[PATCH] Input: synaptics-rmi4 - Do not set reduced reporting mode thresholds are not set by the driver

From: Andrew Duggan <aduggan@synaptics.com>
To: linux-input@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: Andrew Duggan <aduggan@synaptics.com>,
	Dmitry Torokhov <dmitry.torokhov@gmail.com>,
	Paul Hollinsky <phollinsky@holtechnik.com>,
	Christopher Heiny <Cheiny@synaptics.com>,
	Lucas Stach <l.stach@pengutronix.de>,
	kernel@pengutronix.de, patchwork-lst@pengutronix.de
Subject: [PATCH] Input: synaptics-rmi4 - Do not set reduced reporting mode thresholds are not set by the driver
Date: Wed, 11 Mar 2020 17:55:49 -0700	[thread overview]
Message-ID: <20200312005549.29922-1-aduggan@synaptics.com> (raw)

The previous patch "c5ccf2ad3d33 (Input: synaptics-rmi4 - switch to
reduced reporting mode)" enabled reduced reporting mode unintentionally
on some devices, if the firmware was configured with default Delta X/Y
threshold values. The result unintentionally degrade the performance of
some touchpads.

This patch checks to see that the driver is modifying the delta X/Y
thresholds before modifying the reporting mode.

Signed-off-by: Andrew Duggan <aduggan@synaptics.com>
---
 drivers/input/rmi4/rmi_f11.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/input/rmi4/rmi_f11.c b/drivers/input/rmi4/rmi_f11.c
index 6adea8a3e8fb..ffa39ab153f2 100644
--- a/drivers/input/rmi4/rmi_f11.c
+++ b/drivers/input/rmi4/rmi_f11.c
@@ -1203,8 +1203,8 @@ static int rmi_f11_initialize(struct rmi_function *fn)
 	 * If distance threshold values are set, switch to reduced reporting
 	 * mode so they actually get used by the controller.
 	 */
-	if (ctrl->ctrl0_11[RMI_F11_DELTA_X_THRESHOLD] ||
-	    ctrl->ctrl0_11[RMI_F11_DELTA_Y_THRESHOLD]) {
+	if (sensor->axis_align.delta_x_threshold ||
+	    sensor->axis_align.delta_y_threshold) {
 		ctrl->ctrl0_11[0] &= ~RMI_F11_REPORT_MODE_MASK;
 		ctrl->ctrl0_11[0] |= RMI_F11_REPORT_MODE_REDUCED;
 	}
-- 
2.20.1

