From: Keerthy <j-keerthy@ti.com> To: <rui.zhang@intel.com>, <robh+dt@kernel.org>, <daniel.lezcano@linaro.org> Cc: <j-keerthy@ti.com>, <amit.kucheria@verdurent.com>, <t-kristo@ti.com>, <devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>, <linux-arm-kernel@lists.infradead.org>, <linux-pm@vger.kernel.org>, <mark.rutland@arm.com> Subject: [RESEND PATCH v4 3/4] arm64: dts: ti: am654: Add thermal zones Date: Wed, 18 Mar 2020 14:00:27 +0530 [thread overview] Message-ID: <20200318083028.9984-4-j-keerthy@ti.com> (raw) In-Reply-To: <20200318083028.9984-1-j-keerthy@ti.com> The am654 SoC has three thermal zones namely MPU0, MPU1 and MCU zones Signed-off-by: Keerthy <j-keerthy@ti.com> --- .../dts/ti/k3-am654-industrial-thermal.dtsi | 45 +++++++++++++++++++ 1 file changed, 45 insertions(+) create mode 100644 arch/arm64/boot/dts/ti/k3-am654-industrial-thermal.dtsi diff --git a/arch/arm64/boot/dts/ti/k3-am654-industrial-thermal.dtsi b/arch/arm64/boot/dts/ti/k3-am654-industrial-thermal.dtsi new file mode 100644 index 000000000000..cdc3d40c3f60 --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am654-industrial-thermal.dtsi @@ -0,0 +1,45 @@ +// SPDX-License-Identifier: GPL-2.0 + +#include <dt-bindings/thermal/thermal.h> + +mpu0_thermal: mpu0_thermal { + polling-delay-passive = <250>; /* milliseconds */ + polling-delay = <500>; /* milliseconds */ + thermal-sensors = <&wkup_vtm0 0>; + + trips { + mpu0_crit: mpu0_crit { + temperature = <125000>; /* milliCelsius */ + hysteresis = <2000>; /* milliCelsius */ + type = "critical"; + }; + }; +}; + +mpu1_thermal: mpu1_thermal { + polling-delay-passive = <250>; /* milliseconds */ + polling-delay = <500>; /* milliseconds */ + thermal-sensors = <&wkup_vtm0 1>; + + trips { + mpu1_crit: mpu1_crit { + temperature = <125000>; /* milliCelsius */ + hysteresis = <2000>; /* milliCelsius */ + type = "critical"; + }; + }; +}; + +mcu_thermal: mcu_thermal { + polling-delay-passive = <250>; /* milliseconds */ + polling-delay = <500>; /* milliseconds */ + thermal-sensors = <&wkup_vtm0 2>; + + trips { + mcu_crit: mcu_crit { + temperature = <125000>; /* milliCelsius */ + hysteresis = <2000>; /* milliCelsius */ + type = "critical"; + }; + }; +}; -- 2.17.1
WARNING: multiple messages have this Message-ID (diff)
From: Keerthy <j-keerthy@ti.com> To: <rui.zhang@intel.com>, <robh+dt@kernel.org>, <daniel.lezcano@linaro.org> Cc: mark.rutland@arm.com, devicetree@vger.kernel.org, amit.kucheria@verdurent.com, linux-pm@vger.kernel.org, j-keerthy@ti.com, linux-kernel@vger.kernel.org, t-kristo@ti.com, linux-arm-kernel@lists.infradead.org Subject: [RESEND PATCH v4 3/4] arm64: dts: ti: am654: Add thermal zones Date: Wed, 18 Mar 2020 14:00:27 +0530 [thread overview] Message-ID: <20200318083028.9984-4-j-keerthy@ti.com> (raw) In-Reply-To: <20200318083028.9984-1-j-keerthy@ti.com> The am654 SoC has three thermal zones namely MPU0, MPU1 and MCU zones Signed-off-by: Keerthy <j-keerthy@ti.com> --- .../dts/ti/k3-am654-industrial-thermal.dtsi | 45 +++++++++++++++++++ 1 file changed, 45 insertions(+) create mode 100644 arch/arm64/boot/dts/ti/k3-am654-industrial-thermal.dtsi diff --git a/arch/arm64/boot/dts/ti/k3-am654-industrial-thermal.dtsi b/arch/arm64/boot/dts/ti/k3-am654-industrial-thermal.dtsi new file mode 100644 index 000000000000..cdc3d40c3f60 --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am654-industrial-thermal.dtsi @@ -0,0 +1,45 @@ +// SPDX-License-Identifier: GPL-2.0 + +#include <dt-bindings/thermal/thermal.h> + +mpu0_thermal: mpu0_thermal { + polling-delay-passive = <250>; /* milliseconds */ + polling-delay = <500>; /* milliseconds */ + thermal-sensors = <&wkup_vtm0 0>; + + trips { + mpu0_crit: mpu0_crit { + temperature = <125000>; /* milliCelsius */ + hysteresis = <2000>; /* milliCelsius */ + type = "critical"; + }; + }; +}; + +mpu1_thermal: mpu1_thermal { + polling-delay-passive = <250>; /* milliseconds */ + polling-delay = <500>; /* milliseconds */ + thermal-sensors = <&wkup_vtm0 1>; + + trips { + mpu1_crit: mpu1_crit { + temperature = <125000>; /* milliCelsius */ + hysteresis = <2000>; /* milliCelsius */ + type = "critical"; + }; + }; +}; + +mcu_thermal: mcu_thermal { + polling-delay-passive = <250>; /* milliseconds */ + polling-delay = <500>; /* milliseconds */ + thermal-sensors = <&wkup_vtm0 2>; + + trips { + mcu_crit: mcu_crit { + temperature = <125000>; /* milliCelsius */ + hysteresis = <2000>; /* milliCelsius */ + type = "critical"; + }; + }; +}; -- 2.17.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2020-03-18 8:30 UTC|newest] Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top 2020-03-18 8:30 [PATCH v4 0/4] thermal: k3: Add support for bandgap sensors Keerthy 2020-03-18 8:30 ` Keerthy 2020-03-18 8:30 ` [RESEND PATCH v4 1/4] dt-bindings: thermal: k3: Add VTM bindings documentation Keerthy 2020-03-18 8:30 ` Keerthy 2020-03-30 23:00 ` Rob Herring 2020-03-30 23:00 ` Rob Herring 2020-03-18 8:30 ` [RESEND PATCH v4 2/4] thermal: k3: Add support for bandgap sensors Keerthy 2020-03-18 8:30 ` Keerthy 2020-03-19 12:38 ` Daniel Lezcano 2020-03-19 12:38 ` Daniel Lezcano 2020-03-19 12:52 ` Keerthy 2020-03-19 12:52 ` Keerthy 2020-03-19 13:36 ` Daniel Lezcano 2020-03-19 13:36 ` Daniel Lezcano 2020-03-23 3:52 ` J, KEERTHY 2020-03-23 3:52 ` J, KEERTHY 2020-03-18 8:30 ` Keerthy [this message] 2020-03-18 8:30 ` [RESEND PATCH v4 3/4] arm64: dts: ti: am654: Add thermal zones Keerthy 2020-03-18 8:30 ` [RESEND PATCH v4 4/4] arm64: dts: ti: am6: Add VTM node Keerthy 2020-03-18 8:30 ` Keerthy
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20200318083028.9984-4-j-keerthy@ti.com \ --to=j-keerthy@ti.com \ --cc=amit.kucheria@verdurent.com \ --cc=daniel.lezcano@linaro.org \ --cc=devicetree@vger.kernel.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-pm@vger.kernel.org \ --cc=mark.rutland@arm.com \ --cc=robh+dt@kernel.org \ --cc=rui.zhang@intel.com \ --cc=t-kristo@ti.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.