All of lore.kernel.org
 help / color / mirror / Atom feed
From: Geert Uytterhoeven <geert+renesas@glider.be>
To: Linus Walleij <linus.walleij@linaro.org>,
	Bartosz Golaszewski <bgolaszewski@baylibre.com>,
	Jonathan Corbet <corbet@lwn.net>,
	Harish Jenny K N <harish_kandiga@mentor.com>,
	Eugeniu Rosca <erosca@de.adit-jv.com>
Cc: Alexander Graf <graf@amazon.com>,
	Peter Maydell <peter.maydell@linaro.org>,
	Paolo Bonzini <pbonzini@redhat.com>,
	Phil Reid <preid@electromag.com.au>,
	Marc Zyngier <marc.zyngier@arm.com>,
	Christoffer Dall <christoffer.dall@arm.com>,
	Magnus Damm <magnus.damm@gmail.com>,
	Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	linux-gpio@vger.kernel.org, linux-doc@vger.kernel.org,
	linux-renesas-soc@vger.kernel.org, linux-kernel@vger.kernel.org,
	qemu-devel@nongnu.org,
	Geert Uytterhoeven <geert+renesas@glider.be>
Subject: [PATCH v6 6/8] gpio: Add GPIO Aggregator
Date: Tue, 24 Mar 2020 14:56:51 +0100	[thread overview]
Message-ID: <20200324135653.6676-6-geert+renesas@glider.be> (raw)
In-Reply-To: <20200324135653.6676-1-geert+renesas@glider.be>

GPIO controllers are exported to userspace using /dev/gpiochip*
character devices.  Access control to these devices is provided by
standard UNIX file system permissions, on an all-or-nothing basis:
either a GPIO controller is accessible for a user, or it is not.
Currently no mechanism exists to control access to individual GPIOs.

Hence add a GPIO driver to aggregate existing GPIOs, and expose them as
a new gpiochip.

This supports the following use cases:
  - Aggregating GPIOs using Sysfs
    This is useful for implementing access control, and assigning a set
    of GPIOs to a specific user or virtual machine.
  - Generic GPIO Driver
    This is useful for industrial control, where it can provide
    userspace access to a simple GPIO-operated device described in DT,
    cfr. e.g. spidev for SPI-operated devices.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Tested-by: Eugeniu Rosca <erosca@de.adit-jv.com>
---
v6:
  - Use gpiod_to_chip() instead of open-coding,
  - Drop debug print of gpio_desc.label, as it usually just points to
    the GPIO Aggregator itself,
  - Drop no longer needed #include "gpiolib.h",
  - Fix missing offset translation in gpio_fwd_set_config(),
  - Use GPIO_LOOKUP_IDX() to populate struct gpiod_lookup,

v5:
  - Add Reviewed-by, Tested-by,

v4:
  - Remove unused assignment to n in isrange(),
  - Check correct pointer after aggr->lookups->dev_id allocation,
  - Preinitialize flags to 0 in gpio_fwd_[gs]et_multiple() to avoid
    may-be-used-uninitialized warning,
  - Drop controversial GPIO repeater,
  - Update for gpiod_lookup.chip_label rename,
  - Use %pe to format error pointers,
  - Use U16_MAX instead of (u16)-1,
  - Correct comment indentation,
  - Use skip_spaces() helper,
  - Rename a and b to first_index resp. last_index,
  - Add comment to tmp[] use,
  - Improve Kconfig help text,
  - Include <linux/gpio/consumer.h> for gpiod_[gs]et_*(),
  - Drop unneeded valid_mask handling,
  - Add comment about sleeping and .set_config() support,

v3:
  - Absorb GPIO forwarder,
  - Integrate GPIO Repeater and Generic GPIO driver functionality,
  - Use the aggregator parameters to create a GPIO lookup table instead
    of an array of GPIO descriptors, which allows to simplify the code:
      1. This removes the need for calling gpio_name_to_desc(),
         gpiochip_find(), gpiochip_get_desc(), and gpiod_request(),
      2. This allows the platform device to always use
         devm_gpiod_get_index(), regardless of the origin of the GPIOs,
  - Move parameter parsing from platform device probe to sysfs attribute
    store, removing the need for platform data passing,
  - Use more devm_*() functions to simplify cleanup,
  - Add pr_fmt(),
  - General refactoring,

v2:
  - Add missing initialization of i in gpio_virt_agg_probe(),
  - Update for removed .need_valid_mask field and changed
    .init_valid_mask() signature,
  - Drop "virtual", rename to gpio-aggregator,
  - Drop bogus FIXME related to gpiod_set_transitory() expectations,
  - Use new GPIO Forwarder Helper,
  - Lift limit on the maximum number of GPIOs,
  - Improve parsing:
      - add support for specifying GPIOs by line name,
      - add support for specifying GPIO chips by ID,
      - add support for GPIO offset ranges,
      - names and offset specifiers must be separated by whitespace,
      - GPIO offsets must separated by spaces,
  - Use str_has_prefix() and kstrtouint().
---
 drivers/gpio/Kconfig           |  12 +
 drivers/gpio/Makefile          |   1 +
 drivers/gpio/gpio-aggregator.c | 568 +++++++++++++++++++++++++++++++++
 3 files changed, 581 insertions(+)
 create mode 100644 drivers/gpio/gpio-aggregator.c

diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 6234ccc90e7eb4a1..6ddc7353a46afdf6 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -1541,6 +1541,18 @@ config GPIO_VIPERBOARD
 
 endmenu
 
+config GPIO_AGGREGATOR
+	tristate "GPIO Aggregator"
+	help
+	  Say yes here to enable the GPIO Aggregator, which provides a way to
+	  aggregate existing GPIO lines into a new virtual GPIO chip.
+	  This can serve the following purposes:
+	    - Assign permissions for a collection of GPIO lines to a user,
+	    - Export a collection of GPIO lines to a virtual machine,
+	    - Provide a generic driver for a GPIO-operated device in an
+	      industrial control context, to be operated from userspace using
+	      the GPIO chardev interface.
+
 config GPIO_MOCKUP
 	tristate "GPIO Testing Driver"
 	select IRQ_SIM
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index b2cfc21a97f3e52b..65bf3940e33cf734 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -25,6 +25,7 @@ obj-$(CONFIG_GPIO_74XX_MMIO)		+= gpio-74xx-mmio.o
 obj-$(CONFIG_GPIO_ADNP)			+= gpio-adnp.o
 obj-$(CONFIG_GPIO_ADP5520)		+= gpio-adp5520.o
 obj-$(CONFIG_GPIO_ADP5588)		+= gpio-adp5588.o
+obj-$(CONFIG_GPIO_AGGREGATOR)		+= gpio-aggregator.o
 obj-$(CONFIG_GPIO_ALTERA_A10SR)		+= gpio-altera-a10sr.o
 obj-$(CONFIG_GPIO_ALTERA)  		+= gpio-altera.o
 obj-$(CONFIG_GPIO_AMD8111)		+= gpio-amd8111.o
diff --git a/drivers/gpio/gpio-aggregator.c b/drivers/gpio/gpio-aggregator.c
new file mode 100644
index 0000000000000000..9b0adbdddbfccb30
--- /dev/null
+++ b/drivers/gpio/gpio-aggregator.c
@@ -0,0 +1,568 @@
+// SPDX-License-Identifier: GPL-2.0-only
+//
+// GPIO Aggregator
+//
+// Copyright (C) 2019-2020 Glider bv
+
+#define DRV_NAME       "gpio-aggregator"
+#define pr_fmt(fmt)	DRV_NAME ": " fmt
+
+#include <linux/bitmap.h>
+#include <linux/bitops.h>
+#include <linux/ctype.h>
+#include <linux/gpio/consumer.h>
+#include <linux/gpio/driver.h>
+#include <linux/gpio/machine.h>
+#include <linux/idr.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/overflow.h>
+#include <linux/platform_device.h>
+#include <linux/spinlock.h>
+#include <linux/string.h>
+
+
+/*
+ * GPIO Aggregator sysfs interface
+ */
+
+struct gpio_aggregator {
+	struct gpiod_lookup_table *lookups;
+	struct platform_device *pdev;
+	char args[];
+};
+
+static DEFINE_MUTEX(gpio_aggregator_lock);	/* protects idr */
+static DEFINE_IDR(gpio_aggregator_idr);
+
+static char *get_arg(char **args)
+{
+	char *start = *args, *end;
+
+	start = skip_spaces(start);
+	if (!*start)
+		return NULL;
+
+	if (*start == '"') {
+		/* Quoted arg */
+		end = strchr(++start, '"');
+		if (!end)
+			return ERR_PTR(-EINVAL);
+	} else {
+		/* Unquoted arg */
+		for (end = start; *end && !isspace(*end); end++) ;
+	}
+
+	if (*end)
+		*end++ = '\0';
+
+	*args = end;
+	return start;
+}
+
+static bool isrange(const char *s)
+{
+	size_t n;
+
+	if (IS_ERR_OR_NULL(s))
+		return false;
+
+	while (1) {
+		n = strspn(s, "0123456789");
+		if (!n)
+			return false;
+
+		s += n;
+
+		switch (*s++) {
+		case '\0':
+			return true;
+
+		case '-':
+		case ',':
+			break;
+
+		default:
+			return false;
+		}
+	}
+}
+
+static int aggr_add_gpio(struct gpio_aggregator *aggr, const char *key,
+			 int hwnum, unsigned int *n)
+{
+	struct gpiod_lookup_table *lookups;
+
+	lookups = krealloc(aggr->lookups, struct_size(lookups, table, *n + 2),
+			   GFP_KERNEL);
+	if (!lookups)
+		return -ENOMEM;
+
+	lookups->table[*n] =
+		(struct gpiod_lookup)GPIO_LOOKUP_IDX(key, hwnum, NULL, *n, 0);
+
+	(*n)++;
+	memset(&lookups->table[*n], 0, sizeof(lookups->table[*n]));
+
+	aggr->lookups = lookups;
+	return 0;
+}
+
+static int aggr_parse(struct gpio_aggregator *aggr)
+{
+	unsigned int first_index, last_index, i, n = 0;
+	char *name, *offsets, *first, *last, *next;
+	char *args = aggr->args;
+	int error;
+
+	for (name = get_arg(&args), offsets = get_arg(&args); name;
+	     offsets = get_arg(&args)) {
+		if (IS_ERR(name)) {
+			pr_err("Cannot get GPIO specifier: %pe\n", name);
+			return PTR_ERR(name);
+		}
+
+		if (!isrange(offsets)) {
+			/* Named GPIO line */
+			error = aggr_add_gpio(aggr, name, U16_MAX, &n);
+			if (error)
+				return error;
+
+			name = offsets;
+			continue;
+		}
+
+		/* GPIO chip + offset(s) */
+		for (first = offsets; *first; first = next) {
+			next = strchrnul(first, ',');
+			if (*next)
+				*next++ = '\0';
+
+			last = strchr(first, '-');
+			if (last)
+				*last++ = '\0';
+
+			if (kstrtouint(first, 10, &first_index)) {
+				pr_err("Cannot parse GPIO index %s\n", first);
+				return -EINVAL;
+			}
+
+			if (!last) {
+				last_index = first_index;
+			} else if (kstrtouint(last, 10, &last_index)) {
+				pr_err("Cannot parse GPIO index %s\n", last);
+				return -EINVAL;
+			}
+
+			for (i = first_index; i <= last_index; i++) {
+				error = aggr_add_gpio(aggr, name, i, &n);
+				if (error)
+					return error;
+			}
+		}
+
+		name = get_arg(&args);
+	}
+
+	if (!n) {
+		pr_err("No GPIOs specified\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static ssize_t new_device_store(struct device_driver *driver, const char *buf,
+				size_t count)
+{
+	struct gpio_aggregator *aggr;
+	struct platform_device *pdev;
+	int res, id;
+
+	/* kernfs guarantees string termination, so count + 1 is safe */
+	aggr = kzalloc(sizeof(*aggr) + count + 1, GFP_KERNEL);
+	if (!aggr)
+		return -ENOMEM;
+
+	memcpy(aggr->args, buf, count + 1);
+
+	aggr->lookups = kzalloc(struct_size(aggr->lookups, table, 1),
+				GFP_KERNEL);
+	if (!aggr->lookups) {
+		res = -ENOMEM;
+		goto free_ga;
+	}
+
+	mutex_lock(&gpio_aggregator_lock);
+	id = idr_alloc(&gpio_aggregator_idr, aggr, 0, 0, GFP_KERNEL);
+	mutex_unlock(&gpio_aggregator_lock);
+
+	if (id < 0) {
+		res = id;
+		goto free_table;
+	}
+
+	aggr->lookups->dev_id = kasprintf(GFP_KERNEL, "%s.%d", DRV_NAME, id);
+	if (!aggr->lookups->dev_id) {
+		res = -ENOMEM;
+		goto remove_idr;
+	}
+
+	res = aggr_parse(aggr);
+	if (res)
+		goto free_dev_id;
+
+	gpiod_add_lookup_table(aggr->lookups);
+
+	pdev = platform_device_register_simple(DRV_NAME, id, NULL, 0);
+	if (IS_ERR(pdev)) {
+		res = PTR_ERR(pdev);
+		goto remove_table;
+	}
+
+	aggr->pdev = pdev;
+	return count;
+
+remove_table:
+	gpiod_remove_lookup_table(aggr->lookups);
+free_dev_id:
+	kfree(aggr->lookups->dev_id);
+remove_idr:
+	mutex_lock(&gpio_aggregator_lock);
+	idr_remove(&gpio_aggregator_idr, id);
+	mutex_unlock(&gpio_aggregator_lock);
+free_table:
+	kfree(aggr->lookups);
+free_ga:
+	kfree(aggr);
+	return res;
+}
+
+static DRIVER_ATTR_WO(new_device);
+
+static void gpio_aggregator_free(struct gpio_aggregator *aggr)
+{
+	platform_device_unregister(aggr->pdev);
+	gpiod_remove_lookup_table(aggr->lookups);
+	kfree(aggr->lookups->dev_id);
+	kfree(aggr->lookups);
+	kfree(aggr);
+}
+
+static ssize_t delete_device_store(struct device_driver *driver,
+				   const char *buf, size_t count)
+{
+	struct gpio_aggregator *aggr;
+	unsigned int id;
+	int error;
+
+	if (!str_has_prefix(buf, DRV_NAME "."))
+		return -EINVAL;
+
+	error = kstrtouint(buf + strlen(DRV_NAME "."), 10, &id);
+	if (error)
+		return error;
+
+	mutex_lock(&gpio_aggregator_lock);
+	aggr = idr_remove(&gpio_aggregator_idr, id);
+	mutex_unlock(&gpio_aggregator_lock);
+	if (!aggr)
+		return -ENOENT;
+
+	gpio_aggregator_free(aggr);
+	return count;
+}
+static DRIVER_ATTR_WO(delete_device);
+
+static struct attribute *gpio_aggregator_attrs[] = {
+	&driver_attr_new_device.attr,
+	&driver_attr_delete_device.attr,
+	NULL,
+};
+ATTRIBUTE_GROUPS(gpio_aggregator);
+
+static int __exit gpio_aggregator_idr_remove(int id, void *p, void *data)
+{
+	gpio_aggregator_free(p);
+	return 0;
+}
+
+static void __exit gpio_aggregator_remove_all(void)
+{
+	mutex_lock(&gpio_aggregator_lock);
+	idr_for_each(&gpio_aggregator_idr, gpio_aggregator_idr_remove, NULL);
+	idr_destroy(&gpio_aggregator_idr);
+	mutex_unlock(&gpio_aggregator_lock);
+}
+
+
+/*
+ *  GPIO Forwarder
+ */
+
+struct gpiochip_fwd {
+	struct gpio_chip chip;
+	struct gpio_desc **descs;
+	union {
+		struct mutex mlock;	/* protects tmp[] if can_sleep */
+		spinlock_t slock;	/* protects tmp[] if !can_sleep */
+	};
+	unsigned long tmp[];		/* values and descs for multiple ops */
+};
+
+static int gpio_fwd_get_direction(struct gpio_chip *chip, unsigned int offset)
+{
+	struct gpiochip_fwd *fwd = gpiochip_get_data(chip);
+
+	return gpiod_get_direction(fwd->descs[offset]);
+}
+
+static int gpio_fwd_direction_input(struct gpio_chip *chip, unsigned int offset)
+{
+	struct gpiochip_fwd *fwd = gpiochip_get_data(chip);
+
+	return gpiod_direction_input(fwd->descs[offset]);
+}
+
+static int gpio_fwd_direction_output(struct gpio_chip *chip,
+				     unsigned int offset, int value)
+{
+	struct gpiochip_fwd *fwd = gpiochip_get_data(chip);
+
+	return gpiod_direction_output(fwd->descs[offset], value);
+}
+
+static int gpio_fwd_get(struct gpio_chip *chip, unsigned int offset)
+{
+	struct gpiochip_fwd *fwd = gpiochip_get_data(chip);
+
+	return gpiod_get_value(fwd->descs[offset]);
+}
+
+static int gpio_fwd_get_multiple(struct gpio_chip *chip, unsigned long *mask,
+				 unsigned long *bits)
+{
+	struct gpiochip_fwd *fwd = gpiochip_get_data(chip);
+	unsigned long *values, flags = 0;
+	struct gpio_desc **descs;
+	unsigned int i, j = 0;
+	int error;
+
+	if (chip->can_sleep)
+		mutex_lock(&fwd->mlock);
+	else
+		spin_lock_irqsave(&fwd->slock, flags);
+
+	/* Both values bitmap and desc pointers are stored in tmp[] */
+	values = &fwd->tmp[0];
+	descs = (void *)&fwd->tmp[BITS_TO_LONGS(fwd->chip.ngpio)];
+
+	bitmap_clear(values, 0, fwd->chip.ngpio);
+	for_each_set_bit(i, mask, fwd->chip.ngpio)
+		descs[j++] = fwd->descs[i];
+
+	error = gpiod_get_array_value(j, descs, NULL, values);
+	if (!error) {
+		j = 0;
+		for_each_set_bit(i, mask, fwd->chip.ngpio)
+			__assign_bit(i, bits, test_bit(j++, values));
+	}
+
+	if (chip->can_sleep)
+		mutex_unlock(&fwd->mlock);
+	else
+		spin_unlock_irqrestore(&fwd->slock, flags);
+
+	return error;
+}
+
+static void gpio_fwd_set(struct gpio_chip *chip, unsigned int offset, int value)
+{
+	struct gpiochip_fwd *fwd = gpiochip_get_data(chip);
+
+	gpiod_set_value(fwd->descs[offset], value);
+}
+
+static void gpio_fwd_set_multiple(struct gpio_chip *chip, unsigned long *mask,
+				  unsigned long *bits)
+{
+	struct gpiochip_fwd *fwd = gpiochip_get_data(chip);
+	unsigned long *values, flags = 0;
+	struct gpio_desc **descs;
+	unsigned int i, j = 0;
+
+	if (chip->can_sleep)
+		mutex_lock(&fwd->mlock);
+	else
+		spin_lock_irqsave(&fwd->slock, flags);
+
+	/* Both values bitmap and desc pointers are stored in tmp[] */
+	values = &fwd->tmp[0];
+	descs = (void *)&fwd->tmp[BITS_TO_LONGS(fwd->chip.ngpio)];
+
+	for_each_set_bit(i, mask, fwd->chip.ngpio) {
+		__assign_bit(j, values, test_bit(i, bits));
+		descs[j++] = fwd->descs[i];
+	}
+
+	gpiod_set_array_value(j, descs, NULL, values);
+
+	if (chip->can_sleep)
+		mutex_unlock(&fwd->mlock);
+	else
+		spin_unlock_irqrestore(&fwd->slock, flags);
+}
+
+static int gpio_fwd_set_config(struct gpio_chip *chip, unsigned int offset,
+			       unsigned long config)
+{
+	struct gpiochip_fwd *fwd = gpiochip_get_data(chip);
+
+	return gpiod_set_config(fwd->descs[offset], config);
+}
+
+/**
+ * gpiochip_fwd_create() - Create a new GPIO forwarder
+ * @dev: Parent device pointer
+ * @ngpios: Number of GPIOs in the forwarder.
+ * @descs: Array containing the GPIO descriptors to forward to.
+ *         This array must contain @ngpios entries, and must not be deallocated
+ *         before the forwarder has been destroyed again.
+ *
+ * This function creates a new gpiochip, which forwards all GPIO operations to
+ * the passed GPIO descriptors.
+ *
+ * Return: An opaque object pointer, or an ERR_PTR()-encoded negative error
+ *         code on failure.
+ */
+static struct gpiochip_fwd *gpiochip_fwd_create(struct device *dev,
+						unsigned int ngpios,
+						struct gpio_desc *descs[])
+{
+	const char *label = dev_name(dev);
+	struct gpiochip_fwd *fwd;
+	struct gpio_chip *chip;
+	unsigned int i;
+	int error;
+
+	fwd = devm_kzalloc(dev, struct_size(fwd, tmp,
+			   BITS_TO_LONGS(ngpios) + ngpios), GFP_KERNEL);
+	if (!fwd)
+		return ERR_PTR(-ENOMEM);
+
+	chip = &fwd->chip;
+
+	/*
+	 * If any of the GPIO lines are sleeping, then the entire forwarder
+	 * will be sleeping.
+	 * If any of the chips support .set_config(), then the forwarder will
+	 * support setting configs.
+	 */
+	for (i = 0; i < ngpios; i++) {
+		struct gpio_chip *parent = gpiod_to_chip(descs[i]);
+
+		dev_dbg(dev, "%u => gpio-%d\n", i, desc_to_gpio(descs[i]));
+
+		if (gpiod_cansleep(descs[i]))
+			chip->can_sleep = true;
+		if (parent && parent->set_config)
+			chip->set_config = gpio_fwd_set_config;
+	}
+
+	chip->label = label;
+	chip->parent = dev;
+	chip->owner = THIS_MODULE;
+	chip->get_direction = gpio_fwd_get_direction;
+	chip->direction_input = gpio_fwd_direction_input;
+	chip->direction_output = gpio_fwd_direction_output;
+	chip->get = gpio_fwd_get;
+	chip->get_multiple = gpio_fwd_get_multiple;
+	chip->set = gpio_fwd_set;
+	chip->set_multiple = gpio_fwd_set_multiple;
+	chip->base = -1;
+	chip->ngpio = ngpios;
+	fwd->descs = descs;
+
+	if (chip->can_sleep)
+		mutex_init(&fwd->mlock);
+	else
+		spin_lock_init(&fwd->slock);
+
+	error = devm_gpiochip_add_data(dev, chip, fwd);
+	if (error)
+		return ERR_PTR(error);
+
+	return fwd;
+}
+
+
+/*
+ *  GPIO Aggregator platform device
+ */
+
+static int gpio_aggregator_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct gpio_desc **descs;
+	struct gpiochip_fwd *fwd;
+	int i, n;
+
+	n = gpiod_count(dev, NULL);
+	if (n < 0)
+		return n;
+
+	descs = devm_kmalloc_array(dev, n, sizeof(*descs), GFP_KERNEL);
+	if (!descs)
+		return -ENOMEM;
+
+	for (i = 0; i < n; i++) {
+		descs[i] = devm_gpiod_get_index(dev, NULL, i, GPIOD_ASIS);
+		if (IS_ERR(descs[i]))
+			return PTR_ERR(descs[i]);
+	}
+
+	fwd = gpiochip_fwd_create(dev, n, descs);
+	if (IS_ERR(fwd))
+		return PTR_ERR(fwd);
+
+	platform_set_drvdata(pdev, fwd);
+	return 0;
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id gpio_aggregator_dt_ids[] = {
+	/*
+	 * Add GPIO-operated devices controlled from userspace below,
+	 * or use "driver_override" in sysfs
+	 */
+	{},
+};
+MODULE_DEVICE_TABLE(of, gpio_aggregator_dt_ids);
+#endif
+
+static struct platform_driver gpio_aggregator_driver = {
+	.probe = gpio_aggregator_probe,
+	.driver = {
+		.name = DRV_NAME,
+		.groups = gpio_aggregator_groups,
+		.of_match_table = of_match_ptr(gpio_aggregator_dt_ids),
+	},
+};
+
+static int __init gpio_aggregator_init(void)
+{
+	return platform_driver_register(&gpio_aggregator_driver);
+}
+module_init(gpio_aggregator_init);
+
+static void __exit gpio_aggregator_exit(void)
+{
+	gpio_aggregator_remove_all();
+	platform_driver_unregister(&gpio_aggregator_driver);
+}
+module_exit(gpio_aggregator_exit);
+
+MODULE_AUTHOR("Geert Uytterhoeven <geert+renesas@glider.be>");
+MODULE_DESCRIPTION("GPIO Aggregator");
+MODULE_LICENSE("GPL v2");
-- 
2.17.1


WARNING: multiple messages have this Message-ID (diff)
From: Geert Uytterhoeven <geert+renesas@glider.be>
To: Linus Walleij <linus.walleij@linaro.org>,
	Bartosz Golaszewski <bgolaszewski@baylibre.com>,
	Jonathan Corbet <corbet@lwn.net>,
	Harish Jenny K N <harish_kandiga@mentor.com>,
	Eugeniu Rosca <erosca@de.adit-jv.com>
Cc: Mark Rutland <mark.rutland@arm.com>,
	Peter Maydell <peter.maydell@linaro.org>,
	qemu-devel@nongnu.org,
	Geert Uytterhoeven <geert+renesas@glider.be>,
	linux-doc@vger.kernel.org, Marc Zyngier <marc.zyngier@arm.com>,
	Magnus Damm <magnus.damm@gmail.com>,
	Christoffer Dall <christoffer.dall@arm.com>,
	linux-kernel@vger.kernel.org, linux-renesas-soc@vger.kernel.org,
	linux-gpio@vger.kernel.org, Rob Herring <robh+dt@kernel.org>,
	Alexander Graf <graf@amazon.com>,
	Paolo Bonzini <pbonzini@redhat.com>,
	Phil Reid <preid@electromag.com.au>
Subject: [PATCH v6 6/8] gpio: Add GPIO Aggregator
Date: Tue, 24 Mar 2020 14:56:51 +0100	[thread overview]
Message-ID: <20200324135653.6676-6-geert+renesas@glider.be> (raw)
In-Reply-To: <20200324135653.6676-1-geert+renesas@glider.be>

GPIO controllers are exported to userspace using /dev/gpiochip*
character devices.  Access control to these devices is provided by
standard UNIX file system permissions, on an all-or-nothing basis:
either a GPIO controller is accessible for a user, or it is not.
Currently no mechanism exists to control access to individual GPIOs.

Hence add a GPIO driver to aggregate existing GPIOs, and expose them as
a new gpiochip.

This supports the following use cases:
  - Aggregating GPIOs using Sysfs
    This is useful for implementing access control, and assigning a set
    of GPIOs to a specific user or virtual machine.
  - Generic GPIO Driver
    This is useful for industrial control, where it can provide
    userspace access to a simple GPIO-operated device described in DT,
    cfr. e.g. spidev for SPI-operated devices.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Tested-by: Eugeniu Rosca <erosca@de.adit-jv.com>
---
v6:
  - Use gpiod_to_chip() instead of open-coding,
  - Drop debug print of gpio_desc.label, as it usually just points to
    the GPIO Aggregator itself,
  - Drop no longer needed #include "gpiolib.h",
  - Fix missing offset translation in gpio_fwd_set_config(),
  - Use GPIO_LOOKUP_IDX() to populate struct gpiod_lookup,

v5:
  - Add Reviewed-by, Tested-by,

v4:
  - Remove unused assignment to n in isrange(),
  - Check correct pointer after aggr->lookups->dev_id allocation,
  - Preinitialize flags to 0 in gpio_fwd_[gs]et_multiple() to avoid
    may-be-used-uninitialized warning,
  - Drop controversial GPIO repeater,
  - Update for gpiod_lookup.chip_label rename,
  - Use %pe to format error pointers,
  - Use U16_MAX instead of (u16)-1,
  - Correct comment indentation,
  - Use skip_spaces() helper,
  - Rename a and b to first_index resp. last_index,
  - Add comment to tmp[] use,
  - Improve Kconfig help text,
  - Include <linux/gpio/consumer.h> for gpiod_[gs]et_*(),
  - Drop unneeded valid_mask handling,
  - Add comment about sleeping and .set_config() support,

v3:
  - Absorb GPIO forwarder,
  - Integrate GPIO Repeater and Generic GPIO driver functionality,
  - Use the aggregator parameters to create a GPIO lookup table instead
    of an array of GPIO descriptors, which allows to simplify the code:
      1. This removes the need for calling gpio_name_to_desc(),
         gpiochip_find(), gpiochip_get_desc(), and gpiod_request(),
      2. This allows the platform device to always use
         devm_gpiod_get_index(), regardless of the origin of the GPIOs,
  - Move parameter parsing from platform device probe to sysfs attribute
    store, removing the need for platform data passing,
  - Use more devm_*() functions to simplify cleanup,
  - Add pr_fmt(),
  - General refactoring,

v2:
  - Add missing initialization of i in gpio_virt_agg_probe(),
  - Update for removed .need_valid_mask field and changed
    .init_valid_mask() signature,
  - Drop "virtual", rename to gpio-aggregator,
  - Drop bogus FIXME related to gpiod_set_transitory() expectations,
  - Use new GPIO Forwarder Helper,
  - Lift limit on the maximum number of GPIOs,
  - Improve parsing:
      - add support for specifying GPIOs by line name,
      - add support for specifying GPIO chips by ID,
      - add support for GPIO offset ranges,
      - names and offset specifiers must be separated by whitespace,
      - GPIO offsets must separated by spaces,
  - Use str_has_prefix() and kstrtouint().
---
 drivers/gpio/Kconfig           |  12 +
 drivers/gpio/Makefile          |   1 +
 drivers/gpio/gpio-aggregator.c | 568 +++++++++++++++++++++++++++++++++
 3 files changed, 581 insertions(+)
 create mode 100644 drivers/gpio/gpio-aggregator.c

diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 6234ccc90e7eb4a1..6ddc7353a46afdf6 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -1541,6 +1541,18 @@ config GPIO_VIPERBOARD
 
 endmenu
 
+config GPIO_AGGREGATOR
+	tristate "GPIO Aggregator"
+	help
+	  Say yes here to enable the GPIO Aggregator, which provides a way to
+	  aggregate existing GPIO lines into a new virtual GPIO chip.
+	  This can serve the following purposes:
+	    - Assign permissions for a collection of GPIO lines to a user,
+	    - Export a collection of GPIO lines to a virtual machine,
+	    - Provide a generic driver for a GPIO-operated device in an
+	      industrial control context, to be operated from userspace using
+	      the GPIO chardev interface.
+
 config GPIO_MOCKUP
 	tristate "GPIO Testing Driver"
 	select IRQ_SIM
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index b2cfc21a97f3e52b..65bf3940e33cf734 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -25,6 +25,7 @@ obj-$(CONFIG_GPIO_74XX_MMIO)		+= gpio-74xx-mmio.o
 obj-$(CONFIG_GPIO_ADNP)			+= gpio-adnp.o
 obj-$(CONFIG_GPIO_ADP5520)		+= gpio-adp5520.o
 obj-$(CONFIG_GPIO_ADP5588)		+= gpio-adp5588.o
+obj-$(CONFIG_GPIO_AGGREGATOR)		+= gpio-aggregator.o
 obj-$(CONFIG_GPIO_ALTERA_A10SR)		+= gpio-altera-a10sr.o
 obj-$(CONFIG_GPIO_ALTERA)  		+= gpio-altera.o
 obj-$(CONFIG_GPIO_AMD8111)		+= gpio-amd8111.o
diff --git a/drivers/gpio/gpio-aggregator.c b/drivers/gpio/gpio-aggregator.c
new file mode 100644
index 0000000000000000..9b0adbdddbfccb30
--- /dev/null
+++ b/drivers/gpio/gpio-aggregator.c
@@ -0,0 +1,568 @@
+// SPDX-License-Identifier: GPL-2.0-only
+//
+// GPIO Aggregator
+//
+// Copyright (C) 2019-2020 Glider bv
+
+#define DRV_NAME       "gpio-aggregator"
+#define pr_fmt(fmt)	DRV_NAME ": " fmt
+
+#include <linux/bitmap.h>
+#include <linux/bitops.h>
+#include <linux/ctype.h>
+#include <linux/gpio/consumer.h>
+#include <linux/gpio/driver.h>
+#include <linux/gpio/machine.h>
+#include <linux/idr.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/overflow.h>
+#include <linux/platform_device.h>
+#include <linux/spinlock.h>
+#include <linux/string.h>
+
+
+/*
+ * GPIO Aggregator sysfs interface
+ */
+
+struct gpio_aggregator {
+	struct gpiod_lookup_table *lookups;
+	struct platform_device *pdev;
+	char args[];
+};
+
+static DEFINE_MUTEX(gpio_aggregator_lock);	/* protects idr */
+static DEFINE_IDR(gpio_aggregator_idr);
+
+static char *get_arg(char **args)
+{
+	char *start = *args, *end;
+
+	start = skip_spaces(start);
+	if (!*start)
+		return NULL;
+
+	if (*start == '"') {
+		/* Quoted arg */
+		end = strchr(++start, '"');
+		if (!end)
+			return ERR_PTR(-EINVAL);
+	} else {
+		/* Unquoted arg */
+		for (end = start; *end && !isspace(*end); end++) ;
+	}
+
+	if (*end)
+		*end++ = '\0';
+
+	*args = end;
+	return start;
+}
+
+static bool isrange(const char *s)
+{
+	size_t n;
+
+	if (IS_ERR_OR_NULL(s))
+		return false;
+
+	while (1) {
+		n = strspn(s, "0123456789");
+		if (!n)
+			return false;
+
+		s += n;
+
+		switch (*s++) {
+		case '\0':
+			return true;
+
+		case '-':
+		case ',':
+			break;
+
+		default:
+			return false;
+		}
+	}
+}
+
+static int aggr_add_gpio(struct gpio_aggregator *aggr, const char *key,
+			 int hwnum, unsigned int *n)
+{
+	struct gpiod_lookup_table *lookups;
+
+	lookups = krealloc(aggr->lookups, struct_size(lookups, table, *n + 2),
+			   GFP_KERNEL);
+	if (!lookups)
+		return -ENOMEM;
+
+	lookups->table[*n] =
+		(struct gpiod_lookup)GPIO_LOOKUP_IDX(key, hwnum, NULL, *n, 0);
+
+	(*n)++;
+	memset(&lookups->table[*n], 0, sizeof(lookups->table[*n]));
+
+	aggr->lookups = lookups;
+	return 0;
+}
+
+static int aggr_parse(struct gpio_aggregator *aggr)
+{
+	unsigned int first_index, last_index, i, n = 0;
+	char *name, *offsets, *first, *last, *next;
+	char *args = aggr->args;
+	int error;
+
+	for (name = get_arg(&args), offsets = get_arg(&args); name;
+	     offsets = get_arg(&args)) {
+		if (IS_ERR(name)) {
+			pr_err("Cannot get GPIO specifier: %pe\n", name);
+			return PTR_ERR(name);
+		}
+
+		if (!isrange(offsets)) {
+			/* Named GPIO line */
+			error = aggr_add_gpio(aggr, name, U16_MAX, &n);
+			if (error)
+				return error;
+
+			name = offsets;
+			continue;
+		}
+
+		/* GPIO chip + offset(s) */
+		for (first = offsets; *first; first = next) {
+			next = strchrnul(first, ',');
+			if (*next)
+				*next++ = '\0';
+
+			last = strchr(first, '-');
+			if (last)
+				*last++ = '\0';
+
+			if (kstrtouint(first, 10, &first_index)) {
+				pr_err("Cannot parse GPIO index %s\n", first);
+				return -EINVAL;
+			}
+
+			if (!last) {
+				last_index = first_index;
+			} else if (kstrtouint(last, 10, &last_index)) {
+				pr_err("Cannot parse GPIO index %s\n", last);
+				return -EINVAL;
+			}
+
+			for (i = first_index; i <= last_index; i++) {
+				error = aggr_add_gpio(aggr, name, i, &n);
+				if (error)
+					return error;
+			}
+		}
+
+		name = get_arg(&args);
+	}
+
+	if (!n) {
+		pr_err("No GPIOs specified\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static ssize_t new_device_store(struct device_driver *driver, const char *buf,
+				size_t count)
+{
+	struct gpio_aggregator *aggr;
+	struct platform_device *pdev;
+	int res, id;
+
+	/* kernfs guarantees string termination, so count + 1 is safe */
+	aggr = kzalloc(sizeof(*aggr) + count + 1, GFP_KERNEL);
+	if (!aggr)
+		return -ENOMEM;
+
+	memcpy(aggr->args, buf, count + 1);
+
+	aggr->lookups = kzalloc(struct_size(aggr->lookups, table, 1),
+				GFP_KERNEL);
+	if (!aggr->lookups) {
+		res = -ENOMEM;
+		goto free_ga;
+	}
+
+	mutex_lock(&gpio_aggregator_lock);
+	id = idr_alloc(&gpio_aggregator_idr, aggr, 0, 0, GFP_KERNEL);
+	mutex_unlock(&gpio_aggregator_lock);
+
+	if (id < 0) {
+		res = id;
+		goto free_table;
+	}
+
+	aggr->lookups->dev_id = kasprintf(GFP_KERNEL, "%s.%d", DRV_NAME, id);
+	if (!aggr->lookups->dev_id) {
+		res = -ENOMEM;
+		goto remove_idr;
+	}
+
+	res = aggr_parse(aggr);
+	if (res)
+		goto free_dev_id;
+
+	gpiod_add_lookup_table(aggr->lookups);
+
+	pdev = platform_device_register_simple(DRV_NAME, id, NULL, 0);
+	if (IS_ERR(pdev)) {
+		res = PTR_ERR(pdev);
+		goto remove_table;
+	}
+
+	aggr->pdev = pdev;
+	return count;
+
+remove_table:
+	gpiod_remove_lookup_table(aggr->lookups);
+free_dev_id:
+	kfree(aggr->lookups->dev_id);
+remove_idr:
+	mutex_lock(&gpio_aggregator_lock);
+	idr_remove(&gpio_aggregator_idr, id);
+	mutex_unlock(&gpio_aggregator_lock);
+free_table:
+	kfree(aggr->lookups);
+free_ga:
+	kfree(aggr);
+	return res;
+}
+
+static DRIVER_ATTR_WO(new_device);
+
+static void gpio_aggregator_free(struct gpio_aggregator *aggr)
+{
+	platform_device_unregister(aggr->pdev);
+	gpiod_remove_lookup_table(aggr->lookups);
+	kfree(aggr->lookups->dev_id);
+	kfree(aggr->lookups);
+	kfree(aggr);
+}
+
+static ssize_t delete_device_store(struct device_driver *driver,
+				   const char *buf, size_t count)
+{
+	struct gpio_aggregator *aggr;
+	unsigned int id;
+	int error;
+
+	if (!str_has_prefix(buf, DRV_NAME "."))
+		return -EINVAL;
+
+	error = kstrtouint(buf + strlen(DRV_NAME "."), 10, &id);
+	if (error)
+		return error;
+
+	mutex_lock(&gpio_aggregator_lock);
+	aggr = idr_remove(&gpio_aggregator_idr, id);
+	mutex_unlock(&gpio_aggregator_lock);
+	if (!aggr)
+		return -ENOENT;
+
+	gpio_aggregator_free(aggr);
+	return count;
+}
+static DRIVER_ATTR_WO(delete_device);
+
+static struct attribute *gpio_aggregator_attrs[] = {
+	&driver_attr_new_device.attr,
+	&driver_attr_delete_device.attr,
+	NULL,
+};
+ATTRIBUTE_GROUPS(gpio_aggregator);
+
+static int __exit gpio_aggregator_idr_remove(int id, void *p, void *data)
+{
+	gpio_aggregator_free(p);
+	return 0;
+}
+
+static void __exit gpio_aggregator_remove_all(void)
+{
+	mutex_lock(&gpio_aggregator_lock);
+	idr_for_each(&gpio_aggregator_idr, gpio_aggregator_idr_remove, NULL);
+	idr_destroy(&gpio_aggregator_idr);
+	mutex_unlock(&gpio_aggregator_lock);
+}
+
+
+/*
+ *  GPIO Forwarder
+ */
+
+struct gpiochip_fwd {
+	struct gpio_chip chip;
+	struct gpio_desc **descs;
+	union {
+		struct mutex mlock;	/* protects tmp[] if can_sleep */
+		spinlock_t slock;	/* protects tmp[] if !can_sleep */
+	};
+	unsigned long tmp[];		/* values and descs for multiple ops */
+};
+
+static int gpio_fwd_get_direction(struct gpio_chip *chip, unsigned int offset)
+{
+	struct gpiochip_fwd *fwd = gpiochip_get_data(chip);
+
+	return gpiod_get_direction(fwd->descs[offset]);
+}
+
+static int gpio_fwd_direction_input(struct gpio_chip *chip, unsigned int offset)
+{
+	struct gpiochip_fwd *fwd = gpiochip_get_data(chip);
+
+	return gpiod_direction_input(fwd->descs[offset]);
+}
+
+static int gpio_fwd_direction_output(struct gpio_chip *chip,
+				     unsigned int offset, int value)
+{
+	struct gpiochip_fwd *fwd = gpiochip_get_data(chip);
+
+	return gpiod_direction_output(fwd->descs[offset], value);
+}
+
+static int gpio_fwd_get(struct gpio_chip *chip, unsigned int offset)
+{
+	struct gpiochip_fwd *fwd = gpiochip_get_data(chip);
+
+	return gpiod_get_value(fwd->descs[offset]);
+}
+
+static int gpio_fwd_get_multiple(struct gpio_chip *chip, unsigned long *mask,
+				 unsigned long *bits)
+{
+	struct gpiochip_fwd *fwd = gpiochip_get_data(chip);
+	unsigned long *values, flags = 0;
+	struct gpio_desc **descs;
+	unsigned int i, j = 0;
+	int error;
+
+	if (chip->can_sleep)
+		mutex_lock(&fwd->mlock);
+	else
+		spin_lock_irqsave(&fwd->slock, flags);
+
+	/* Both values bitmap and desc pointers are stored in tmp[] */
+	values = &fwd->tmp[0];
+	descs = (void *)&fwd->tmp[BITS_TO_LONGS(fwd->chip.ngpio)];
+
+	bitmap_clear(values, 0, fwd->chip.ngpio);
+	for_each_set_bit(i, mask, fwd->chip.ngpio)
+		descs[j++] = fwd->descs[i];
+
+	error = gpiod_get_array_value(j, descs, NULL, values);
+	if (!error) {
+		j = 0;
+		for_each_set_bit(i, mask, fwd->chip.ngpio)
+			__assign_bit(i, bits, test_bit(j++, values));
+	}
+
+	if (chip->can_sleep)
+		mutex_unlock(&fwd->mlock);
+	else
+		spin_unlock_irqrestore(&fwd->slock, flags);
+
+	return error;
+}
+
+static void gpio_fwd_set(struct gpio_chip *chip, unsigned int offset, int value)
+{
+	struct gpiochip_fwd *fwd = gpiochip_get_data(chip);
+
+	gpiod_set_value(fwd->descs[offset], value);
+}
+
+static void gpio_fwd_set_multiple(struct gpio_chip *chip, unsigned long *mask,
+				  unsigned long *bits)
+{
+	struct gpiochip_fwd *fwd = gpiochip_get_data(chip);
+	unsigned long *values, flags = 0;
+	struct gpio_desc **descs;
+	unsigned int i, j = 0;
+
+	if (chip->can_sleep)
+		mutex_lock(&fwd->mlock);
+	else
+		spin_lock_irqsave(&fwd->slock, flags);
+
+	/* Both values bitmap and desc pointers are stored in tmp[] */
+	values = &fwd->tmp[0];
+	descs = (void *)&fwd->tmp[BITS_TO_LONGS(fwd->chip.ngpio)];
+
+	for_each_set_bit(i, mask, fwd->chip.ngpio) {
+		__assign_bit(j, values, test_bit(i, bits));
+		descs[j++] = fwd->descs[i];
+	}
+
+	gpiod_set_array_value(j, descs, NULL, values);
+
+	if (chip->can_sleep)
+		mutex_unlock(&fwd->mlock);
+	else
+		spin_unlock_irqrestore(&fwd->slock, flags);
+}
+
+static int gpio_fwd_set_config(struct gpio_chip *chip, unsigned int offset,
+			       unsigned long config)
+{
+	struct gpiochip_fwd *fwd = gpiochip_get_data(chip);
+
+	return gpiod_set_config(fwd->descs[offset], config);
+}
+
+/**
+ * gpiochip_fwd_create() - Create a new GPIO forwarder
+ * @dev: Parent device pointer
+ * @ngpios: Number of GPIOs in the forwarder.
+ * @descs: Array containing the GPIO descriptors to forward to.
+ *         This array must contain @ngpios entries, and must not be deallocated
+ *         before the forwarder has been destroyed again.
+ *
+ * This function creates a new gpiochip, which forwards all GPIO operations to
+ * the passed GPIO descriptors.
+ *
+ * Return: An opaque object pointer, or an ERR_PTR()-encoded negative error
+ *         code on failure.
+ */
+static struct gpiochip_fwd *gpiochip_fwd_create(struct device *dev,
+						unsigned int ngpios,
+						struct gpio_desc *descs[])
+{
+	const char *label = dev_name(dev);
+	struct gpiochip_fwd *fwd;
+	struct gpio_chip *chip;
+	unsigned int i;
+	int error;
+
+	fwd = devm_kzalloc(dev, struct_size(fwd, tmp,
+			   BITS_TO_LONGS(ngpios) + ngpios), GFP_KERNEL);
+	if (!fwd)
+		return ERR_PTR(-ENOMEM);
+
+	chip = &fwd->chip;
+
+	/*
+	 * If any of the GPIO lines are sleeping, then the entire forwarder
+	 * will be sleeping.
+	 * If any of the chips support .set_config(), then the forwarder will
+	 * support setting configs.
+	 */
+	for (i = 0; i < ngpios; i++) {
+		struct gpio_chip *parent = gpiod_to_chip(descs[i]);
+
+		dev_dbg(dev, "%u => gpio-%d\n", i, desc_to_gpio(descs[i]));
+
+		if (gpiod_cansleep(descs[i]))
+			chip->can_sleep = true;
+		if (parent && parent->set_config)
+			chip->set_config = gpio_fwd_set_config;
+	}
+
+	chip->label = label;
+	chip->parent = dev;
+	chip->owner = THIS_MODULE;
+	chip->get_direction = gpio_fwd_get_direction;
+	chip->direction_input = gpio_fwd_direction_input;
+	chip->direction_output = gpio_fwd_direction_output;
+	chip->get = gpio_fwd_get;
+	chip->get_multiple = gpio_fwd_get_multiple;
+	chip->set = gpio_fwd_set;
+	chip->set_multiple = gpio_fwd_set_multiple;
+	chip->base = -1;
+	chip->ngpio = ngpios;
+	fwd->descs = descs;
+
+	if (chip->can_sleep)
+		mutex_init(&fwd->mlock);
+	else
+		spin_lock_init(&fwd->slock);
+
+	error = devm_gpiochip_add_data(dev, chip, fwd);
+	if (error)
+		return ERR_PTR(error);
+
+	return fwd;
+}
+
+
+/*
+ *  GPIO Aggregator platform device
+ */
+
+static int gpio_aggregator_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct gpio_desc **descs;
+	struct gpiochip_fwd *fwd;
+	int i, n;
+
+	n = gpiod_count(dev, NULL);
+	if (n < 0)
+		return n;
+
+	descs = devm_kmalloc_array(dev, n, sizeof(*descs), GFP_KERNEL);
+	if (!descs)
+		return -ENOMEM;
+
+	for (i = 0; i < n; i++) {
+		descs[i] = devm_gpiod_get_index(dev, NULL, i, GPIOD_ASIS);
+		if (IS_ERR(descs[i]))
+			return PTR_ERR(descs[i]);
+	}
+
+	fwd = gpiochip_fwd_create(dev, n, descs);
+	if (IS_ERR(fwd))
+		return PTR_ERR(fwd);
+
+	platform_set_drvdata(pdev, fwd);
+	return 0;
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id gpio_aggregator_dt_ids[] = {
+	/*
+	 * Add GPIO-operated devices controlled from userspace below,
+	 * or use "driver_override" in sysfs
+	 */
+	{},
+};
+MODULE_DEVICE_TABLE(of, gpio_aggregator_dt_ids);
+#endif
+
+static struct platform_driver gpio_aggregator_driver = {
+	.probe = gpio_aggregator_probe,
+	.driver = {
+		.name = DRV_NAME,
+		.groups = gpio_aggregator_groups,
+		.of_match_table = of_match_ptr(gpio_aggregator_dt_ids),
+	},
+};
+
+static int __init gpio_aggregator_init(void)
+{
+	return platform_driver_register(&gpio_aggregator_driver);
+}
+module_init(gpio_aggregator_init);
+
+static void __exit gpio_aggregator_exit(void)
+{
+	gpio_aggregator_remove_all();
+	platform_driver_unregister(&gpio_aggregator_driver);
+}
+module_exit(gpio_aggregator_exit);
+
+MODULE_AUTHOR("Geert Uytterhoeven <geert+renesas@glider.be>");
+MODULE_DESCRIPTION("GPIO Aggregator");
+MODULE_LICENSE("GPL v2");
-- 
2.17.1



  parent reply	other threads:[~2020-03-24 13:57 UTC|newest]

Thread overview: 41+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-03-24 13:53 [PATCH v6 0/8] gpio: Add GPIO Aggregator Geert Uytterhoeven
2020-03-24 13:53 ` Geert Uytterhoeven
2020-03-24 13:56 ` [PATCH v6 1/8] ARM: integrator: impd1: Use GPIO_LOOKUP() helper macro Geert Uytterhoeven
2020-03-24 13:56   ` Geert Uytterhoeven
2020-03-24 13:56   ` Geert Uytterhoeven
2020-03-24 13:56   ` [PATCH v6 2/8] i2c: i801: " Geert Uytterhoeven
2020-03-24 13:56     ` Geert Uytterhoeven
2020-03-25  9:14     ` Jean Delvare
2020-03-25  9:14       ` Jean Delvare
2020-03-25  9:14       ` Jean Delvare
2020-04-15 10:57     ` Wolfram Sang
2020-04-15 10:57       ` Wolfram Sang
2020-03-24 13:56   ` [PATCH v6 3/8] mfd: sm501: Use GPIO_LOOKUP_IDX() " Geert Uytterhoeven
2020-03-24 13:56     ` Geert Uytterhoeven
2020-04-15  9:25     ` Lee Jones
2020-04-15  9:25       ` Lee Jones
2020-03-24 13:56   ` [PATCH v6 4/8] gpiolib: Add support for GPIO lookup by line name Geert Uytterhoeven
2020-03-24 13:56     ` Geert Uytterhoeven
2020-03-26 21:18     ` Linus Walleij
2020-03-26 21:18       ` Linus Walleij
2020-05-11 10:18       ` Geert Uytterhoeven
2020-05-11 10:18         ` Geert Uytterhoeven
2020-03-24 13:56   ` [PATCH v6 5/8] gpiolib: Introduce gpiod_set_config() Geert Uytterhoeven
2020-03-24 13:56     ` Geert Uytterhoeven
2020-03-26 21:26     ` Linus Walleij
2020-03-26 21:26       ` Linus Walleij
2020-03-27  8:45       ` Geert Uytterhoeven
2020-03-27  8:45         ` Geert Uytterhoeven
2020-03-27 21:33         ` Linus Walleij
2020-03-27 21:33           ` Linus Walleij
2020-03-27 21:37     ` Linus Walleij
2020-03-27 21:37       ` Linus Walleij
2020-03-24 13:56   ` Geert Uytterhoeven [this message]
2020-03-24 13:56     ` [PATCH v6 6/8] gpio: Add GPIO Aggregator Geert Uytterhoeven
2020-03-24 13:56   ` [PATCH v6 7/8] docs: gpio: Add GPIO Aggregator documentation Geert Uytterhoeven
2020-03-24 13:56     ` Geert Uytterhoeven
2020-03-24 13:56   ` [PATCH v6 8/8] MAINTAINERS: Add GPIO Aggregator section Geert Uytterhoeven
2020-03-24 13:56     ` Geert Uytterhoeven
2020-03-26 21:07   ` [PATCH v6 1/8] ARM: integrator: impd1: Use GPIO_LOOKUP() helper macro Linus Walleij
2020-03-26 21:07     ` Linus Walleij
2020-03-26 21:07     ` Linus Walleij

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200324135653.6676-6-geert+renesas@glider.be \
    --to=geert+renesas@glider.be \
    --cc=bgolaszewski@baylibre.com \
    --cc=christoffer.dall@arm.com \
    --cc=corbet@lwn.net \
    --cc=erosca@de.adit-jv.com \
    --cc=graf@amazon.com \
    --cc=harish_kandiga@mentor.com \
    --cc=linus.walleij@linaro.org \
    --cc=linux-doc@vger.kernel.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=magnus.damm@gmail.com \
    --cc=marc.zyngier@arm.com \
    --cc=mark.rutland@arm.com \
    --cc=pbonzini@redhat.com \
    --cc=peter.maydell@linaro.org \
    --cc=preid@electromag.com.au \
    --cc=qemu-devel@nongnu.org \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.