[PATCH 03/19] mmc: atmel-mci: Respect the cmd->busy_timeout from the mmc core

[Ulf Hansson <ulf.hansson@linaro.org>]

Using a fixed 2s timeout for all commands is a bit problematic.

For some commands it means waiting longer than needed for the timer to
expire, which may not a big issue, but still. For other commands, like for
an erase (CMD38) that uses a R1B response, may require longer timeouts than
2s. In these cases, we may end up treating the command as it failed, while
it just needed some more time to complete successfully.

Fix the problem by respecting the cmd->busy_timeout, which is provided by
the mmc core.

Cc: Ludovic Desroches <ludovic.desroches@microchip.com>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
---
 drivers/mmc/host/atmel-mci.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c
index 7292970065b6..5cb692687698 100644
--- a/drivers/mmc/host/atmel-mci.c
+++ b/drivers/mmc/host/atmel-mci.c
@@ -809,6 +809,9 @@ static u32 atmci_prepare_command(struct mmc_host *mmc,
 static void atmci_send_command(struct atmel_mci *host,
 		struct mmc_command *cmd, u32 cmd_flags)
 {
+	unsigned int timeout_ms = cmd->busy_timeout ? cmd->busy_timeout :
+		ATMCI_CMD_TIMEOUT_MS;
+
 	WARN_ON(host->cmd);
 	host->cmd = cmd;
 
@@ -819,8 +822,7 @@ static void atmci_send_command(struct atmel_mci *host,
 	atmci_writel(host, ATMCI_ARGR, cmd->arg);
 	atmci_writel(host, ATMCI_CMDR, cmd_flags);
 
-	mod_timer(&host->timer,
-		  jiffies + msecs_to_jiffies(ATMCI_CMD_TIMEOUT_MS));
+	mod_timer(&host->timer, jiffies + msecs_to_jiffies(timeout_ms));
 }
 
 static void atmci_send_stop_cmd(struct atmel_mci *host, struct mmc_data *data)
-- 
2.20.1