All of lore.kernel.org
 help / color / mirror / Atom feed
From: Alexandru Ardelean <alexandru.ardelean@analog.com>
To: <linux-iio@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Cc: <jic23@kernel.org>, Sergiu Cuciurean <sergiu.cuciurean@analog.com>
Subject: [PATCH v2] iio: amplifiers: ad8366: add support for HMC1119 Attenuator
Date: Fri, 21 Feb 2020 18:18:26 +0200	[thread overview]
Message-ID: <20200221161826.21291-1-alexandru.ardelean@analog.com> (raw)
In-Reply-To: <20200220092821.11050-1-sergiu.cuciurean@analog.com>

From: Sergiu Cuciurean <sergiu.cuciurean@analog.com>

This change adds support for the HMC1119 Silicon Digial Attenuator. The
HMC1119 is a broadband, highly accurate, 7-bit digital attenuator,
operating from 0.1 GHz to 6.0 GHz with 31.5 dB attenuation control range
in 0.25 dB steps.

Link: https://www.analog.com/media/en/technical-documentation/data-sheets/hmc1119.pdf

Signed-off-by: Sergiu Cuciurean <sergiu.cuciurean@analog.com>
---
 drivers/iio/amplifiers/ad8366.c | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)

diff --git a/drivers/iio/amplifiers/ad8366.c b/drivers/iio/amplifiers/ad8366.c
index 95972ab60f42..62167b87caea 100644
--- a/drivers/iio/amplifiers/ad8366.c
+++ b/drivers/iio/amplifiers/ad8366.c
@@ -5,6 +5,7 @@
  *   AD8366 Dual-Digital Variable Gain Amplifier (VGA)
  *   ADA4961 BiCMOS RF Digital Gain Amplifier (DGA)
  *   ADL5240 Digitally controlled variable gain amplifier (VGA)
+ *   HMC1119 0.25 dB LSB, 7-Bit, Silicon Digital Attenuator
  *
  * Copyright 2012-2019 Analog Devices Inc.
  */
@@ -27,6 +28,7 @@ enum ad8366_type {
 	ID_AD8366,
 	ID_ADA4961,
 	ID_ADL5240,
+	ID_HMC1119,
 };
 
 struct ad8366_info {
@@ -62,6 +64,10 @@ static struct ad8366_info ad8366_infos[] = {
 		.gain_min = -11500,
 		.gain_max = 20000,
 	},
+	[ID_HMC1119] = {
+		.gain_min = -31750,
+		.gain_max = 0,
+	},
 };
 
 static int ad8366_write(struct iio_dev *indio_dev,
@@ -84,6 +90,9 @@ static int ad8366_write(struct iio_dev *indio_dev,
 	case ID_ADL5240:
 		st->data[0] = (ch_a & 0x3F);
 		break;
+	case ID_HMC1119:
+		st->data[0] = ch_a;
+		break;
 	}
 
 	ret = spi_write(st->spi, st->data, indio_dev->num_channels);
@@ -118,6 +127,9 @@ static int ad8366_read_raw(struct iio_dev *indio_dev,
 		case ID_ADL5240:
 			gain = 20000 - 31500 + code * 500;
 			break;
+		case ID_HMC1119:
+			gain = -1 * code * 250;
+			break;
 		}
 
 		/* Values in dB */
@@ -164,6 +176,9 @@ static int ad8366_write_raw(struct iio_dev *indio_dev,
 	case ID_ADL5240:
 		code = ((gain - 500 - 20000) / 500) & 0x3F;
 		break;
+	case ID_HMC1119:
+		code = (abs(gain) / 250) & 0x7F;
+		break;
 	}
 
 	mutex_lock(&st->lock);
@@ -246,6 +261,7 @@ static int ad8366_probe(struct spi_device *spi)
 		break;
 	case ID_ADA4961:
 	case ID_ADL5240:
+	case ID_HMC1119:
 		st->reset_gpio = devm_gpiod_get(&spi->dev, "reset",
 			GPIOD_OUT_HIGH);
 		indio_dev->channels = ada4961_channels;
@@ -298,6 +314,7 @@ static const struct spi_device_id ad8366_id[] = {
 	{"ad8366",  ID_AD8366},
 	{"ada4961", ID_ADA4961},
 	{"adl5240", ID_ADL5240},
+	{"hmc1119", ID_HMC1119},
 	{}
 };
 MODULE_DEVICE_TABLE(spi, ad8366_id);
-- 
2.20.1


  parent reply	other threads:[~2020-02-21 16:18 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-02-20  9:28 [PATCH] iio: amplifiers: ad8366: add support for HMC1119 Attenuator Sergiu
2020-02-21 15:32 ` Jonathan Cameron
2020-02-21 16:18 ` Alexandru Ardelean [this message]
2020-02-21 16:29   ` [PATCH v2] " Jonathan Cameron

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200221161826.21291-1-alexandru.ardelean@analog.com \
    --to=alexandru.ardelean@analog.com \
    --cc=jic23@kernel.org \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=sergiu.cuciurean@analog.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.