoframe *frame,
 }
 
 /**
- * hdmi_drm_infoframe_unpack() - unpack binary buffer to a HDMI DRM infoframe
+ * hdmi_drm_infoframe_unpack_only() - unpack binary buffer to a HDMI DRM infoframe
  * @frame: HDMI DRM infoframe
  * @buffer: source buffer
  * @size: size of buffer
  *
- * Unpacks the information contained in binary @buffer into a structured
+ * Unpacks the information data block contained in binary @buffer into a structured
  * @frame of the HDMI Dynamic Range and Mastering (DRM) information frame.
- * Also verifies the checksum as required by section 5.3.5 of the HDMI 1.4
- * specification.
  *
  * Returns 0 on success or a negative error code on failure.
  */
-static int hdmi_drm_infoframe_unpack(struct hdmi_drm_infoframe *frame,
-				     const void *buffer, size_t size)
+int hdmi_drm_infoframe_unpack_only(struct hdmi_drm_infoframe *frame,
+				   const void *buffer, size_t size)
 {
 	const u8 *ptr = buffer;
 	const u8 *temp;
@@ -1797,23 +1795,13 @@ static int hdmi_drm_infoframe_unpack(struct hdmi_drm_infoframe *frame,
 	int ret;
 	int i;
 
-	if (size < HDMI_INFOFRAME_SIZE(DRM))
-		return -EINVAL;
-
-	if (ptr[0] != HDMI_INFOFRAME_TYPE_DRM ||
-	    ptr[1] != 1 ||
-	    ptr[2] != HDMI_DRM_INFOFRAME_SIZE)
-		return -EINVAL;
-
-	if (hdmi_infoframe_checksum(buffer, HDMI_INFOFRAME_SIZE(DRM)) != 0)
+	if (size < HDMI_DRM_INFOFRAME_SIZE)
 		return -EINVAL;
 
 	ret = hdmi_drm_infoframe_init(frame);
 	if (ret)
 		return ret;
 
-	ptr += HDMI_INFOFRAME_HEADER_SIZE;
-
 	frame->eotf = ptr[0] & 0x7;
 	frame->metadata_type = ptr[1] & 0x7;
 
@@ -1837,6 +1825,42 @@ static int hdmi_drm_infoframe_unpack(struct hdmi_drm_infoframe *frame,
 
 	return 0;
 }
+EXPORT_SYMBOL(hdmi_drm_infoframe_unpack_only);
+
+/**
+ * hdmi_drm_infoframe_unpack() - unpack binary buffer to a HDMI DRM infoframe
+ * @frame: HDMI DRM infoframe
+ * @buffer: source buffer
+ * @size: size of buffer
+ *
+ * Unpacks the information contained in binary @buffer into a structured
+ * @frame of the HDMI Dynamic Range and Mastering (DRM) information frame.
+ * Also verifies the checksum as required by section 5.3.5 of the HDMI 1.4
+ * specification.
+ *
+ * Returns 0 on success or a negative error code on failure.
+ */
+static int hdmi_drm_infoframe_unpack(struct hdmi_drm_infoframe *frame,
+				     const void *buffer, size_t size)
+{
+	const u8 *ptr = buffer;
+	int ret;
+
+	if (size < HDMI_INFOFRAME_SIZE(DRM))
+		return -EINVAL;
+
+	if (ptr[0] != HDMI_INFOFRAME_TYPE_DRM ||
+	    ptr[1] != 1 ||
+	    ptr[2] != HDMI_DRM_INFOFRAME_SIZE)
+		return -EINVAL;
+
+	if (hdmi_infoframe_checksum(buffer, HDMI_INFOFRAME_SIZE(DRM)) != 0)
+		return -EINVAL;
+
+	ret = hdmi_drm_infoframe_unpack_only(frame, ptr + HDMI_INFOFRAME_HEADER_SIZE,
+					     size - HDMI_INFOFRAME_HEADER_SIZE);
+	return ret;
+}
 
 /**
  * hdmi_infoframe_unpack() - unpack binary buffer to a HDMI infoframe
diff --git a/include/linux/hdmi.h b/include/linux/hdmi.h
index 9918a6c910c5..afb43efc03e0 100644
--- a/include/linux/hdmi.h
+++ b/include/linux/hdmi.h
@@ -219,6 +219,8 @@ ssize_t hdmi_drm_infoframe_pack(struct hdmi_drm_infoframe *frame, void *buffer,
 ssize_t hdmi_drm_infoframe_pack_only(const struct hdmi_drm_infoframe *frame,
 				     void *buffer, size_t size);
 int hdmi_drm_infoframe_check(struct hdmi_drm_infoframe *frame);
+int hdmi_drm_infoframe_unpack_only(struct hdmi_drm_infoframe *frame,
+				   const void *buffer, size_t size);
 
 enum hdmi_spd_sdi {
 	HDMI_SPD_SDI_UNKNOWN,
-- 
2.24.1

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

  parent reply	other threads:[~2020-02-09  3:53 UTC|newest]

Thread overview: 59+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-02-09  3:53 [PATCH v5 00/18] In order to readout DP SDPs, refactors the handling of DP SDPs Gwan-gyeong Mun
2020-02-09  3:53 ` [Intel-gfx] " Gwan-gyeong Mun
2020-02-09  3:53 ` Gwan-gyeong Mun
2020-02-09  3:53 ` [PATCH v5 01/18] drm: Add DP1.4 VSC SDP Payload related Data Structures Gwan-gyeong Mun
2020-02-09  3:53   ` [Intel-gfx] " Gwan-gyeong Mun
2020-02-09  3:53   ` Gwan-gyeong Mun
2020-02-09  3:53 ` [PATCH v5 02/18] drm/i915/dp: Add compute routine for DP VSC SDP Gwan-gyeong Mun
2020-02-09  3:53   ` [Intel-gfx] " Gwan-gyeong Mun
2020-02-09  3:53   ` Gwan-gyeong Mun
2020-02-09  3:53 ` [PATCH v5 03/18] drm/i915/dp: Add compute routine for DP HDR Metadata Infoframe SDP Gwan-gyeong Mun
2020-02-09  3:53   ` [Intel-gfx] " Gwan-gyeong Mun
2020-02-09  3:53   ` Gwan-gyeong Mun
2020-02-09  3:53 ` [PATCH v5 04/18] drm/i915/dp: Add writing of DP SDPs Gwan-gyeong Mun
2020-02-09  3:53   ` [Intel-gfx] " Gwan-gyeong Mun
2020-02-09  3:53   ` Gwan-gyeong Mun
2020-02-09  3:53 ` Gwan-gyeong Mun [this message]
2020-02-09  3:53   ` [Intel-gfx] [PATCH v5 05/18] video/hdmi: Add Unpack only function for DRM infoframe Gwan-gyeong Mun
2020-02-09  3:53   ` Gwan-gyeong Mun
2020-02-09  3:53 ` [PATCH v5 06/18] drm/i915/dp: Read out DP SDPs Gwan-gyeong Mun
2020-02-09  3:53   ` [Intel-gfx] " Gwan-gyeong Mun
2020-02-09  3:53   ` Gwan-gyeong Mun
2020-02-09  3:53 ` [PATCH v5 07/18] drm: Add logging function for DP VSC SDP Gwan-gyeong Mun
2020-02-09  3:53   ` [Intel-gfx] " Gwan-gyeong Mun
2020-02-09  3:53   ` Gwan-gyeong Mun
2020-02-09  3:53 ` [PATCH v5 08/18] drm/i915: Include HDMI DRM infoframe in the crtc state dump Gwan-gyeong Mun
2020-02-09  3:53   ` [Intel-gfx] " Gwan-gyeong Mun
2020-02-09  3:53   ` Gwan-gyeong Mun
2020-02-09  3:53 ` [PATCH v5 09/18] drm/i915: Include DP HDR Metadata Infoframe SDP " Gwan-gyeong Mun
2020-02-09  3:53   ` [Intel-gfx] " Gwan-gyeong Mun
2020-02-09  3:53   ` Gwan-gyeong Mun
2020-02-09  3:53 ` [PATCH v5 10/18] drm/i915: Include DP VSC " Gwan-gyeong Mun
2020-02-09  3:53   ` [Intel-gfx] " Gwan-gyeong Mun
2020-02-09  3:53   ` Gwan-gyeong Mun
2020-02-09  3:53 ` [PATCH v5 11/18] drm/i915: Program DP SDPs with computed configs Gwan-gyeong Mun
2020-02-09  3:53   ` [Intel-gfx] " Gwan-gyeong Mun
2020-02-09  3:53   ` Gwan-gyeong Mun
2020-02-09  3:53 ` [PATCH v5 12/18] drm/i915: Add state readout for DP HDR Metadata Infoframe SDP Gwan-gyeong Mun
2020-02-09  3:53   ` [Intel-gfx] " Gwan-gyeong Mun
2020-02-09  3:53   ` Gwan-gyeong Mun
2020-02-09  3:53 ` [PATCH v5 13/18] drm/i915: Add state readout for DP VSC SDP Gwan-gyeong Mun
2020-02-09  3:53   ` [Intel-gfx] " Gwan-gyeong Mun
2020-02-09  3:53   ` Gwan-gyeong Mun
2020-02-09  3:53 ` [PATCH v5 14/18] drm/i915: Disable DIPs when LSPCON is used Gwan-gyeong Mun
2020-02-09  3:53   ` [Intel-gfx] " Gwan-gyeong Mun
2020-02-09  3:53   ` Gwan-gyeong Mun
2020-02-09  3:53 ` [PATCH v5 15/18] drm/i915: Program DP SDPs on pipe updates Gwan-gyeong Mun
2020-02-09  3:53   ` [Intel-gfx] " Gwan-gyeong Mun
2020-02-09  3:53   ` Gwan-gyeong Mun
2020-02-09  3:53 ` [PATCH v5 16/18] drm/i915: Stop sending DP SDPs on ddi disable Gwan-gyeong Mun
2020-02-09  3:53   ` [Intel-gfx] " Gwan-gyeong Mun
2020-02-09  3:53   ` Gwan-gyeong Mun
2020-02-09  3:53 ` [PATCH v5 17/18] drm/i915/dp: Add compute routine for DP PSR VSC SDP Gwan-gyeong Mun
2020-02-09  3:53   ` [Intel-gfx] " Gwan-gyeong Mun
2020-02-09  3:53   ` Gwan-gyeong Mun
2020-02-09  3:53 ` [PATCH v5 18/18] drm/i915/psr: Use new DP VSC SDP compute routine on PSR Gwan-gyeong Mun
2020-02-09  3:53   ` [Intel-gfx] " Gwan-gyeong Mun
2020-02-09  3:53   ` Gwan-gyeong Mun
2020-02-09  4:15 ` [Intel-gfx] ✗ Fi.CI.CHECKPATCH: warning for In order to readout DP SDPs, refactors the handling of DP SDPs (rev5) Patchwork
2020-02-09  4:41 ` [Intel-gfx] ✗ Fi.CI.BAT: failure " Patchwork

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200209035345.357436-6-gwan-gyeong.mun@intel.com \
    --to=gwan-gyeong.mun@intel.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=linux-fbdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.