From: Keerthy <j-keerthy@ti.com> To: <rui.zhang@intel.com>, <robh+dt@kernel.org>, <daniel.lezcano@linaro.org> Cc: <j-keerthy@ti.com>, <amit.kucheria@verdurent.com>, <t-kristo@ti.com>, <devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>, <linux-arm-kernel@lists.infradead.org>, <linux-pm@vger.kernel.org>, <mark.rutland@arm.com> Subject: [PATCH v2 3/4] arm64: dts: ti: am654: Add thermal zones Date: Fri, 14 Feb 2020 12:04:42 +0530 [thread overview] Message-ID: <20200214063443.23589-4-j-keerthy@ti.com> (raw) In-Reply-To: <20200214063443.23589-1-j-keerthy@ti.com> The am654 SoC has three thermal zones namely MPU0, MPU1 and MCU zones Signed-off-by: Keerthy <j-keerthy@ti.com> --- Changes in v2: * Renamed am654-industrial-thermal.dtsi to k3-am654-industrial-thermal.dtsi .../dts/ti/k3-am654-industrial-thermal.dtsi | 45 +++++++++++++++++++ 1 file changed, 45 insertions(+) create mode 100644 arch/arm64/boot/dts/ti/k3-am654-industrial-thermal.dtsi diff --git a/arch/arm64/boot/dts/ti/k3-am654-industrial-thermal.dtsi b/arch/arm64/boot/dts/ti/k3-am654-industrial-thermal.dtsi new file mode 100644 index 000000000000..cdc3d40c3f60 --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am654-industrial-thermal.dtsi @@ -0,0 +1,45 @@ +// SPDX-License-Identifier: GPL-2.0 + +#include <dt-bindings/thermal/thermal.h> + +mpu0_thermal: mpu0_thermal { + polling-delay-passive = <250>; /* milliseconds */ + polling-delay = <500>; /* milliseconds */ + thermal-sensors = <&wkup_vtm0 0>; + + trips { + mpu0_crit: mpu0_crit { + temperature = <125000>; /* milliCelsius */ + hysteresis = <2000>; /* milliCelsius */ + type = "critical"; + }; + }; +}; + +mpu1_thermal: mpu1_thermal { + polling-delay-passive = <250>; /* milliseconds */ + polling-delay = <500>; /* milliseconds */ + thermal-sensors = <&wkup_vtm0 1>; + + trips { + mpu1_crit: mpu1_crit { + temperature = <125000>; /* milliCelsius */ + hysteresis = <2000>; /* milliCelsius */ + type = "critical"; + }; + }; +}; + +mcu_thermal: mcu_thermal { + polling-delay-passive = <250>; /* milliseconds */ + polling-delay = <500>; /* milliseconds */ + thermal-sensors = <&wkup_vtm0 2>; + + trips { + mcu_crit: mcu_crit { + temperature = <125000>; /* milliCelsius */ + hysteresis = <2000>; /* milliCelsius */ + type = "critical"; + }; + }; +}; -- 2.17.1
WARNING: multiple messages have this Message-ID (diff)
From: Keerthy <j-keerthy@ti.com> To: <rui.zhang@intel.com>, <robh+dt@kernel.org>, <daniel.lezcano@linaro.org> Cc: mark.rutland@arm.com, devicetree@vger.kernel.org, amit.kucheria@verdurent.com, linux-pm@vger.kernel.org, j-keerthy@ti.com, linux-kernel@vger.kernel.org, t-kristo@ti.com, linux-arm-kernel@lists.infradead.org Subject: [PATCH v2 3/4] arm64: dts: ti: am654: Add thermal zones Date: Fri, 14 Feb 2020 12:04:42 +0530 [thread overview] Message-ID: <20200214063443.23589-4-j-keerthy@ti.com> (raw) In-Reply-To: <20200214063443.23589-1-j-keerthy@ti.com> The am654 SoC has three thermal zones namely MPU0, MPU1 and MCU zones Signed-off-by: Keerthy <j-keerthy@ti.com> --- Changes in v2: * Renamed am654-industrial-thermal.dtsi to k3-am654-industrial-thermal.dtsi .../dts/ti/k3-am654-industrial-thermal.dtsi | 45 +++++++++++++++++++ 1 file changed, 45 insertions(+) create mode 100644 arch/arm64/boot/dts/ti/k3-am654-industrial-thermal.dtsi diff --git a/arch/arm64/boot/dts/ti/k3-am654-industrial-thermal.dtsi b/arch/arm64/boot/dts/ti/k3-am654-industrial-thermal.dtsi new file mode 100644 index 000000000000..cdc3d40c3f60 --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am654-industrial-thermal.dtsi @@ -0,0 +1,45 @@ +// SPDX-License-Identifier: GPL-2.0 + +#include <dt-bindings/thermal/thermal.h> + +mpu0_thermal: mpu0_thermal { + polling-delay-passive = <250>; /* milliseconds */ + polling-delay = <500>; /* milliseconds */ + thermal-sensors = <&wkup_vtm0 0>; + + trips { + mpu0_crit: mpu0_crit { + temperature = <125000>; /* milliCelsius */ + hysteresis = <2000>; /* milliCelsius */ + type = "critical"; + }; + }; +}; + +mpu1_thermal: mpu1_thermal { + polling-delay-passive = <250>; /* milliseconds */ + polling-delay = <500>; /* milliseconds */ + thermal-sensors = <&wkup_vtm0 1>; + + trips { + mpu1_crit: mpu1_crit { + temperature = <125000>; /* milliCelsius */ + hysteresis = <2000>; /* milliCelsius */ + type = "critical"; + }; + }; +}; + +mcu_thermal: mcu_thermal { + polling-delay-passive = <250>; /* milliseconds */ + polling-delay = <500>; /* milliseconds */ + thermal-sensors = <&wkup_vtm0 2>; + + trips { + mcu_crit: mcu_crit { + temperature = <125000>; /* milliCelsius */ + hysteresis = <2000>; /* milliCelsius */ + type = "critical"; + }; + }; +}; -- 2.17.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2020-02-14 6:35 UTC|newest] Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top 2020-02-14 6:34 [PATCH v2 0/4] thermal: k3: Add support for bandgap sensors Keerthy 2020-02-14 6:34 ` Keerthy 2020-02-14 6:34 ` [PATCH v2 1/4] dt-bindings: thermal: k3: Add VTM bindings documentation Keerthy 2020-02-14 6:34 ` Keerthy 2020-02-18 20:20 ` Rob Herring 2020-02-18 20:20 ` Rob Herring 2020-02-19 7:40 ` Keerthy 2020-02-19 7:40 ` Keerthy 2020-02-20 20:28 ` Rob Herring 2020-02-20 20:28 ` Rob Herring 2020-02-24 1:12 ` J, KEERTHY 2020-02-24 1:12 ` J, KEERTHY 2020-02-14 6:34 ` [PATCH v2 2/4] thermal: k3: Add support for bandgap sensors Keerthy 2020-02-14 6:34 ` Keerthy 2020-02-14 6:34 ` Keerthy [this message] 2020-02-14 6:34 ` [PATCH v2 3/4] arm64: dts: ti: am654: Add thermal zones Keerthy 2020-02-14 6:34 ` [PATCH v2 4/4] arm64: dts: ti: am6: Add VTM node Keerthy 2020-02-14 6:34 ` Keerthy
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20200214063443.23589-4-j-keerthy@ti.com \ --to=j-keerthy@ti.com \ --cc=amit.kucheria@verdurent.com \ --cc=daniel.lezcano@linaro.org \ --cc=devicetree@vger.kernel.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-pm@vger.kernel.org \ --cc=mark.rutland@arm.com \ --cc=robh+dt@kernel.org \ --cc=rui.zhang@intel.com \ --cc=t-kristo@ti.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.