From: Andre Przywara <andre.przywara@arm.com> To: Rob Herring <robh@kernel.org>, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, devicetree@vger.kernel.org Cc: Robert Richter <rric@kernel.org>, soc@kernel.org, Jon Loeliger <jdl@jdl.com>, Mark Langsdorf <mlangsdo@redhat.com>, Eric Auger <eric.auger@redhat.com>, Will Deacon <will@kernel.org>, Catalin Marinas <catalin.marinas@arm.com> Subject: [PATCH 07/13] dt-bindings: net: Convert Calxeda Ethernet binding to json-schema Date: Wed, 26 Feb 2020 18:08:55 +0000 [thread overview] Message-ID: <20200226180901.89940-8-andre.przywara@arm.com> (raw) In-Reply-To: <20200226180901.89940-1-andre.przywara@arm.com> Convert the Calxeda XGMAC Ethernet device binding to DT schema format using json-schema. Signed-off-by: Andre Przywara <andre.przywara@arm.com> --- .../devicetree/bindings/net/calxeda-xgmac.txt | 18 ------- .../bindings/net/calxeda-xgmac.yaml | 47 +++++++++++++++++++ 2 files changed, 47 insertions(+), 18 deletions(-) delete mode 100644 Documentation/devicetree/bindings/net/calxeda-xgmac.txt create mode 100644 Documentation/devicetree/bindings/net/calxeda-xgmac.yaml diff --git a/Documentation/devicetree/bindings/net/calxeda-xgmac.txt b/Documentation/devicetree/bindings/net/calxeda-xgmac.txt deleted file mode 100644 index c8ae996bd8f2..000000000000 --- a/Documentation/devicetree/bindings/net/calxeda-xgmac.txt +++ /dev/null @@ -1,18 +0,0 @@ -* Calxeda Highbank 10Gb XGMAC Ethernet - -Required properties: -- compatible : Should be "calxeda,hb-xgmac" -- reg : Address and length of the register set for the device -- interrupts : Should contain 3 xgmac interrupts. The 1st is main interrupt. - The 2nd is pwr mgt interrupt. The 3rd is low power state interrupt. - -Optional properties: -- dma-coherent : Present if dma operations are coherent - -Example: - -ethernet@fff50000 { - compatible = "calxeda,hb-xgmac"; - reg = <0xfff50000 0x1000>; - interrupts = <0 77 4 0 78 4 0 79 4>; -}; diff --git a/Documentation/devicetree/bindings/net/calxeda-xgmac.yaml b/Documentation/devicetree/bindings/net/calxeda-xgmac.yaml new file mode 100644 index 000000000000..77b8be9ebb20 --- /dev/null +++ b/Documentation/devicetree/bindings/net/calxeda-xgmac.yaml @@ -0,0 +1,47 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/calxeda-xgmac.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Calxeda Highbank 10Gb XGMAC Ethernet controller + +description: | + The Calxeda XGMAC Ethernet controllers are directly connected to the + internal machine "network fabric", which is set up, initialised and + managed by the firmware. So there are no PHY properties in this + binding. Switches in the fabric take care of routing and mapping the + traffic to external network ports. + +maintainers: + - Andre Przywara <andre.przywara@arm.com> + +properties: + compatible: + const: calxeda,hb-xgmac + + reg: + maxItems: 1 + + interrupts: + description: | + Can point to at most 3 xgmac interrupts. The 1st one is the main + interrupt, the 2nd one is used for power management. The optional + 3rd one is the low power state interrupt. + minItems: 2 + maxItems: 3 + + dma-coherent: true + +required: + - compatible + - reg + - interrupts + +examples: + - | + ethernet@fff50000 { + compatible = "calxeda,hb-xgmac"; + reg = <0xfff50000 0x1000>; + interrupts = <0 77 4>, <0 78 4>, <0 79 4>; + }; -- 2.17.1
WARNING: multiple messages have this Message-ID (diff)
From: Andre Przywara <andre.przywara@arm.com> To: Rob Herring <robh@kernel.org>, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, devicetree@vger.kernel.org Cc: Jon Loeliger <jdl@jdl.com>, Mark Langsdorf <mlangsdo@redhat.com>, Robert Richter <rric@kernel.org>, Catalin Marinas <catalin.marinas@arm.com>, Eric Auger <eric.auger@redhat.com>, soc@kernel.org, Will Deacon <will@kernel.org> Subject: [PATCH 07/13] dt-bindings: net: Convert Calxeda Ethernet binding to json-schema Date: Wed, 26 Feb 2020 18:08:55 +0000 [thread overview] Message-ID: <20200226180901.89940-8-andre.przywara@arm.com> (raw) In-Reply-To: <20200226180901.89940-1-andre.przywara@arm.com> Convert the Calxeda XGMAC Ethernet device binding to DT schema format using json-schema. Signed-off-by: Andre Przywara <andre.przywara@arm.com> --- .../devicetree/bindings/net/calxeda-xgmac.txt | 18 ------- .../bindings/net/calxeda-xgmac.yaml | 47 +++++++++++++++++++ 2 files changed, 47 insertions(+), 18 deletions(-) delete mode 100644 Documentation/devicetree/bindings/net/calxeda-xgmac.txt create mode 100644 Documentation/devicetree/bindings/net/calxeda-xgmac.yaml diff --git a/Documentation/devicetree/bindings/net/calxeda-xgmac.txt b/Documentation/devicetree/bindings/net/calxeda-xgmac.txt deleted file mode 100644 index c8ae996bd8f2..000000000000 --- a/Documentation/devicetree/bindings/net/calxeda-xgmac.txt +++ /dev/null @@ -1,18 +0,0 @@ -* Calxeda Highbank 10Gb XGMAC Ethernet - -Required properties: -- compatible : Should be "calxeda,hb-xgmac" -- reg : Address and length of the register set for the device -- interrupts : Should contain 3 xgmac interrupts. The 1st is main interrupt. - The 2nd is pwr mgt interrupt. The 3rd is low power state interrupt. - -Optional properties: -- dma-coherent : Present if dma operations are coherent - -Example: - -ethernet@fff50000 { - compatible = "calxeda,hb-xgmac"; - reg = <0xfff50000 0x1000>; - interrupts = <0 77 4 0 78 4 0 79 4>; -}; diff --git a/Documentation/devicetree/bindings/net/calxeda-xgmac.yaml b/Documentation/devicetree/bindings/net/calxeda-xgmac.yaml new file mode 100644 index 000000000000..77b8be9ebb20 --- /dev/null +++ b/Documentation/devicetree/bindings/net/calxeda-xgmac.yaml @@ -0,0 +1,47 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/calxeda-xgmac.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Calxeda Highbank 10Gb XGMAC Ethernet controller + +description: | + The Calxeda XGMAC Ethernet controllers are directly connected to the + internal machine "network fabric", which is set up, initialised and + managed by the firmware. So there are no PHY properties in this + binding. Switches in the fabric take care of routing and mapping the + traffic to external network ports. + +maintainers: + - Andre Przywara <andre.przywara@arm.com> + +properties: + compatible: + const: calxeda,hb-xgmac + + reg: + maxItems: 1 + + interrupts: + description: | + Can point to at most 3 xgmac interrupts. The 1st one is the main + interrupt, the 2nd one is used for power management. The optional + 3rd one is the low power state interrupt. + minItems: 2 + maxItems: 3 + + dma-coherent: true + +required: + - compatible + - reg + - interrupts + +examples: + - | + ethernet@fff50000 { + compatible = "calxeda,hb-xgmac"; + reg = <0xfff50000 0x1000>; + interrupts = <0 77 4>, <0 78 4>, <0 79 4>; + }; -- 2.17.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2020-02-26 18:09 UTC|newest] Thread overview: 44+ messages / expand[flat|nested] mbox.gz Atom feed top 2020-02-26 18:08 [PATCH 00/13] arm: calxeda: update DTS, bindings and MAINTAINERS Andre Przywara 2020-02-26 18:08 ` Andre Przywara 2020-02-26 18:08 ` [PATCH 01/13] arm: dts: calxeda: Basic DT file fixes Andre Przywara 2020-02-26 18:08 ` Andre Przywara 2020-02-26 18:08 ` [PATCH 02/13] arm: dts: calxeda: Provide UART clock Andre Przywara 2020-02-26 18:08 ` Andre Przywara 2020-02-26 18:08 ` [PATCH 03/13] arm: dts: calxeda: Fix interrupt grouping Andre Przywara 2020-02-26 18:08 ` Andre Przywara 2020-02-26 18:08 ` [PATCH 04/13] arm: dts: calxeda: Group port-phys and sgpio-gpio items Andre Przywara 2020-02-26 18:08 ` Andre Przywara 2020-02-26 18:08 ` [PATCH 05/13] dt-bindings: clock: Convert Calxeda clock bindings to json-schema Andre Przywara 2020-02-26 18:08 ` Andre Przywara 2020-02-26 18:24 ` Maxime Ripard 2020-02-26 18:24 ` Maxime Ripard 2020-02-26 18:08 ` [PATCH 06/13] dt-bindings: sata: Convert Calxeda SATA controller " Andre Przywara 2020-02-26 18:08 ` Andre Przywara 2020-02-26 18:25 ` Maxime Ripard 2020-02-26 18:25 ` Maxime Ripard 2020-02-26 18:08 ` Andre Przywara [this message] 2020-02-26 18:08 ` [PATCH 07/13] dt-bindings: net: Convert Calxeda Ethernet binding " Andre Przywara 2020-02-26 18:26 ` Maxime Ripard 2020-02-26 18:26 ` Maxime Ripard 2020-02-26 18:08 ` [PATCH 08/13] dt-bindings: phy: Convert Calxeda ComboPHY " Andre Przywara 2020-02-26 18:08 ` Andre Przywara 2020-02-26 18:26 ` Maxime Ripard 2020-02-26 18:26 ` Maxime Ripard 2020-02-26 18:08 ` [PATCH 09/13] dt-bindings: arm: Convert Calxeda L2 cache controller " Andre Przywara 2020-02-26 18:08 ` Andre Przywara 2020-02-26 18:08 ` [PATCH 10/13] dt-bindings: memory-controllers: convert Calxeda DDR " Andre Przywara 2020-02-26 18:08 ` Andre Przywara 2020-02-26 18:27 ` Maxime Ripard 2020-02-26 18:27 ` Maxime Ripard 2020-02-26 18:08 ` [PATCH 11/13] dt-bindings: ipmi: Convert IPMI-SMIC bindings " Andre Przywara 2020-02-26 18:08 ` Andre Przywara 2020-02-26 18:09 ` [PATCH 12/13] dt-bindings: arm: Add Calxeda system registers json-schema binding Andre Przywara 2020-02-26 18:09 ` Andre Przywara 2020-02-26 21:57 ` Rob Herring 2020-02-26 21:57 ` Rob Herring 2020-02-27 0:12 ` André Przywara 2020-02-27 0:12 ` André Przywara 2020-02-27 14:44 ` Rob Herring 2020-02-27 14:44 ` Rob Herring 2020-02-26 18:09 ` [PATCH 13/13] MAINTAINERS: Update Calxeda Highbank maintainership Andre Przywara 2020-02-26 18:09 ` Andre Przywara
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20200226180901.89940-8-andre.przywara@arm.com \ --to=andre.przywara@arm.com \ --cc=catalin.marinas@arm.com \ --cc=devicetree@vger.kernel.org \ --cc=eric.auger@redhat.com \ --cc=jdl@jdl.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=mlangsdo@redhat.com \ --cc=robh@kernel.org \ --cc=rric@kernel.org \ --cc=soc@kernel.org \ --cc=will@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.