From: Johan Jonker <jbx6244@gmail.com> To: heiko@sntech.de Cc: robh+dt@kernel.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-rockchip@lists.infradead.org, linux-kernel@vger.kernel.org Subject: [PATCH 2/2] arm64: dts: remove g-use-dma from rockchip usb nodes Date: Fri, 28 Feb 2020 12:39:22 +0100 [thread overview] Message-ID: <20200228113922.20266-2-jbx6244@gmail.com> (raw) In-Reply-To: <20200228113922.20266-1-jbx6244@gmail.com> A test with the command below gives these errors: arch/arm64/boot/dts/rockchip/px30-evb.dt.yaml: usb@ff300000: 'g-use-dma', 'power-domains' do not match any of the regexes: 'pinctrl-[0-9]+' arch/arm64/boot/dts/rockchip/rk3328-a1.dt.yaml: usb@ff580000: 'g-use-dma' does not match any of the regexes: 'pinctrl-[0-9]+' arch/arm64/boot/dts/rockchip/rk3328-evb.dt.yaml: usb@ff580000: 'g-use-dma' does not match any of the regexes: 'pinctrl-[0-9]+' arch/arm64/boot/dts/rockchip/rk3328-rock64.dt.yaml: usb@ff580000: 'g-use-dma' does not match any of the regexes: 'pinctrl-[0-9]+' arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dt.yaml: usb@ff580000: 'g-use-dma' does not match any of the regexes: 'pinctrl-[0-9]+' 'g-use-dma' is not a valid option in dwc2.yaml, so remove it from all Rockchip dtsi files. make ARCH=arm64 dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/usb/dwc2.yaml Signed-off-by: Johan Jonker <jbx6244@gmail.com> --- arch/arm64/boot/dts/rockchip/px30.dtsi | 1 - arch/arm64/boot/dts/rockchip/rk3328.dtsi | 1 - 2 files changed, 2 deletions(-) diff --git a/arch/arm64/boot/dts/rockchip/px30.dtsi b/arch/arm64/boot/dts/rockchip/px30.dtsi index 75908c587..4f484119f 100644 --- a/arch/arm64/boot/dts/rockchip/px30.dtsi +++ b/arch/arm64/boot/dts/rockchip/px30.dtsi @@ -870,7 +870,6 @@ g-np-tx-fifo-size = <16>; g-rx-fifo-size = <280>; g-tx-fifo-size = <256 128 128 64 32 16>; - g-use-dma; phys = <&u2phy_otg>; phy-names = "usb2-phy"; power-domains = <&power PX30_PD_USB>; diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi index 1f53ead52..bad41bc6f 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi @@ -957,7 +957,6 @@ g-np-tx-fifo-size = <16>; g-rx-fifo-size = <280>; g-tx-fifo-size = <256 128 128 64 32 16>; - g-use-dma; phys = <&u2phy_otg>; phy-names = "usb2-phy"; status = "disabled"; -- 2.11.0
WARNING: multiple messages have this Message-ID (diff)
From: Johan Jonker <jbx6244@gmail.com> To: heiko@sntech.de Cc: devicetree@vger.kernel.org, robh+dt@kernel.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-rockchip@lists.infradead.org Subject: [PATCH 2/2] arm64: dts: remove g-use-dma from rockchip usb nodes Date: Fri, 28 Feb 2020 12:39:22 +0100 [thread overview] Message-ID: <20200228113922.20266-2-jbx6244@gmail.com> (raw) In-Reply-To: <20200228113922.20266-1-jbx6244@gmail.com> A test with the command below gives these errors: arch/arm64/boot/dts/rockchip/px30-evb.dt.yaml: usb@ff300000: 'g-use-dma', 'power-domains' do not match any of the regexes: 'pinctrl-[0-9]+' arch/arm64/boot/dts/rockchip/rk3328-a1.dt.yaml: usb@ff580000: 'g-use-dma' does not match any of the regexes: 'pinctrl-[0-9]+' arch/arm64/boot/dts/rockchip/rk3328-evb.dt.yaml: usb@ff580000: 'g-use-dma' does not match any of the regexes: 'pinctrl-[0-9]+' arch/arm64/boot/dts/rockchip/rk3328-rock64.dt.yaml: usb@ff580000: 'g-use-dma' does not match any of the regexes: 'pinctrl-[0-9]+' arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dt.yaml: usb@ff580000: 'g-use-dma' does not match any of the regexes: 'pinctrl-[0-9]+' 'g-use-dma' is not a valid option in dwc2.yaml, so remove it from all Rockchip dtsi files. make ARCH=arm64 dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/usb/dwc2.yaml Signed-off-by: Johan Jonker <jbx6244@gmail.com> --- arch/arm64/boot/dts/rockchip/px30.dtsi | 1 - arch/arm64/boot/dts/rockchip/rk3328.dtsi | 1 - 2 files changed, 2 deletions(-) diff --git a/arch/arm64/boot/dts/rockchip/px30.dtsi b/arch/arm64/boot/dts/rockchip/px30.dtsi index 75908c587..4f484119f 100644 --- a/arch/arm64/boot/dts/rockchip/px30.dtsi +++ b/arch/arm64/boot/dts/rockchip/px30.dtsi @@ -870,7 +870,6 @@ g-np-tx-fifo-size = <16>; g-rx-fifo-size = <280>; g-tx-fifo-size = <256 128 128 64 32 16>; - g-use-dma; phys = <&u2phy_otg>; phy-names = "usb2-phy"; power-domains = <&power PX30_PD_USB>; diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi index 1f53ead52..bad41bc6f 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi @@ -957,7 +957,6 @@ g-np-tx-fifo-size = <16>; g-rx-fifo-size = <280>; g-tx-fifo-size = <256 128 128 64 32 16>; - g-use-dma; phys = <&u2phy_otg>; phy-names = "usb2-phy"; status = "disabled"; -- 2.11.0 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2020-02-28 11:39 UTC|newest] Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top 2020-02-28 11:39 [PATCH 1/2] ARM: dts: remove g-use-dma from rockchip usb nodes Johan Jonker 2020-02-28 11:39 ` Johan Jonker 2020-02-28 11:39 ` Johan Jonker [this message] 2020-02-28 11:39 ` [PATCH 2/2] arm64: " Johan Jonker 2020-02-29 23:47 ` [PATCH 1/2] ARM: " Heiko Stuebner 2020-02-29 23:47 ` Heiko Stuebner 2020-02-29 23:47 ` Heiko Stuebner
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20200228113922.20266-2-jbx6244@gmail.com \ --to=jbx6244@gmail.com \ --cc=devicetree@vger.kernel.org \ --cc=heiko@sntech.de \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-rockchip@lists.infradead.org \ --cc=robh+dt@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.