From: Martin Kepplinger <martin.kepplinger@puri.sm> To: robh@kernel.org, mark.rutland@arm.com, shawnguo@kernel.org, s.hauer@pengutronix.de, kernel@pengutronix.de, festevam@gmail.com Cc: linux-imx@nxp.com, Anson.Huang@nxp.com, devicetree@vger.kernel.org, kernel@puri.sm, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, "Angus Ainslie (Purism)" <angus@akkea.ca>, Martin Kepplinger <martin.kepplinger@puri.sm> Subject: [PATCH v4 2/8] arm64: dts: librem5-devkit: add the sgtl5000 i2c audio codec Date: Thu, 27 Feb 2020 14:17:27 +0100 [thread overview] Message-ID: <20200227131733.4228-3-martin.kepplinger@puri.sm> (raw) In-Reply-To: <20200227131733.4228-1-martin.kepplinger@puri.sm> From: "Angus Ainslie (Purism)" <angus@akkea.ca> Describe the sgtl5000 of the librem 5 devkit in devicetree. Signed-off-by: Angus Ainslie (Purism) <angus@akkea.ca> Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm> --- .../dts/freescale/imx8mq-librem5-devkit.dts | 60 +++++++++++++++++++ 1 file changed, 60 insertions(+) diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts index bab039500f2b..c829e4579540 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts +++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts @@ -148,6 +148,34 @@ regulator-always-on; }; + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "sgtl5000"; + simple-audio-card,format = "i2s"; + simple-audio-card,widgets = + "Microphone", "Microphone Jack", + "Headphone", "Headphone Jack", + "Speaker", "Speaker Ext", + "Line", "Line In Jack"; + simple-audio-card,routing = + "MIC_IN", "Microphone Jack", + "Microphone Jack", "Mic Bias", + "LINE_IN", "Line In Jack", + "Headphone Jack", "HP_OUT", + "Speaker Ext", "LINE_OUT"; + + simple-audio-card,cpu { + sound-dai = <&sai2>; + }; + + simple-audio-card,codec { + sound-dai = <&sgtl5000>; + clocks = <&clk IMX8MQ_CLK_SAI2_ROOT>; + frame-master; + bitclock-master; + }; + }; + vibrator { compatible = "gpio-vibrator"; pinctrl-names = "default"; @@ -426,6 +454,19 @@ vddio-supply = <®_3v3_p>; }; + sgtl5000: audio-codec@a { + compatible = "fsl,sgtl5000"; + clocks = <&clk IMX8MQ_CLK_SAI2_ROOT>; + assigned-clocks = <&clk IMX8MQ_CLK_SAI2>; + assigned-clock-parents = <&clk IMX8MQ_AUDIO_PLL1_OUT>; + assigned-clock-rates = <24576000>; + #sound-dai-cells = <0>; + reg = <0x0a>; + VDDD-supply = <®_1v8_p>; + VDDIO-supply = <®_3v3_p>; + VDDA-supply = <®_3v3_p>; + }; + touchscreen@5d { compatible = "goodix,gt5688"; reg = <0x5d>; @@ -567,6 +608,16 @@ >; }; + pinctrl_sai2: sai2grp { + fsl,pins = < + MX8MQ_IOMUXC_SAI2_TXFS_SAI2_TX_SYNC 0xd6 + MX8MQ_IOMUXC_SAI2_TXC_SAI2_TX_BCLK 0xd6 + MX8MQ_IOMUXC_SAI2_TXD0_SAI2_TX_DATA0 0xd6 + MX8MQ_IOMUXC_SAI2_RXD0_SAI2_RX_DATA0 0xd6 + MX8MQ_IOMUXC_SAI2_MCLK_SAI2_MCLK 0xd6 + >; + }; + pinctrl_typec: typecgrp { fsl,pins = < MX8MQ_IOMUXC_NAND_DATA06_GPIO3_IO12 0x16 @@ -742,6 +793,15 @@ status = "okay"; }; +&sai2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai2>; + assigned-clocks = <&clk IMX8MQ_CLK_SAI2>; + assigned-clock-parents = <&clk IMX8MQ_AUDIO_PLL1_OUT>; + assigned-clock-rates = <24576000>; + status = "okay"; +}; + &uart1 { /* console */ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; -- 2.20.1
WARNING: multiple messages have this Message-ID (diff)
From: Martin Kepplinger <martin.kepplinger@puri.sm> To: robh@kernel.org, mark.rutland@arm.com, shawnguo@kernel.org, s.hauer@pengutronix.de, kernel@pengutronix.de, festevam@gmail.com Cc: devicetree@vger.kernel.org, kernel@puri.sm, Anson.Huang@nxp.com, Martin Kepplinger <martin.kepplinger@puri.sm>, "Angus Ainslie \(Purism\)" <angus@akkea.ca>, linux-kernel@vger.kernel.org, linux-imx@nxp.com, linux-arm-kernel@lists.infradead.org Subject: [PATCH v4 2/8] arm64: dts: librem5-devkit: add the sgtl5000 i2c audio codec Date: Thu, 27 Feb 2020 14:17:27 +0100 [thread overview] Message-ID: <20200227131733.4228-3-martin.kepplinger@puri.sm> (raw) In-Reply-To: <20200227131733.4228-1-martin.kepplinger@puri.sm> From: "Angus Ainslie (Purism)" <angus@akkea.ca> Describe the sgtl5000 of the librem 5 devkit in devicetree. Signed-off-by: Angus Ainslie (Purism) <angus@akkea.ca> Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm> --- .../dts/freescale/imx8mq-librem5-devkit.dts | 60 +++++++++++++++++++ 1 file changed, 60 insertions(+) diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts index bab039500f2b..c829e4579540 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts +++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts @@ -148,6 +148,34 @@ regulator-always-on; }; + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "sgtl5000"; + simple-audio-card,format = "i2s"; + simple-audio-card,widgets = + "Microphone", "Microphone Jack", + "Headphone", "Headphone Jack", + "Speaker", "Speaker Ext", + "Line", "Line In Jack"; + simple-audio-card,routing = + "MIC_IN", "Microphone Jack", + "Microphone Jack", "Mic Bias", + "LINE_IN", "Line In Jack", + "Headphone Jack", "HP_OUT", + "Speaker Ext", "LINE_OUT"; + + simple-audio-card,cpu { + sound-dai = <&sai2>; + }; + + simple-audio-card,codec { + sound-dai = <&sgtl5000>; + clocks = <&clk IMX8MQ_CLK_SAI2_ROOT>; + frame-master; + bitclock-master; + }; + }; + vibrator { compatible = "gpio-vibrator"; pinctrl-names = "default"; @@ -426,6 +454,19 @@ vddio-supply = <®_3v3_p>; }; + sgtl5000: audio-codec@a { + compatible = "fsl,sgtl5000"; + clocks = <&clk IMX8MQ_CLK_SAI2_ROOT>; + assigned-clocks = <&clk IMX8MQ_CLK_SAI2>; + assigned-clock-parents = <&clk IMX8MQ_AUDIO_PLL1_OUT>; + assigned-clock-rates = <24576000>; + #sound-dai-cells = <0>; + reg = <0x0a>; + VDDD-supply = <®_1v8_p>; + VDDIO-supply = <®_3v3_p>; + VDDA-supply = <®_3v3_p>; + }; + touchscreen@5d { compatible = "goodix,gt5688"; reg = <0x5d>; @@ -567,6 +608,16 @@ >; }; + pinctrl_sai2: sai2grp { + fsl,pins = < + MX8MQ_IOMUXC_SAI2_TXFS_SAI2_TX_SYNC 0xd6 + MX8MQ_IOMUXC_SAI2_TXC_SAI2_TX_BCLK 0xd6 + MX8MQ_IOMUXC_SAI2_TXD0_SAI2_TX_DATA0 0xd6 + MX8MQ_IOMUXC_SAI2_RXD0_SAI2_RX_DATA0 0xd6 + MX8MQ_IOMUXC_SAI2_MCLK_SAI2_MCLK 0xd6 + >; + }; + pinctrl_typec: typecgrp { fsl,pins = < MX8MQ_IOMUXC_NAND_DATA06_GPIO3_IO12 0x16 @@ -742,6 +793,15 @@ status = "okay"; }; +&sai2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai2>; + assigned-clocks = <&clk IMX8MQ_CLK_SAI2>; + assigned-clock-parents = <&clk IMX8MQ_AUDIO_PLL1_OUT>; + assigned-clock-rates = <24576000>; + status = "okay"; +}; + &uart1 { /* console */ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; -- 2.20.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2020-02-27 13:17 UTC|newest] Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top 2020-02-27 13:17 [PATCH v4 0/8] arm64: dts: librem5-devkit: description updates Martin Kepplinger 2020-02-27 13:17 ` Martin Kepplinger 2020-02-27 13:17 ` [PATCH v4 1/8] arm64: dts: librem5-devkit: add a vbus supply to usb0 Martin Kepplinger 2020-02-27 13:17 ` Martin Kepplinger 2020-02-27 13:17 ` Martin Kepplinger [this message] 2020-02-27 13:17 ` [PATCH v4 2/8] arm64: dts: librem5-devkit: add the sgtl5000 i2c audio codec Martin Kepplinger 2020-02-27 13:17 ` [PATCH v4 3/8] arm64: dts: librem5-devkit: add the simcom 7100 modem and audio Martin Kepplinger 2020-02-27 13:17 ` Martin Kepplinger 2020-02-27 13:17 ` [PATCH v4 4/8] arm64: dts: librem5-devkit: allow modem to wake the system from suspend Martin Kepplinger 2020-02-27 13:17 ` Martin Kepplinger 2020-02-27 13:17 ` [PATCH v4 5/8] arm64: dts: librem5-devkit: add the regulators for DVFS Martin Kepplinger 2020-02-27 13:17 ` Martin Kepplinger 2020-02-27 13:17 ` [PATCH v4 6/8] arm64: dts: librem5-devkit: allow the redpine card to be removed Martin Kepplinger 2020-02-27 13:17 ` Martin Kepplinger 2020-02-27 13:17 ` [PATCH v4 7/8] arm64: dts: librem5-devkit: increase the VBUS current in the kernel Martin Kepplinger 2020-02-27 13:17 ` Martin Kepplinger 2020-02-27 13:17 ` [PATCH v4 8/8] arm64: dts: librem5-devkit: add lsm9ds1 mount matrix Martin Kepplinger 2020-02-27 13:17 ` Martin Kepplinger 2020-03-11 7:59 ` [PATCH v4 0/8] arm64: dts: librem5-devkit: description updates Shawn Guo 2020-03-11 7:59 ` Shawn Guo
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20200227131733.4228-3-martin.kepplinger@puri.sm \ --to=martin.kepplinger@puri.sm \ --cc=Anson.Huang@nxp.com \ --cc=angus@akkea.ca \ --cc=devicetree@vger.kernel.org \ --cc=festevam@gmail.com \ --cc=kernel@pengutronix.de \ --cc=kernel@puri.sm \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-imx@nxp.com \ --cc=linux-kernel@vger.kernel.org \ --cc=mark.rutland@arm.com \ --cc=robh@kernel.org \ --cc=s.hauer@pengutronix.de \ --cc=shawnguo@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.