All of lore.kernel.org
 help / color / mirror / Atom feed
From: zhang.lyra@gmail.com
To: soc@kernel.org, Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>
Cc: Arnd Bergmann <arnd@arndb.de>,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	Orson Zhai <orsonzhai@gmail.com>,
	Baolin Wang <baolin.wang7@gmail.com>,
	Chunyan Zhang <zhang.lyra@gmail.com>,
	Chunyan Zhang <chunyan.zhang@unisoc.com>
Subject: [RESEND PATCH 1/2] arm64: dts: Add SC9863A clock nodes
Date: Tue, 14 Apr 2020 18:16:35 +0800	[thread overview]
Message-ID: <20200414101636.24503-2-zhang.lyra@gmail.com> (raw)
In-Reply-To: <20200414101636.24503-1-zhang.lyra@gmail.com>

From: Chunyan Zhang <chunyan.zhang@unisoc.com>

add clock devicetree nodes for SC9863A.

Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com>
---
 arch/arm64/boot/dts/sprd/sc9863a.dtsi |  24 ++++
 arch/arm64/boot/dts/sprd/sharkl3.dtsi | 164 ++++++++++++++++++++++++++
 2 files changed, 188 insertions(+)

diff --git a/arch/arm64/boot/dts/sprd/sc9863a.dtsi b/arch/arm64/boot/dts/sprd/sc9863a.dtsi
index 2c590ca1d079..1ad6f6e95bca 100644
--- a/arch/arm64/boot/dts/sprd/sc9863a.dtsi
+++ b/arch/arm64/boot/dts/sprd/sc9863a.dtsi
@@ -159,6 +159,30 @@
 			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
+		ap_clk: clock-controller@21500000 {
+			compatible = "sprd,sc9863a-ap-clk";
+			reg = <0 0x21500000 0 0x1000>;
+			clocks = <&ext_32k>, <&ext_26m>;
+			clock-names = "ext-32k", "ext-26m";
+			#clock-cells = <1>;
+		};
+
+		aon_clk: clock-controller@402d0000 {
+			compatible = "sprd,sc9863a-aon-clk";
+			reg = <0 0x402d0000 0 0x1000>;
+			clocks = <&ext_26m>, <&rco_100m>,
+				 <&ext_32k>, <&ext_4m>;
+			clock-names = "ext-26m", "rco-100m",
+				      "ext-32k", "ext-4m";
+			#clock-cells = <1>;
+		};
+
+		mm_clk: clock-controller@60900000 {
+			compatible = "sprd,sc9863a-mm-clk";
+			reg = <0 0x60900000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
 		funnel@10001000 {
 			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
 			reg = <0 0x10001000 0 0x1000>;
diff --git a/arch/arm64/boot/dts/sprd/sharkl3.dtsi b/arch/arm64/boot/dts/sprd/sharkl3.dtsi
index 0222128b10f7..206a4afdab1c 100644
--- a/arch/arm64/boot/dts/sprd/sharkl3.dtsi
+++ b/arch/arm64/boot/dts/sprd/sharkl3.dtsi
@@ -16,6 +16,149 @@
 		#size-cells = <2>;
 		ranges;
 
+		ap_ahb_regs: syscon@20e00000 {
+			compatible = "sprd,sc9863a-glbregs", "syscon",
+				     "simple-mfd";
+			reg = <0 0x20e00000 0 0x4000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0x20e00000 0x4000>;
+
+			apahb_gate: apahb-gate {
+				compatible = "sprd,sc9863a-apahb-gate";
+				reg = <0x0 0x1020>;
+				#clock-cells = <1>;
+			};
+		};
+
+		pmu_regs: syscon@402b0000 {
+			compatible = "sprd,sc9863a-glbregs", "syscon",
+				     "simple-mfd";
+			reg = <0 0x402b0000 0 0x4000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0x402b0000 0x4000>;
+
+			pmu_gate: pmu-gate {
+				compatible = "sprd,sc9863a-pmu-gate";
+				reg = <0 0x1200>;
+				clocks = <&ext_26m>;
+				clock-names = "ext-26m";
+				#clock-cells = <1>;
+			};
+		};
+
+		aon_apb_regs: syscon@402e0000 {
+			compatible = "sprd,sc9863a-glbregs", "syscon",
+				     "simple-mfd";
+			reg = <0 0x402e0000 0 0x4000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0x402e0000 0x4000>;
+
+			aonapb_gate: aonapb-gate {
+				compatible = "sprd,sc9863a-aonapb-gate";
+				reg = <0 0x1100>;
+				#clock-cells = <1>;
+			};
+		};
+
+		anlg_phy_g2_regs: syscon@40353000 {
+			compatible = "sprd,sc9863a-glbregs", "syscon",
+				     "simple-mfd";
+			reg = <0 0x40353000 0 0x3000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0x40353000 0x3000>;
+
+			pll: pll {
+				compatible = "sprd,sc9863a-pll";
+				reg = <0 0x100>;
+				clocks = <&ext_26m>;
+				clock-names = "ext-26m";
+				#clock-cells = <1>;
+			};
+		};
+
+		anlg_phy_g4_regs: syscon@40359000 {
+			compatible = "sprd,sc9863a-glbregs", "syscon",
+				     "simple-mfd";
+			reg = <0 0x40359000 0 0x3000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0x40359000 0x3000>;
+
+			mpll: mpll {
+				compatible = "sprd,sc9863a-mpll";
+				reg = <0 0x100>;
+				#clock-cells = <1>;
+			};
+		};
+
+		anlg_phy_g5_regs: syscon@4035c000 {
+			compatible = "sprd,sc9863a-glbregs", "syscon",
+				     "simple-mfd";
+			reg = <0 0x4035c000 0 0x3000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0x4035c000 0x3000>;
+
+			rpll: rpll {
+				compatible = "sprd,sc9863a-rpll";
+				reg = <0 0x100>;
+				clocks = <&ext_26m>;
+				clock-names = "ext-26m";
+				#clock-cells = <1>;
+			};
+		};
+
+		anlg_phy_g7_regs: syscon@40363000 {
+			compatible = "sprd,sc9863a-glbregs", "syscon",
+				     "simple-mfd";
+			reg = <0 0x40363000 0 0x3000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0x40363000 0x3000>;
+
+			dpll: dpll {
+				compatible = "sprd,sc9863a-dpll";
+				reg = <0 0x100>;
+				#clock-cells = <1>;
+			};
+		};
+
+		mm_ahb_regs: syscon@60800000 {
+			compatible = "sprd,sc9863a-glbregs", "syscon",
+				     "simple-mfd";
+			reg = <0 0x60800000 0 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0x60800000 0x3000>;
+
+			mm_gate: mm-gate {
+				compatible = "sprd,sc9863a-mm-gate";
+				reg = <0 0x1100>;
+				#clock-cells = <1>;
+			};
+		};
+
+		ap_apb_regs: syscon@71300000 {
+			compatible = "sprd,sc9863a-glbregs", "syscon",
+				     "simple-mfd";
+			reg = <0 0x71300000 0 0x4000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0x71300000 0x4000>;
+
+			apapb_gate: apapb-gate {
+				compatible = "sprd,sc9863a-apapb-gate";
+				reg = <0 0x1000>;
+				clocks = <&ext_26m>;
+				clock-names = "ext-26m";
+				#clock-cells = <1>;
+			};
+		};
+
 		apb@70000000 {
 			compatible = "simple-bus";
 			#address-cells = <1>;
@@ -75,4 +218,25 @@
 		clock-frequency = <26000000>;
 		clock-output-names = "ext-26m";
 	};
+
+	ext_32k: ext-32k {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "ext-32k";
+	};
+
+	ext_4m: ext-4m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <4000000>;
+		clock-output-names = "ext-4m";
+	};
+
+	rco_100m: rco-100m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+		clock-output-names = "rco-100m";
+	};
 };
-- 
2.20.1


  reply	other threads:[~2020-04-14 10:18 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-04-14 10:16 [RESEND PATCH 0/2] add clock and emmc/sd nodes for SC9863A zhang.lyra
2020-04-14 10:16 ` zhang.lyra [this message]
2020-04-14 10:16 ` [RESEND PATCH 2/2] arm64: dts: Add SC9863A emmc and sd card nodes zhang.lyra

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200414101636.24503-2-zhang.lyra@gmail.com \
    --to=zhang.lyra@gmail.com \
    --cc=arnd@arndb.de \
    --cc=baolin.wang7@gmail.com \
    --cc=chunyan.zhang@unisoc.com \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=orsonzhai@gmail.com \
    --cc=robh+dt@kernel.org \
    --cc=soc@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.