All of lore.kernel.org
 help / color / mirror / Atom feed
From: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
To: alsa-devel@alsa-project.org
Cc: tiwai@suse.de, broonie@kernel.org,
	Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Subject: [PATCH v2 02/11] ASoC: SOF: Intel: add SoundWire configuration interface
Date: Wed, 25 Mar 2020 16:50:18 -0500	[thread overview]
Message-ID: <20200325215027.28716-3-pierre-louis.bossart@linux.intel.com> (raw)
In-Reply-To: <20200325215027.28716-1-pierre-louis.bossart@linux.intel.com>

Now that the SoundWire core supports the multi-step initialization,
call the relevant APIs.

The actual hardware enablement can be done in two places, ideally we'd
want to startup the SoundWire IP as soon as possible (while still
taking power rail dependencies into account)

However when suspend/resume is implemented, the DSP device will be
resumed first, and only when the DSP firmware is downloaded/booted
would the SoundWire child devices be resumed, so there are only
marginal benefits in starting the IP earlier for the first probe.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
---
 sound/soc/sof/intel/hda-loader.c |  13 ++++
 sound/soc/sof/intel/hda.c        | 120 +++++++++++++++++++++++++++++++
 sound/soc/sof/intel/hda.h        |  44 ++++++++++++
 3 files changed, 177 insertions(+)

diff --git a/sound/soc/sof/intel/hda-loader.c b/sound/soc/sof/intel/hda-loader.c
index 0633b76dab49..2ae94ea53122 100644
--- a/sound/soc/sof/intel/hda-loader.c
+++ b/sound/soc/sof/intel/hda-loader.c
@@ -399,6 +399,19 @@ int hda_dsp_pre_fw_run(struct snd_sof_dev *sdev)
 /* post fw run operations */
 int hda_dsp_post_fw_run(struct snd_sof_dev *sdev)
 {
+	int ret;
+
+	if (sdev->first_boot) {
+		ret = hda_sdw_startup(sdev);
+		if (ret < 0) {
+			dev_err(sdev->dev,
+				"error: could not startup SoundWire links\n");
+			return ret;
+		}
+	}
+
+	hda_sdw_int_enable(sdev, true);
+
 	/* re-enable clock gating and power gating */
 	return hda_dsp_ctrl_clock_power_gating(sdev, true);
 }
diff --git a/sound/soc/sof/intel/hda.c b/sound/soc/sof/intel/hda.c
index ee1edb53840c..c1fe94800da1 100644
--- a/sound/soc/sof/intel/hda.c
+++ b/sound/soc/sof/intel/hda.c
@@ -18,7 +18,9 @@
 #include <sound/hdaudio_ext.h>
 #include <sound/hda_register.h>
 
+#include <linux/acpi.h>
 #include <linux/module.h>
+#include <linux/soundwire/sdw_intel.h>
 #include <sound/intel-nhlt.h>
 #include <sound/sof.h>
 #include <sound/sof/xtensa.h>
@@ -34,6 +36,98 @@
 
 #define EXCEPT_MAX_HDR_SIZE	0x400
 
+#if IS_ENABLED(CONFIG_SND_SOC_SOF_INTEL_SOUNDWIRE)
+
+void hda_sdw_int_enable(struct snd_sof_dev *sdev, bool enable)
+{
+	sdw_intel_enable_irq(sdev->bar[HDA_DSP_BAR], enable);
+}
+
+static int hda_sdw_acpi_scan(struct snd_sof_dev *sdev)
+{
+	struct sof_intel_hda_dev *hdev;
+	acpi_handle handle;
+	int ret;
+
+	handle = ACPI_HANDLE(sdev->dev);
+
+	/* save ACPI info for the probe step */
+	hdev = sdev->pdata->hw_pdata;
+
+	ret = sdw_intel_acpi_scan(handle, &hdev->info);
+	if (ret < 0) {
+		dev_err(sdev->dev, "%s failed\n", __func__);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int hda_sdw_probe(struct snd_sof_dev *sdev)
+{
+	struct sof_intel_hda_dev *hdev;
+	struct sdw_intel_res res;
+	acpi_handle handle;
+	void *sdw;
+
+	handle = ACPI_HANDLE(sdev->dev);
+
+	hdev = sdev->pdata->hw_pdata;
+
+	memset(&res, 0, sizeof(res));
+
+	res.mmio_base = sdev->bar[HDA_DSP_BAR];
+	res.irq = sdev->ipc_irq;
+	res.handle = hdev->info.handle;
+	res.parent = sdev->dev;
+
+	/*
+	 * ops and arg fields are not populated for now,
+	 * they will be needed when the DAI callbacks are
+	 * provided
+	 */
+
+	/* we could filter links here if needed, e.g for quirks */
+	res.count = hdev->info.count;
+	res.link_mask = hdev->info.link_mask;
+
+	sdw = sdw_intel_probe(&res);
+	if (!sdw) {
+		dev_err(sdev->dev, "error: SoundWire probe failed\n");
+		return -EINVAL;
+	}
+
+	/* save context */
+	hdev->sdw = sdw;
+
+	return 0;
+}
+
+int hda_sdw_startup(struct snd_sof_dev *sdev)
+{
+	struct sof_intel_hda_dev *hdev;
+
+	hdev = sdev->pdata->hw_pdata;
+
+	return sdw_intel_startup(hdev->sdw);
+}
+
+static int hda_sdw_exit(struct snd_sof_dev *sdev)
+{
+	struct sof_intel_hda_dev *hdev;
+
+	hdev = sdev->pdata->hw_pdata;
+
+	hda_sdw_int_enable(sdev, false);
+
+	if (hdev->sdw)
+		sdw_intel_exit(hdev->sdw);
+	hdev->sdw = NULL;
+
+	return 0;
+}
+#endif
+
 /*
  * Debug
  */
@@ -346,9 +440,12 @@ static const char *fixup_tplg_name(struct snd_sof_dev *sdev,
 static int hda_init_caps(struct snd_sof_dev *sdev)
 {
 	struct hdac_bus *bus = sof_to_bus(sdev);
+	struct snd_sof_pdata *pdata = sdev->pdata;
 #if IS_ENABLED(CONFIG_SND_SOC_SOF_HDA)
 	struct hdac_ext_link *hlink;
 #endif
+	struct sof_intel_hda_dev *hdev = pdata->hw_pdata;
+	u32 link_mask;
 	int ret = 0;
 
 	device_disable_async_suspend(bus->dev);
@@ -365,6 +462,27 @@ static int hda_init_caps(struct snd_sof_dev *sdev)
 		return ret;
 	}
 
+	/* scan SoundWire capabilities exposed by DSDT */
+	ret = hda_sdw_acpi_scan(sdev);
+	if (ret < 0) {
+		dev_err(sdev->dev, "error: SoundWire ACPI scan error\n");
+		return ret;
+	}
+
+	link_mask = hdev->info.link_mask;
+	if (!link_mask) {
+		/*
+		 * probe/allocated SoundWire resources.
+		 * The hardware configuration takes place in hda_sdw_startup
+		 * after power rails are enabled.
+		 */
+		ret = hda_sdw_probe(sdev);
+		if (ret < 0) {
+			dev_err(sdev->dev, "error: SoundWire probe error\n");
+			return ret;
+		}
+	}
+
 #if IS_ENABLED(CONFIG_SND_SOC_SOF_HDA)
 	if (bus->mlcap)
 		snd_hdac_ext_bus_get_ml_capabilities(bus);
@@ -622,6 +740,8 @@ int hda_dsp_remove(struct snd_sof_dev *sdev)
 	snd_hdac_ext_bus_device_remove(bus);
 #endif
 
+	hda_sdw_exit(sdev);
+
 	if (!IS_ERR_OR_NULL(hda->dmic_dev))
 		platform_device_unregister(hda->dmic_dev);
 
diff --git a/sound/soc/sof/intel/hda.h b/sound/soc/sof/intel/hda.h
index 2a57fc9f3e58..928a3432e9e6 100644
--- a/sound/soc/sof/intel/hda.h
+++ b/sound/soc/sof/intel/hda.h
@@ -11,6 +11,8 @@
 #ifndef __SOF_INTEL_HDA_H
 #define __SOF_INTEL_HDA_H
 
+#include <linux/soundwire/sdw.h>
+#include <linux/soundwire/sdw_intel.h>
 #include <sound/compress_driver.h>
 #include <sound/hda_codec.h>
 #include <sound/hdaudio_ext.h>
@@ -436,6 +438,12 @@ struct sof_intel_hda_dev {
 
 	/* delayed work to enter D0I3 opportunistically */
 	struct delayed_work d0i3_work;
+
+	/* ACPI information stored between scan and probe steps */
+	struct sdw_intel_acpi_info info;
+
+	/* sdw context allocated by SoundWire driver */
+	struct sdw_intel_ctx *sdw;
 };
 
 static inline struct hdac_bus *sof_to_bus(struct snd_sof_dev *s)
@@ -654,6 +662,42 @@ int hda_dsp_trace_init(struct snd_sof_dev *sdev, u32 *stream_tag);
 int hda_dsp_trace_release(struct snd_sof_dev *sdev);
 int hda_dsp_trace_trigger(struct snd_sof_dev *sdev, int cmd);
 
+/*
+ * SoundWire support
+ */
+#if IS_ENABLED(CONFIG_SND_SOC_SOF_INTEL_SOUNDWIRE)
+
+int hda_sdw_startup(struct snd_sof_dev *sdev);
+void hda_sdw_int_enable(struct snd_sof_dev *sdev, bool enable);
+
+#else
+
+static inline int hda_sdw_acpi_scan(struct snd_sof_dev *sdev)
+{
+	return 0;
+}
+
+static inline int hda_sdw_probe(struct snd_sof_dev *sdev)
+{
+	return 0;
+}
+
+static inline int hda_sdw_startup(struct snd_sof_dev *sdev)
+{
+	return 0;
+}
+
+static inline int hda_sdw_exit(struct snd_sof_dev *sdev)
+{
+	return 0;
+}
+
+static inline void hda_sdw_int_enable(struct snd_sof_dev *sdev, bool enable)
+{
+}
+
+#endif
+
 /* common dai driver */
 extern struct snd_soc_dai_driver skl_dai[];
 
-- 
2.20.1


  parent reply	other threads:[~2020-03-25 21:54 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-03-25 21:50 [PATCH v2 00/11] ASoC: SOF: Intel: add SoundWire support Pierre-Louis Bossart
2020-03-25 21:50 ` [PATCH v2 01/11] ASoC: soc-acpi: expand description of _ADR-based devices Pierre-Louis Bossart
2020-03-27 15:34   ` Applied "ASoC: soc-acpi: expand description of _ADR-based devices" to the asoc tree Mark Brown
2020-03-25 21:50 ` Pierre-Louis Bossart [this message]
2020-03-25 21:50 ` [PATCH v2 03/11] ASoC: SOF: IPC: dai-intel: move ALH declarations in header file Pierre-Louis Bossart
2020-03-25 21:50 ` [PATCH v2 04/11] ASoC: SOF: Intel: hda: add SoundWire stream config/free callbacks Pierre-Louis Bossart
2020-03-25 21:50 ` [PATCH v2 05/11] ASoC: SOF: Intel: hda: initial SoundWire machine driver autodetect Pierre-Louis Bossart
2020-03-27 15:34   ` Applied "ASoC: SOF: Intel: hda: initial SoundWire machine driver autodetect" to the asoc tree Mark Brown
2020-03-25 21:50 ` [PATCH v2 06/11] ASoC: SOF: Intel: hda: disable SoundWire interrupts on suspend Pierre-Louis Bossart
2020-03-25 21:50 ` [PATCH v2 07/11] ASoC: SOF: Intel: hda: merge IPC, stream and SoundWire interrupt handlers Pierre-Louis Bossart
2020-03-25 21:50 ` [PATCH v2 08/11] ASoC: SOF: Intel: hda: add parameter to control SoundWire clock stop quirks Pierre-Louis Bossart
2020-03-25 21:50 ` [PATCH v2 09/11] ASoC: SOF: Intel: hda: add WAKEEN interrupt support for SoundWire Pierre-Louis Bossart
2020-03-25 21:50 ` [PATCH v2 10/11] Asoc: SOF: Intel: hda: check SoundWire wakeen interrupt in irq thread Pierre-Louis Bossart
2020-03-25 21:50 ` [PATCH v2 11/11] ASoC: SOF: Intel: hda-ctrl: add reset cycle before parsing capabilities Pierre-Louis Bossart
2020-03-27 15:33   ` Applied "ASoC: SOF: Intel: hda-ctrl: add reset cycle before parsing capabilities" to the asoc tree Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200325215027.28716-3-pierre-louis.bossart@linux.intel.com \
    --to=pierre-louis.bossart@linux.intel.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=broonie@kernel.org \
    --cc=tiwai@suse.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.