[PATCH for-5.0 3/3] cmd646-ide: use qdev gpio rather than qemu_allocate_irqs()

[Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>]

This prevents the memory from qemu_allocate_irqs() from being leaked which
can in some cases be spotted by Coverity (CID 1421984).

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
---
 hw/ide/cmd646.c | 9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)

diff --git a/hw/ide/cmd646.c b/hw/ide/cmd646.c
index 699f25824d..c254631485 100644
--- a/hw/ide/cmd646.c
+++ b/hw/ide/cmd646.c
@@ -249,8 +249,8 @@ static void cmd646_pci_config_write(PCIDevice *d, uint32_t addr, uint32_t val,
 static void pci_cmd646_ide_realize(PCIDevice *dev, Error **errp)
 {
     PCIIDEState *d = PCI_IDE(dev);
+    DeviceState *ds = DEVICE(dev);
     uint8_t *pci_conf = dev->config;
-    qemu_irq *irq;
     int i;
 
     pci_conf[PCI_CLASS_PROG] = 0x8f;
@@ -291,16 +291,15 @@ static void pci_cmd646_ide_realize(PCIDevice *dev, Error **errp)
     /* TODO: RST# value should be 0 */
     pci_conf[PCI_INTERRUPT_PIN] = 0x01; // interrupt on pin 1
 
-    irq = qemu_allocate_irqs(cmd646_set_irq, d, 2);
+    qdev_init_gpio_in(ds, cmd646_set_irq, 2);
     for (i = 0; i < 2; i++) {
-        ide_bus_new(&d->bus[i], sizeof(d->bus[i]), DEVICE(dev), i, 2);
-        ide_init2(&d->bus[i], irq[i]);
+        ide_bus_new(&d->bus[i], sizeof(d->bus[i]), ds, i, 2);
+        ide_init2(&d->bus[i], qdev_get_gpio_in(ds, i));
 
         bmdma_init(&d->bus[i], &d->bmdma[i], d);
         d->bmdma[i].bus = &d->bus[i];
         ide_register_restart_cb(&d->bus[i]);
     }
-    g_free(irq);
 }
 
 static void pci_cmd646_ide_exitfn(PCIDevice *dev)
-- 
2.20.1