All of lore.kernel.org
 help / color / mirror / Atom feed
From: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
To: intel-gfx@lists.freedesktop.org
Cc: jani.nikula@intel.com
Subject: [Intel-gfx] [PATCH v25 05/11] drm/i915: Use bw state for per crtc SAGV evaluation
Date: Mon, 20 Apr 2020 11:44:53 +0300	[thread overview]
Message-ID: <20200420084453.848-1-stanislav.lisovskiy@intel.com> (raw)
In-Reply-To: <20200415150016.28363-1-stanislav.lisovskiy@intel.com>

Future platforms require per-crtc SAGV evaluation
and serializing global state when those are changed
from different commits.

v2: - Add has_sagv check to intel_crtc_can_enable_sagv
      so that it sets bit in reject mask.
    - Use bw_state in intel_pre/post_plane_enable_sagv
      instead of atomic state

v3: - Fixed rebase conflict, now using
      intel_atomic_crtc_state_for_each_plane_state in
      order to call it from atomic check
v4: - Use fb modifier from plane state

v5: - Make intel_has_sagv static again(Ville)
    - Removed unnecessary NULL assignments(Ville)
    - Removed unnecessary SAGV debug(Ville)
    - Call intel_compute_sagv_mask only for modesets(Ville)
    - Serialize global state only if sagv results change, but
      not mask itself(Ville)

Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Cc: Ville Syrjälä <ville.syrjala@intel.com>
Cc: James Ausmus <james.ausmus@intel.com>
---
 drivers/gpu/drm/i915/display/intel_bw.h |   6 ++
 drivers/gpu/drm/i915/intel_pm.c         | 113 ++++++++++++++++++------
 drivers/gpu/drm/i915/intel_pm.h         |   3 +-
 3 files changed, 93 insertions(+), 29 deletions(-)

diff --git a/drivers/gpu/drm/i915/display/intel_bw.h b/drivers/gpu/drm/i915/display/intel_bw.h
index ac004d6f4276..d6df91058223 100644
--- a/drivers/gpu/drm/i915/display/intel_bw.h
+++ b/drivers/gpu/drm/i915/display/intel_bw.h
@@ -18,6 +18,12 @@ struct intel_crtc_state;
 struct intel_bw_state {
 	struct intel_global_state base;
 
+	/*
+	 * Contains a bit mask, used to determine, whether correspondent
+	 * pipe allows SAGV or not.
+	 */
+	u8 pipe_sagv_reject;
+
 	unsigned int data_rate[I915_MAX_PIPES];
 	u8 num_active_planes[I915_MAX_PIPES];
 };
diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
index b0810d76ad47..d06a1a3713ed 100644
--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -43,6 +43,7 @@
 #include "i915_fixed.h"
 #include "i915_irq.h"
 #include "i915_trace.h"
+#include "display/intel_bw.h"
 #include "intel_pm.h"
 #include "intel_sideband.h"
 #include "../../../platform/x86/intel_ips.h"
@@ -3760,34 +3761,75 @@ intel_disable_sagv(struct drm_i915_private *dev_priv)
 void intel_sagv_pre_plane_update(struct intel_atomic_state *state)
 {
 	struct drm_i915_private *dev_priv = to_i915(state->base.dev);
+	const struct intel_bw_state *new_bw_state;
 
-	if (!intel_can_enable_sagv(state))
+	/*
+	 * Just return if we can't control SAGV or don't have it.
+	 * This is different from situation when we have SAGV but just can't
+	 * afford it due to DBuf limitation - in case if SAGV is completely
+	 * disabled in a BIOS, we are not even allowed to send a PCode request,
+	 * as it will throw an error. So have to check it here.
+	 */
+	if (!intel_has_sagv(dev_priv))
+		return;
+
+	new_bw_state = intel_atomic_get_new_bw_state(state);
+	if (!new_bw_state)
+		return;
+
+	if (!intel_can_enable_sagv(new_bw_state))
 		intel_disable_sagv(dev_priv);
 }
 
 void intel_sagv_post_plane_update(struct intel_atomic_state *state)
 {
 	struct drm_i915_private *dev_priv = to_i915(state->base.dev);
+	const struct intel_bw_state *new_bw_state;
 
-	if (intel_can_enable_sagv(state))
+	/*
+	 * Just return if we can't control SAGV or don't have it.
+	 * This is different from situation when we have SAGV but just can't
+	 * afford it due to DBuf limitation - in case if SAGV is completely
+	 * disabled in a BIOS, we are not even allowed to send a PCode request,
+	 * as it will throw an error. So have to check it here.
+	 */
+	if (!intel_has_sagv(dev_priv))
+		return;
+
+	new_bw_state = intel_atomic_get_new_bw_state(state);
+	if (!new_bw_state)
+		return;
+
+	if (intel_can_enable_sagv(new_bw_state))
 		intel_enable_sagv(dev_priv);
 }
 
 static bool intel_crtc_can_enable_sagv(const struct intel_crtc_state *crtc_state)
 {
-	struct drm_device *dev = crtc_state->uapi.crtc->dev;
-	struct drm_i915_private *dev_priv = to_i915(dev);
+	struct intel_atomic_state *state = to_intel_atomic_state(crtc_state->uapi.state);
 	struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
+	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
 	struct intel_plane *plane;
+	const struct intel_plane_state *plane_state;
 	int level, latency;
 
+	if (!intel_has_sagv(dev_priv))
+		return false;
+
 	if (!crtc_state->hw.active)
 		return true;
 
+	/*
+	 * SKL+ workaround: bspec recommends we disable SAGV when we have
+	 * more then one pipe enabled
+	 */
+	if (hweight8(state->active_pipes) > 1)
+		return false;
+
 	if (crtc_state->hw.adjusted_mode.flags & DRM_MODE_FLAG_INTERLACE)
 		return false;
 
-	for_each_intel_plane_on_crtc(dev, crtc, plane) {
+	intel_atomic_crtc_state_for_each_plane_state(plane, plane_state, crtc_state) {
 		const struct skl_plane_wm *wm =
 			&crtc_state->wm.skl.optimal.planes[plane->id];
 
@@ -3803,7 +3845,7 @@ static bool intel_crtc_can_enable_sagv(const struct intel_crtc_state *crtc_state
 		latency = dev_priv->wm.skl_latency[level];
 
 		if (skl_needs_memory_bw_wa(dev_priv) &&
-		    plane->base.state->fb->modifier ==
+		    plane_state->uapi.fb->modifier ==
 		    I915_FORMAT_MOD_X_TILED)
 			latency += 15;
 
@@ -3819,35 +3861,44 @@ static bool intel_crtc_can_enable_sagv(const struct intel_crtc_state *crtc_state
 	return true;
 }
 
-bool intel_can_enable_sagv(struct intel_atomic_state *state)
+bool intel_can_enable_sagv(const struct intel_bw_state *bw_state)
 {
-	struct drm_i915_private *dev_priv = to_i915(state->base.dev);
+	return bw_state->pipe_sagv_reject == 0;
+}
+
+static int intel_compute_sagv_mask(struct intel_atomic_state *state)
+{
+	int ret;
 	struct intel_crtc *crtc;
-	const struct intel_crtc_state *crtc_state;
-	enum pipe pipe;
+	struct intel_crtc_state *new_crtc_state;
+	struct intel_bw_state *new_bw_state = NULL;
+	const struct intel_bw_state *old_bw_state = NULL;
+	int i;
 
-	if (!intel_has_sagv(dev_priv))
-		return false;
+	for_each_new_intel_crtc_in_state(state, crtc,
+					 new_crtc_state, i) {
+		new_bw_state = intel_atomic_get_bw_state(state);
+		if (IS_ERR(new_bw_state))
+			return PTR_ERR(new_bw_state);
 
-	/*
-	 * If there are no active CRTCs, no additional checks need be performed
-	 */
-	if (hweight8(state->active_pipes) == 0)
-		return true;
+		old_bw_state = intel_atomic_get_old_bw_state(state);
 
-	/*
-	 * SKL+ workaround: bspec recommends we disable SAGV when we have
-	 * more then one pipe enabled
-	 */
-	if (hweight8(state->active_pipes) > 1)
-		return false;
+		if (intel_crtc_can_enable_sagv(new_crtc_state))
+			new_bw_state->pipe_sagv_reject &= ~BIT(crtc->pipe);
+		else
+			new_bw_state->pipe_sagv_reject |= BIT(crtc->pipe);
+	}
 
-	/* Since we're now guaranteed to only have one active CRTC... */
-	pipe = ffs(state->active_pipes) - 1;
-	crtc = intel_get_crtc_for_pipe(dev_priv, pipe);
-	crtc_state = to_intel_crtc_state(crtc->base.state);
+	if (!new_bw_state)
+		return 0;
 
-	return intel_crtc_can_enable_sagv(crtc_state);
+	if (intel_can_enable_sagv(new_bw_state) != intel_can_enable_sagv(old_bw_state)) {
+		ret = intel_atomic_serialize_global_state(&new_bw_state->base);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
 }
 
 /*
@@ -5860,6 +5911,12 @@ skl_compute_wm(struct intel_atomic_state *state)
 	if (ret)
 		return ret;
 
+	if (state->modeset) {
+		ret = intel_compute_sagv_mask(state);
+		if (ret)
+			return ret;
+	}
+
 	/*
 	 * skl_compute_ddb() will have adjusted the final watermarks
 	 * based on how much ddb is available. Now we can actually
diff --git a/drivers/gpu/drm/i915/intel_pm.h b/drivers/gpu/drm/i915/intel_pm.h
index 9a6036ab0f90..fd1dc422e6c5 100644
--- a/drivers/gpu/drm/i915/intel_pm.h
+++ b/drivers/gpu/drm/i915/intel_pm.h
@@ -9,6 +9,7 @@
 #include <linux/types.h>
 
 #include "i915_reg.h"
+#include "display/intel_bw.h"
 
 struct drm_device;
 struct drm_i915_private;
@@ -41,7 +42,7 @@ void skl_pipe_wm_get_hw_state(struct intel_crtc *crtc,
 			      struct skl_pipe_wm *out);
 void g4x_wm_sanitize(struct drm_i915_private *dev_priv);
 void vlv_wm_sanitize(struct drm_i915_private *dev_priv);
-bool intel_can_enable_sagv(struct intel_atomic_state *state);
+bool intel_can_enable_sagv(const struct intel_bw_state *bw_state);
 int intel_enable_sagv(struct drm_i915_private *dev_priv);
 int intel_disable_sagv(struct drm_i915_private *dev_priv);
 void intel_sagv_pre_plane_update(struct intel_atomic_state *state);
-- 
2.24.1.485.gad05a3d8e5

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

  parent reply	other threads:[~2020-04-20  8:48 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-04-15 14:39 [Intel-gfx] [PATCH v24 00/11] SAGV support for Gen12+ Stanislav Lisovskiy
2020-04-15 14:39 ` [Intel-gfx] [PATCH v24 01/11] drm/i915: Introduce skl_plane_wm_level accessor Stanislav Lisovskiy
2020-04-15 14:39 ` [Intel-gfx] [PATCH v24 02/11] drm/i915: Add intel_atomic_get_bw_*_state helpers Stanislav Lisovskiy
2020-04-15 14:39 ` [Intel-gfx] [PATCH v24 03/11] drm/i915: Prepare to extract gen specific functions from intel_can_enable_sagv Stanislav Lisovskiy
2020-04-15 14:57   ` Stanislav Lisovskiy
2020-04-15 14:39 ` [Intel-gfx] [PATCH v24 04/11] drm/i915: Add pre/post plane updates for SAGV Stanislav Lisovskiy
2020-04-17 17:47   ` Ville Syrjälä
2020-04-15 14:39 ` [Intel-gfx] [PATCH v24 05/11] drm/i915: Use bw state for per crtc SAGV evaluation Stanislav Lisovskiy
2020-04-15 15:00   ` Stanislav Lisovskiy
2020-04-17 17:52     ` Ville Syrjälä
2020-04-20  8:44     ` Stanislav Lisovskiy [this message]
2020-04-15 14:39 ` [Intel-gfx] [PATCH v24 06/11] drm/i915: Separate icl and skl SAGV checking Stanislav Lisovskiy
2020-04-20  8:46   ` [Intel-gfx] [PATCH v25 " Stanislav Lisovskiy
2020-04-15 14:39 ` [Intel-gfx] [PATCH v24 07/11] drm/i915: Add TGL+ SAGV support Stanislav Lisovskiy
2020-04-20  8:48   ` [Intel-gfx] [PATCH v25 " Stanislav Lisovskiy
2020-04-15 14:39 ` [Intel-gfx] [PATCH v24 08/11] drm/i915: Added required new PCode commands Stanislav Lisovskiy
2020-04-15 14:39 ` [Intel-gfx] [PATCH v24 09/11] drm/i915: Rename bw_state to new_bw_state Stanislav Lisovskiy
2020-04-15 14:39 ` [Intel-gfx] [PATCH v24 10/11] drm/i915: Restrict qgv points which don't have enough bandwidth Stanislav Lisovskiy
2020-04-20  8:49   ` [Intel-gfx] [PATCH v25 " Stanislav Lisovskiy
2020-04-15 14:39 ` [Intel-gfx] [PATCH v24 11/11] drm/i915: Enable SAGV support for Gen12 Stanislav Lisovskiy
2020-04-15 16:12 ` [Intel-gfx] ✗ Fi.CI.DOCS: warning for SAGV support for Gen12+ (rev21) Patchwork
2020-04-15 16:18 ` [Intel-gfx] ✓ Fi.CI.BAT: success " Patchwork
2020-04-16 12:38 ` [Intel-gfx] ✓ Fi.CI.IGT: " Patchwork
2020-04-20  8:58 ` [Intel-gfx] ✗ Fi.CI.BUILD: failure for SAGV support for Gen12+ (rev25) Patchwork
2020-04-20  9:34   ` Lisovskiy, Stanislav

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200420084453.848-1-stanislav.lisovskiy@intel.com \
    --to=stanislav.lisovskiy@intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=jani.nikula@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.