All of lore.kernel.org
 help / color / mirror / Atom feed
From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-usb@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Christoph Jung <jung@codemercs.com>
Subject: [PATCH 2/2] USB: misc: iowarrior: add support for the 28 and 28L devices
Date: Tue, 11 Feb 2020 20:04:22 -0800	[thread overview]
Message-ID: <20200212040422.2991-2-gregkh@linuxfoundation.org> (raw)
In-Reply-To: <20200212040422.2991-1-gregkh@linuxfoundation.org>

Add new device ids for the 28 and 28L devices.  These have 4 interfaces
instead of 2, but the driver binds the same, so the driver changes are
minimal.

Cc: Christoph Jung <jung@codemercs.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/misc/iowarrior.c | 15 +++++++++++++--
 1 file changed, 13 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/misc/iowarrior.c b/drivers/usb/misc/iowarrior.c
index 990acbe14852..d20b60acfe8a 100644
--- a/drivers/usb/misc/iowarrior.c
+++ b/drivers/usb/misc/iowarrior.c
@@ -33,6 +33,9 @@
 #define USB_DEVICE_ID_CODEMERCS_IOWPV2	0x1512
 /* full speed iowarrior */
 #define USB_DEVICE_ID_CODEMERCS_IOW56	0x1503
+/* fuller speed iowarrior */
+#define USB_DEVICE_ID_CODEMERCS_IOW28	0x1504
+#define USB_DEVICE_ID_CODEMERCS_IOW28L	0x1505
 
 /* OEMed devices */
 #define USB_DEVICE_ID_CODEMERCS_IOW24SAG	0x158a
@@ -139,6 +142,8 @@ static const struct usb_device_id iowarrior_ids[] = {
 	{USB_DEVICE(USB_VENDOR_ID_CODEMERCS, USB_DEVICE_ID_CODEMERCS_IOW56)},
 	{USB_DEVICE(USB_VENDOR_ID_CODEMERCS, USB_DEVICE_ID_CODEMERCS_IOW24SAG)},
 	{USB_DEVICE(USB_VENDOR_ID_CODEMERCS, USB_DEVICE_ID_CODEMERCS_IOW56AM)},
+	{USB_DEVICE(USB_VENDOR_ID_CODEMERCS, USB_DEVICE_ID_CODEMERCS_IOW28)},
+	{USB_DEVICE(USB_VENDOR_ID_CODEMERCS, USB_DEVICE_ID_CODEMERCS_IOW28L)},
 	{}			/* Terminating entry */
 };
 MODULE_DEVICE_TABLE(usb, iowarrior_ids);
@@ -379,6 +384,8 @@ static ssize_t iowarrior_write(struct file *file,
 		break;
 	case USB_DEVICE_ID_CODEMERCS_IOW56:
 	case USB_DEVICE_ID_CODEMERCS_IOW56AM:
+	case USB_DEVICE_ID_CODEMERCS_IOW28:
+	case USB_DEVICE_ID_CODEMERCS_IOW28L:
 		/* The IOW56 uses asynchronous IO and more urbs */
 		if (atomic_read(&dev->write_busy) == MAX_WRITES_IN_FLIGHT) {
 			/* Wait until we are below the limit for submitted urbs */
@@ -777,7 +784,9 @@ static int iowarrior_probe(struct usb_interface *interface,
 	}
 
 	if ((dev->product_id == USB_DEVICE_ID_CODEMERCS_IOW56) ||
-	    (dev->product_id == USB_DEVICE_ID_CODEMERCS_IOW56AM)) {
+	    (dev->product_id == USB_DEVICE_ID_CODEMERCS_IOW56AM) ||
+	    (dev->product_id == USB_DEVICE_ID_CODEMERCS_IOW28) ||
+	    (dev->product_id == USB_DEVICE_ID_CODEMERCS_IOW28L)) {
 		res = usb_find_last_int_out_endpoint(iface_desc,
 				&dev->int_out_endpoint);
 		if (res) {
@@ -791,7 +800,9 @@ static int iowarrior_probe(struct usb_interface *interface,
 	dev->report_size = usb_endpoint_maxp(dev->int_in_endpoint);
 	if ((dev->interface->cur_altsetting->desc.bInterfaceNumber == 0) &&
 	    ((dev->product_id == USB_DEVICE_ID_CODEMERCS_IOW56) ||
-	     (dev->product_id == USB_DEVICE_ID_CODEMERCS_IOW56AM)))
+	     (dev->product_id == USB_DEVICE_ID_CODEMERCS_IOW56AM) ||
+	     (dev->product_id == USB_DEVICE_ID_CODEMERCS_IOW28) ||
+	     (dev->product_id == USB_DEVICE_ID_CODEMERCS_IOW28L)))
 		/* IOWarrior56 has wMaxPacketSize different from report size */
 		dev->report_size = 7;
 
-- 
2.25.0


      reply	other threads:[~2020-02-12  4:04 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-02-12  4:04 [PATCH 1/2] USB: misc: iowarrior: add support for 2 OEMed devices Greg Kroah-Hartman
2020-02-12  4:04 ` Greg Kroah-Hartman [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200212040422.2991-2-gregkh@linuxfoundation.org \
    --to=gregkh@linuxfoundation.org \
    --cc=jung@codemercs.com \
    --cc=linux-usb@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.