From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-usb@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Christoph Jung <jung@codemercs.com>
Subject: [PATCH 1/2] USB: misc: iowarrior: add support for 2 OEMed devices
Date: Tue, 11 Feb 2020 20:04:21 -0800 [thread overview]
Message-ID: <20200212040422.2991-1-gregkh@linuxfoundation.org> (raw)
Add support for two OEM devices that are identical to existing
IO-Warrior devices, except for the USB device id.
Cc: Christoph Jung <jung@codemercs.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/misc/iowarrior.c | 15 +++++++++++++--
1 file changed, 13 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/misc/iowarrior.c b/drivers/usb/misc/iowarrior.c
index dce44fbf031f..990acbe14852 100644
--- a/drivers/usb/misc/iowarrior.c
+++ b/drivers/usb/misc/iowarrior.c
@@ -34,6 +34,10 @@
/* full speed iowarrior */
#define USB_DEVICE_ID_CODEMERCS_IOW56 0x1503
+/* OEMed devices */
+#define USB_DEVICE_ID_CODEMERCS_IOW24SAG 0x158a
+#define USB_DEVICE_ID_CODEMERCS_IOW56AM 0x158b
+
/* Get a minor range for your devices from the usb maintainer */
#ifdef CONFIG_USB_DYNAMIC_MINORS
#define IOWARRIOR_MINOR_BASE 0
@@ -133,6 +137,8 @@ static const struct usb_device_id iowarrior_ids[] = {
{USB_DEVICE(USB_VENDOR_ID_CODEMERCS, USB_DEVICE_ID_CODEMERCS_IOWPV1)},
{USB_DEVICE(USB_VENDOR_ID_CODEMERCS, USB_DEVICE_ID_CODEMERCS_IOWPV2)},
{USB_DEVICE(USB_VENDOR_ID_CODEMERCS, USB_DEVICE_ID_CODEMERCS_IOW56)},
+ {USB_DEVICE(USB_VENDOR_ID_CODEMERCS, USB_DEVICE_ID_CODEMERCS_IOW24SAG)},
+ {USB_DEVICE(USB_VENDOR_ID_CODEMERCS, USB_DEVICE_ID_CODEMERCS_IOW56AM)},
{} /* Terminating entry */
};
MODULE_DEVICE_TABLE(usb, iowarrior_ids);
@@ -357,6 +363,7 @@ static ssize_t iowarrior_write(struct file *file,
}
switch (dev->product_id) {
case USB_DEVICE_ID_CODEMERCS_IOW24:
+ case USB_DEVICE_ID_CODEMERCS_IOW24SAG:
case USB_DEVICE_ID_CODEMERCS_IOWPV1:
case USB_DEVICE_ID_CODEMERCS_IOWPV2:
case USB_DEVICE_ID_CODEMERCS_IOW40:
@@ -371,6 +378,7 @@ static ssize_t iowarrior_write(struct file *file,
goto exit;
break;
case USB_DEVICE_ID_CODEMERCS_IOW56:
+ case USB_DEVICE_ID_CODEMERCS_IOW56AM:
/* The IOW56 uses asynchronous IO and more urbs */
if (atomic_read(&dev->write_busy) == MAX_WRITES_IN_FLIGHT) {
/* Wait until we are below the limit for submitted urbs */
@@ -493,6 +501,7 @@ static long iowarrior_ioctl(struct file *file, unsigned int cmd,
switch (cmd) {
case IOW_WRITE:
if (dev->product_id == USB_DEVICE_ID_CODEMERCS_IOW24 ||
+ dev->product_id == USB_DEVICE_ID_CODEMERCS_IOW24SAG ||
dev->product_id == USB_DEVICE_ID_CODEMERCS_IOWPV1 ||
dev->product_id == USB_DEVICE_ID_CODEMERCS_IOWPV2 ||
dev->product_id == USB_DEVICE_ID_CODEMERCS_IOW40) {
@@ -767,7 +776,8 @@ static int iowarrior_probe(struct usb_interface *interface,
goto error;
}
- if (dev->product_id == USB_DEVICE_ID_CODEMERCS_IOW56) {
+ if ((dev->product_id == USB_DEVICE_ID_CODEMERCS_IOW56) ||
+ (dev->product_id == USB_DEVICE_ID_CODEMERCS_IOW56AM)) {
res = usb_find_last_int_out_endpoint(iface_desc,
&dev->int_out_endpoint);
if (res) {
@@ -780,7 +790,8 @@ static int iowarrior_probe(struct usb_interface *interface,
/* we have to check the report_size often, so remember it in the endianness suitable for our machine */
dev->report_size = usb_endpoint_maxp(dev->int_in_endpoint);
if ((dev->interface->cur_altsetting->desc.bInterfaceNumber == 0) &&
- (dev->product_id == USB_DEVICE_ID_CODEMERCS_IOW56))
+ ((dev->product_id == USB_DEVICE_ID_CODEMERCS_IOW56) ||
+ (dev->product_id == USB_DEVICE_ID_CODEMERCS_IOW56AM)))
/* IOWarrior56 has wMaxPacketSize different from report size */
dev->report_size = 7;
base-commit: bb6d3fb354c5ee8d6bde2d576eb7220ea09862b9
--
2.25.0
next reply other threads:[~2020-02-12 4:04 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-02-12 4:04 Greg Kroah-Hartman [this message]
2020-02-12 4:04 ` [PATCH 2/2] USB: misc: iowarrior: add support for the 28 and 28L devices Greg Kroah-Hartman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200212040422.2991-1-gregkh@linuxfoundation.org \
--to=gregkh@linuxfoundation.org \
--cc=jung@codemercs.com \
--cc=linux-usb@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.