From: Marek Vasut <marex@denx.de>
To: linux-arm-kernel@lists.infradead.org
Cc: Marek Vasut <marex@denx.de>,
Alexandre Torgue <alexandre.torgue@st.com>,
Patrice Chotard <patrice.chotard@st.com>,
Patrick Delaunay <patrick.delaunay@st.com>,
Maxime Coquelin <mcoquelin.stm32@gmail.com>,
Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>,
linux-stm32@st-md-mailman.stormreply.com
Subject: [PATCH V4 17/22] ARM: dts: stm32: Add alternate pinmux for LTDC pins
Date: Wed, 1 Apr 2020 15:22:32 +0200 [thread overview]
Message-ID: <20200401132237.60880-18-marex@denx.de> (raw)
In-Reply-To: <20200401132237.60880-1-marex@denx.de>
Add new mux option for LTDC pins, this is used on AV96 board.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
Cc: Patrick Delaunay <patrick.delaunay@st.com>
Cc: linux-stm32@st-md-mailman.stormreply.com
To: linux-arm-kernel@lists.infradead.org
---
V2: No change
V3: No change
V4: - Rebase on stm32-next
- Rename to ltdc.*pins_d
---
arch/arm/boot/dts/stm32mp15-pinctrl.dtsi | 74 ++++++++++++++++++++++++
1 file changed, 74 insertions(+)
diff --git a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
index f4bf87bd9b7e..c3a7402860af 100644
--- a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
@@ -662,6 +662,80 @@ pins1 {
};
};
+ ltdc_pins_d: ltdc-3 {
+ pins1 {
+ pinmux = <STM32_PINMUX('G', 7, AF14)>; /* LCD_CLK */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <3>;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('I', 10, AF14)>, /* LCD_HSYNC */
+ <STM32_PINMUX('I', 9, AF14)>, /* LCD_VSYNC */
+ <STM32_PINMUX('E', 13, AF14)>, /* LCD_DE */
+ <STM32_PINMUX('G', 13, AF14)>, /* LCD_R0 */
+ <STM32_PINMUX('H', 3, AF14)>, /* LCD_R1 */
+ <STM32_PINMUX('H', 8, AF14)>, /* LCD_R2 */
+ <STM32_PINMUX('H', 9, AF14)>, /* LCD_R3 */
+ <STM32_PINMUX('A', 5, AF14)>, /* LCD_R4 */
+ <STM32_PINMUX('H', 11, AF14)>, /* LCD_R5 */
+ <STM32_PINMUX('H', 12, AF14)>, /* LCD_R6 */
+ <STM32_PINMUX('E', 15, AF14)>, /* LCD_R7 */
+ <STM32_PINMUX('E', 5, AF14)>, /* LCD_G0 */
+ <STM32_PINMUX('B', 0, AF14)>, /* LCD_G1 */
+ <STM32_PINMUX('H', 13, AF14)>, /* LCD_G2 */
+ <STM32_PINMUX('E', 11, AF14)>, /* LCD_G3 */
+ <STM32_PINMUX('H', 15, AF14)>, /* LCD_G4 */
+ <STM32_PINMUX('H', 4, AF9)>, /* LCD_G5 */
+ <STM32_PINMUX('I', 11, AF9)>, /* LCD_G6 */
+ <STM32_PINMUX('G', 8, AF14)>, /* LCD_G7 */
+ <STM32_PINMUX('D', 9, AF14)>, /* LCD_B0 */
+ <STM32_PINMUX('G', 12, AF14)>, /* LCD_B1 */
+ <STM32_PINMUX('G', 10, AF14)>, /* LCD_B2 */
+ <STM32_PINMUX('D', 10, AF14)>, /* LCD_B3 */
+ <STM32_PINMUX('E', 12, AF14)>, /* LCD_B4 */
+ <STM32_PINMUX('A', 3, AF14)>, /* LCD_B5 */
+ <STM32_PINMUX('B', 8, AF14)>, /* LCD_B6 */
+ <STM32_PINMUX('I', 7, AF14)>; /* LCD_B7 */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <2>;
+ };
+ };
+
+ ltdc_sleep_pins_d: ltdc-sleep-3 {
+ pins {
+ pinmux = <STM32_PINMUX('G', 7, ANALOG)>, /* LCD_CLK */
+ <STM32_PINMUX('I', 10, ANALOG)>, /* LCD_HSYNC */
+ <STM32_PINMUX('I', 9, ANALOG)>, /* LCD_VSYNC */
+ <STM32_PINMUX('E', 13, ANALOG)>, /* LCD_DE */
+ <STM32_PINMUX('G', 13, ANALOG)>, /* LCD_R0 */
+ <STM32_PINMUX('H', 3, ANALOG)>, /* LCD_R1 */
+ <STM32_PINMUX('H', 8, ANALOG)>, /* LCD_R2 */
+ <STM32_PINMUX('H', 9, ANALOG)>, /* LCD_R3 */
+ <STM32_PINMUX('A', 5, ANALOG)>, /* LCD_R4 */
+ <STM32_PINMUX('H', 11, ANALOG)>, /* LCD_R5 */
+ <STM32_PINMUX('H', 12, ANALOG)>, /* LCD_R6 */
+ <STM32_PINMUX('E', 15, ANALOG)>, /* LCD_R7 */
+ <STM32_PINMUX('E', 5, ANALOG)>, /* LCD_G0 */
+ <STM32_PINMUX('B', 0, ANALOG)>, /* LCD_G1 */
+ <STM32_PINMUX('H', 13, ANALOG)>, /* LCD_G2 */
+ <STM32_PINMUX('E', 11, ANALOG)>, /* LCD_G3 */
+ <STM32_PINMUX('H', 15, ANALOG)>, /* LCD_G4 */
+ <STM32_PINMUX('H', 4, ANALOG)>, /* LCD_G5 */
+ <STM32_PINMUX('I', 11, ANALOG)>, /* LCD_G6 */
+ <STM32_PINMUX('G', 8, ANALOG)>, /* LCD_G7 */
+ <STM32_PINMUX('D', 9, ANALOG)>, /* LCD_B0 */
+ <STM32_PINMUX('G', 12, ANALOG)>, /* LCD_B1 */
+ <STM32_PINMUX('G', 10, ANALOG)>, /* LCD_B2 */
+ <STM32_PINMUX('D', 10, ANALOG)>, /* LCD_B3 */
+ <STM32_PINMUX('E', 12, ANALOG)>, /* LCD_B4 */
+ <STM32_PINMUX('A', 3, ANALOG)>, /* LCD_B5 */
+ <STM32_PINMUX('B', 8, ANALOG)>, /* LCD_B6 */
+ <STM32_PINMUX('I', 7, ANALOG)>; /* LCD_B7 */
+ };
+ };
+
m_can1_pins_a: m-can1-0 {
pins1 {
pinmux = <STM32_PINMUX('H', 13, AF9)>; /* CAN1_TX */
--
2.25.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2020-04-01 13:27 UTC|newest]
Thread overview: 53+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-04-01 13:22 [PATCH V4 00/22] ARM: dts: stm32: Repair AV96 board Marek Vasut
2020-04-01 13:22 ` [PATCH V4 01/22] ARM: dts: stm32: Add alternate pinmux for ethernet RGMII Marek Vasut
2020-04-01 13:22 ` [PATCH V4 02/22] ARM: dts: stm32: Repair ethernet operation on AV96 Marek Vasut
2020-04-01 13:22 ` [PATCH V4 03/22] ARM: dts: stm32: Add missing ethernet PHY reset " Marek Vasut
2020-04-06 6:10 ` Manivannan Sadhasivam
2020-04-01 13:22 ` [PATCH V4 04/22] ARM: dts: stm32: Add missing ethernet PHY skews " Marek Vasut
2020-04-01 13:22 ` [PATCH V4 05/22] ARM: dts: stm32: Add alternate pinmux for SDMMC1 direction pins Marek Vasut
2020-04-01 13:22 ` [PATCH V4 06/22] ARM: dts: stm32: Repair SDMMC1 operation on AV96 Marek Vasut
2020-04-06 6:24 ` Manivannan Sadhasivam
2020-04-01 13:22 ` [PATCH V4 07/22] ARM: dts: stm32: Repair PMIC configuration " Marek Vasut
2020-04-01 13:22 ` [PATCH V4 08/22] ARM: dts: stm32: Repair PMIC interrupt " Marek Vasut
2020-04-01 13:22 ` [PATCH V4 09/22] ARM: dts: stm32: Add alternate pinmux for SDMMC2 pins 4-7 Marek Vasut
2020-04-01 13:22 ` [PATCH V4 10/22] ARM: dts: stm32: Add eMMC attached to SDMMC2 on AV96 Marek Vasut
2020-04-06 6:47 ` Manivannan Sadhasivam
2020-04-01 13:22 ` [PATCH V4 11/22] ARM: dts: stm32: Add QSPI NOR " Marek Vasut
2020-04-06 6:49 ` Manivannan Sadhasivam
2020-04-01 13:22 ` [PATCH V4 12/22] ARM: dts: stm32: Add configuration EEPROM " Marek Vasut
2020-04-01 13:22 ` [PATCH V4 13/22] ARM: dts: stm32: Add alternate pinmux for SDMMC3 pins Marek Vasut
2020-04-01 13:22 ` [PATCH V4 14/22] ARM: dts: stm32: Enable WiFi on AV96 Marek Vasut
2020-04-01 13:22 ` [PATCH V4 15/22] ARM: dts: stm32: Add alternate pinmux for USART2 pins Marek Vasut
2020-04-01 13:22 ` [PATCH V4 16/22] ARM: dts: stm32: Enable Bluetooth on AV96 Marek Vasut
2020-04-01 13:22 ` Marek Vasut [this message]
2020-04-01 13:22 ` [PATCH V4 18/22] ARM: dts: stm32: Add bindings for HDMI video " Marek Vasut
2020-04-06 7:05 ` Manivannan Sadhasivam
2020-04-01 13:22 ` [PATCH V4 19/22] ARM: dts: stm32: Add alternate pinmux for SAI2 pins Marek Vasut
2020-04-01 13:22 ` [PATCH V4 20/22] ARM: dts: stm32: Add bindings for audio on AV96 Marek Vasut
2020-04-01 13:22 ` [PATCH V4 21/22] ARM: dts: stm32: Add bindings for USB " Marek Vasut
2020-04-06 7:22 ` Manivannan Sadhasivam
2020-04-06 11:08 ` Marek Vasut
2020-04-07 18:37 ` Marek Vasut
2020-04-10 9:08 ` Manivannan Sadhasivam
2020-04-10 9:16 ` Marek Vasut
2020-04-10 11:34 ` Manivannan Sadhasivam
2020-04-10 18:02 ` Marek Vasut
2020-04-11 4:12 ` Manivannan Sadhasivam
2020-04-12 1:54 ` Marek Vasut
2020-04-01 13:22 ` [PATCH V4 22/22] ARM: dts: stm32: Rename LEDs to match silkscreen " Marek Vasut
2020-04-06 7:24 ` Manivannan Sadhasivam
2020-04-05 14:43 ` [PATCH V4 00/22] ARM: dts: stm32: Repair AV96 board Manivannan Sadhasivam
2020-04-05 14:55 ` Marek Vasut
2020-04-05 18:37 ` Manivannan Sadhasivam
2020-04-05 20:01 ` Marek Vasut
2020-04-06 6:04 ` Manivannan Sadhasivam
2020-04-06 7:27 ` Manivannan Sadhasivam
2020-04-07 15:32 ` Marek Vasut
2020-04-10 9:00 ` Manivannan Sadhasivam
2020-04-10 9:55 ` Marek Vasut
2020-04-10 11:28 ` Manivannan Sadhasivam
2020-04-10 18:03 ` Marek Vasut
2020-04-21 10:30 ` Marek Vasut
2020-04-21 16:04 ` Alexandre Torgue
2020-04-21 17:07 ` Marek Vasut
2020-04-22 7:27 ` Alexandre Torgue
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200401132237.60880-18-marex@denx.de \
--to=marex@denx.de \
--cc=alexandre.torgue@st.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=manivannan.sadhasivam@linaro.org \
--cc=mcoquelin.stm32@gmail.com \
--cc=patrice.chotard@st.com \
--cc=patrick.delaunay@st.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.