All of lore.kernel.org
 help / color / mirror / Atom feed
From: Vipin Anand <vipin.anand@intel.com>
To: intel-gfx@lists.freedesktop.org
Subject: [Intel-gfx] [PATCH v3 2/7] drm/i915/display: Enable HDR on gen9 devices with MCA Lspcon
Date: Fri, 27 Mar 2020 13:01:35 +0530	[thread overview]
Message-ID: <20200327073140.11568-3-vipin.anand@intel.com> (raw)
In-Reply-To: <20200327073140.11568-1-vipin.anand@intel.com>

From: Uma Shankar <uma.shankar@intel.com>

Gen9 hardware supports HDMI2.0 through LSPCON chips.
Extending HDR support for MCA LSPCON based GEN9 devices.

SOC will drive LSPCON as DP and send HDR metadata as standard
DP SDP packets. LSPCON will be set to operate in PCON mode,
will receive the metadata and create Dynamic Range and
Mastering Infoframe (DRM packets) and send it to HDR capable
HDMI sink devices.

v2: Re-used hsw infoframe write implementation for HDR metadata
for LSPCON as per Ville's suggestion.

Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Vipin Anand <vipin.anand@intel.com>
---
 drivers/gpu/drm/i915/display/intel_hdmi.c   | 10 ++++++
 drivers/gpu/drm/i915/display/intel_lspcon.c | 35 +++++++++++++++------
 drivers/gpu/drm/i915/display/intel_lspcon.h |  5 ++-
 3 files changed, 39 insertions(+), 11 deletions(-)

diff --git a/drivers/gpu/drm/i915/display/intel_hdmi.c b/drivers/gpu/drm/i915/display/intel_hdmi.c
index 93ac0f296852..9ae2f88cc925 100644
--- a/drivers/gpu/drm/i915/display/intel_hdmi.c
+++ b/drivers/gpu/drm/i915/display/intel_hdmi.c
@@ -577,6 +577,16 @@ static u32 hsw_infoframes_enabled(struct intel_encoder *encoder,
 	return val & mask;
 }
 
+void lspcon_drm_write_infoframe(struct intel_encoder *encoder,
+	const struct intel_crtc_state *crtc_state,
+	unsigned int type,
+	const void *frame, ssize_t len)
+{
+	DRM_DEBUG_KMS("Update HDR metadata for lspcon\n");
+	/* It uses the legacy hsw implementation for the same */
+	hsw_write_infoframe(encoder, crtc_state, type, frame, len);
+}
+
 static const u8 infoframe_type_to_idx[] = {
 	HDMI_PACKET_TYPE_GENERAL_CONTROL,
 	HDMI_PACKET_TYPE_GAMUT_METADATA,
diff --git a/drivers/gpu/drm/i915/display/intel_lspcon.c b/drivers/gpu/drm/i915/display/intel_lspcon.c
index 2e41ae483a23..c5ddabf903d6 100644
--- a/drivers/gpu/drm/i915/display/intel_lspcon.c
+++ b/drivers/gpu/drm/i915/display/intel_lspcon.c
@@ -460,27 +460,42 @@ void lspcon_write_infoframe(struct intel_encoder *encoder,
 			    unsigned int type,
 			    const void *frame, ssize_t len)
 {
-	bool ret;
+	bool ret = true;
 	struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
 	struct intel_lspcon *lspcon = enc_to_intel_lspcon(encoder);
 
 	/* LSPCON only needs AVI IF */
-	if (type != HDMI_INFOFRAME_TYPE_AVI)
+	if (!(type == HDMI_INFOFRAME_TYPE_AVI ||
+	      type == HDMI_PACKET_TYPE_GAMUT_METADATA))
 		return;
 
-	if (lspcon->vendor == LSPCON_VENDOR_MCA)
-		ret = _lspcon_write_avi_infoframe_mca(&intel_dp->aux,
-						      frame, len);
-	else
-		ret = _lspcon_write_avi_infoframe_parade(&intel_dp->aux,
-							 frame, len);
+	/*
+	 * Supporting HDR on MCA LSPCON
+	 * Todo: Add support for Parade later
+	 */
+	if (type == HDMI_PACKET_TYPE_GAMUT_METADATA &&
+	    lspcon->vendor != LSPCON_VENDOR_MCA)
+		return;
+
+	if (lspcon->vendor == LSPCON_VENDOR_MCA) {
+		if (type == HDMI_INFOFRAME_TYPE_AVI)
+			ret = _lspcon_write_avi_infoframe_mca(&intel_dp->aux,
+							      frame, len);
+		else if (type == HDMI_PACKET_TYPE_GAMUT_METADATA)
+			lspcon_drm_write_infoframe(encoder, crtc_state,
+						   HDMI_PACKET_TYPE_GAMUT_METADATA,
+						   frame, VIDEO_DIP_DATA_SIZE);
+	} else {
+		ret = _lspcon_write_avi_infoframe_parade(&intel_dp->aux, frame,
+							 len);
+	}
 
 	if (!ret) {
-		DRM_ERROR("Failed to write AVI infoframes\n");
+		DRM_ERROR("Failed to write infoframes\n");
 		return;
 	}
 
-	DRM_DEBUG_DRIVER("AVI infoframes updated successfully\n");
+	DRM_DEBUG_DRIVER("Infoframes updated successfully\n");
 }
 
 void lspcon_read_infoframe(struct intel_encoder *encoder,
diff --git a/drivers/gpu/drm/i915/display/intel_lspcon.h b/drivers/gpu/drm/i915/display/intel_lspcon.h
index 37cfddf8a9c5..b2051f236223 100644
--- a/drivers/gpu/drm/i915/display/intel_lspcon.h
+++ b/drivers/gpu/drm/i915/display/intel_lspcon.h
@@ -34,5 +34,8 @@ u32 lspcon_infoframes_enabled(struct intel_encoder *encoder,
 			      const struct intel_crtc_state *pipe_config);
 void lspcon_ycbcr420_config(struct drm_connector *connector,
 			    struct intel_crtc_state *crtc_state);
-
+void lspcon_drm_write_infoframe(struct intel_encoder *encoder,
+				const struct intel_crtc_state *crtc_state,
+				unsigned int type,
+				const void *frame, ssize_t len);
 #endif /* __INTEL_LSPCON_H__ */
-- 
2.26.0

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

  parent reply	other threads:[~2020-03-27  7:33 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-03-27  7:31 [Intel-gfx] [PATCH v3 0/7] Enable HDR on Gen9 devices with lspcon hdr capability Vipin Anand
2020-03-27  7:31 ` [Intel-gfx] [PATCH v3 1/7] drm/i915/display: Add HDR Capability detection for LSPCON Vipin Anand
2020-03-27  7:31 ` Vipin Anand [this message]
2020-03-27  7:31 ` [Intel-gfx] [PATCH v3 3/7] drm/i915/display: Attach HDR property for capable Gen9 devices Vipin Anand
2020-03-27  7:31 ` [Intel-gfx] [PATCH v3 4/7] drm/i915/display: Set HDR Infoframe for HDR capable LSPCON devices Vipin Anand
2020-03-27  7:31 ` [Intel-gfx] [PATCH v3 5/7] drm/i915/display: Enable BT2020 for HDR on " Vipin Anand
2020-03-27  7:31 ` [Intel-gfx] [PATCH v3 6/7] drm/i915/display: Reduce blanking to support 4k60@10bpp for LSPCON Vipin Anand
2020-03-27  7:31 ` [Intel-gfx] [PATCH v3 7/7] drm:i915:display: add checks for Gen9 devices with hdr capability Vipin Anand
2020-03-27  8:16 ` [Intel-gfx] [PATCH v3 0/7] Enable HDR on Gen9 devices with lspcon " Shankar, Uma
2020-04-07 12:48   ` Jani Nikula
2020-04-07 13:01     ` Shankar, Uma

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200327073140.11568-3-vipin.anand@intel.com \
    --to=vipin.anand@intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.