From: Yuantian Tang <andy.tang@nxp.com>
To: shawnguo@kernel.org, robh+dt@kernel.org, mark.rutland@arm.com,
catalin.marinas@arm.com, will.deacon@arm.com
Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, Yuantian Tang <andy.tang@nxp.com>
Subject: [PATCH] arm64: dts: lx2160a: add more thermal zone support
Date: Fri, 17 Apr 2020 14:16:18 +0800 [thread overview]
Message-ID: <20200417061618.48032-1-andy.tang@nxp.com> (raw)
There are 7 thermal zones in lx2160a soc. Add the
rest thermal zone node to enable them.
Also correct one of the values for tmu-calibration property.
Signed-off-by: Yuantian Tang <andy.tang@nxp.com>
---
.../arm64/boot/dts/freescale/fsl-lx2160a.dtsi | 130 +++++++++++++++++-
1 file changed, 125 insertions(+), 5 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
index ae1b113ab162..abaeb587de48 100644
--- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
@@ -436,19 +436,19 @@
};
thermal-zones {
- core_thermal1: core-thermal1 {
+ cluster6-7 {
polling-delay-passive = <1000>;
polling-delay = <5000>;
thermal-sensors = <&tmu 0>;
trips {
- core_cluster_alert: core-cluster-alert {
+ cluster6_7_alert: cluster6-7-alert {
temperature = <85000>;
hysteresis = <2000>;
type = "passive";
};
- core_cluster_crit: core-cluster-crit {
+ cluster6_7_crit: cluster6-7-crit {
temperature = <95000>;
hysteresis = <2000>;
type = "critical";
@@ -457,7 +457,7 @@
cooling-maps {
map0 {
- trip = <&core_cluster_alert>;
+ trip = <&cluster6_7_alert>;
cooling-device =
<&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
@@ -478,6 +478,126 @@
};
};
};
+
+ ddr-cluster5 {
+ polling-delay-passive = <1000>;
+ polling-delay = <5000>;
+ thermal-sensors = <&tmu 1>;
+
+ trips {
+ ddr-cluster5-alert {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ ddr-cluster5-crit {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+
+ wriop {
+ polling-delay-passive = <1000>;
+ polling-delay = <5000>;
+ thermal-sensors = <&tmu 2>;
+
+ trips {
+ wriop-alert {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ wriop-crit {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+
+ dce-qbman-hsio2 {
+ polling-delay-passive = <1000>;
+ polling-delay = <5000>;
+ thermal-sensors = <&tmu 3>;
+
+ trips {
+ dce-qbman-alert {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ dce-qbman-crit {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+
+ ccn-dpaa-tbu {
+ polling-delay-passive = <1000>;
+ polling-delay = <5000>;
+ thermal-sensors = <&tmu 4>;
+
+ trips {
+ ccn-dpaa-alert {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ ccn-dpaa-crit {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cluster4-hsio3 {
+ polling-delay-passive = <1000>;
+ polling-delay = <5000>;
+ thermal-sensors = <&tmu 5>;
+
+ trips {
+ clust4-hsio3-alert {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ clust4-hsio3-crit {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cluster2-3 {
+ polling-delay-passive = <1000>;
+ polling-delay = <5000>;
+ thermal-sensors = <&tmu 6>;
+
+ trips {
+ cluster2-3-alert {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cluster2-3-crit {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
};
soc {
@@ -549,7 +669,7 @@
/* Calibration data group 1 */
<0x00000000 0x00000035
/* Calibration data group 2 */
- 0x00010001 0x00000154>;
+ 0x00000001 0x00000154>;
little-endian;
#thermal-sensor-cells = <1>;
};
--
2.17.1
WARNING: multiple messages have this Message-ID (diff)
From: Yuantian Tang <andy.tang@nxp.com>
To: shawnguo@kernel.org, robh+dt@kernel.org, mark.rutland@arm.com,
catalin.marinas@arm.com, will.deacon@arm.com
Cc: devicetree@vger.kernel.org, Yuantian Tang <andy.tang@nxp.com>,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH] arm64: dts: lx2160a: add more thermal zone support
Date: Fri, 17 Apr 2020 14:16:18 +0800 [thread overview]
Message-ID: <20200417061618.48032-1-andy.tang@nxp.com> (raw)
There are 7 thermal zones in lx2160a soc. Add the
rest thermal zone node to enable them.
Also correct one of the values for tmu-calibration property.
Signed-off-by: Yuantian Tang <andy.tang@nxp.com>
---
.../arm64/boot/dts/freescale/fsl-lx2160a.dtsi | 130 +++++++++++++++++-
1 file changed, 125 insertions(+), 5 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
index ae1b113ab162..abaeb587de48 100644
--- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
@@ -436,19 +436,19 @@
};
thermal-zones {
- core_thermal1: core-thermal1 {
+ cluster6-7 {
polling-delay-passive = <1000>;
polling-delay = <5000>;
thermal-sensors = <&tmu 0>;
trips {
- core_cluster_alert: core-cluster-alert {
+ cluster6_7_alert: cluster6-7-alert {
temperature = <85000>;
hysteresis = <2000>;
type = "passive";
};
- core_cluster_crit: core-cluster-crit {
+ cluster6_7_crit: cluster6-7-crit {
temperature = <95000>;
hysteresis = <2000>;
type = "critical";
@@ -457,7 +457,7 @@
cooling-maps {
map0 {
- trip = <&core_cluster_alert>;
+ trip = <&cluster6_7_alert>;
cooling-device =
<&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
@@ -478,6 +478,126 @@
};
};
};
+
+ ddr-cluster5 {
+ polling-delay-passive = <1000>;
+ polling-delay = <5000>;
+ thermal-sensors = <&tmu 1>;
+
+ trips {
+ ddr-cluster5-alert {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ ddr-cluster5-crit {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+
+ wriop {
+ polling-delay-passive = <1000>;
+ polling-delay = <5000>;
+ thermal-sensors = <&tmu 2>;
+
+ trips {
+ wriop-alert {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ wriop-crit {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+
+ dce-qbman-hsio2 {
+ polling-delay-passive = <1000>;
+ polling-delay = <5000>;
+ thermal-sensors = <&tmu 3>;
+
+ trips {
+ dce-qbman-alert {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ dce-qbman-crit {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+
+ ccn-dpaa-tbu {
+ polling-delay-passive = <1000>;
+ polling-delay = <5000>;
+ thermal-sensors = <&tmu 4>;
+
+ trips {
+ ccn-dpaa-alert {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ ccn-dpaa-crit {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cluster4-hsio3 {
+ polling-delay-passive = <1000>;
+ polling-delay = <5000>;
+ thermal-sensors = <&tmu 5>;
+
+ trips {
+ clust4-hsio3-alert {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ clust4-hsio3-crit {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cluster2-3 {
+ polling-delay-passive = <1000>;
+ polling-delay = <5000>;
+ thermal-sensors = <&tmu 6>;
+
+ trips {
+ cluster2-3-alert {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cluster2-3-crit {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
};
soc {
@@ -549,7 +669,7 @@
/* Calibration data group 1 */
<0x00000000 0x00000035
/* Calibration data group 2 */
- 0x00010001 0x00000154>;
+ 0x00000001 0x00000154>;
little-endian;
#thermal-sensor-cells = <1>;
};
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2020-04-17 6:30 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-04-17 6:16 Yuantian Tang [this message]
2020-04-17 6:16 ` [PATCH] arm64: dts: lx2160a: add more thermal zone support Yuantian Tang
2020-05-07 6:20 ` Andy Tang
2020-05-07 6:20 ` Andy Tang
2020-05-11 14:29 ` Shawn Guo
2020-05-11 14:29 ` Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200417061618.48032-1-andy.tang@nxp.com \
--to=andy.tang@nxp.com \
--cc=catalin.marinas@arm.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
--cc=shawnguo@kernel.org \
--cc=will.deacon@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.