All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jonathan Marek <jonathan@marek.ca>
To: linux-arm-msm@vger.kernel.org
Cc: Andy Gross <agross@kernel.org>,
	Bjorn Andersson <bjorn.andersson@linaro.org>,
	Rob Herring <robh+dt@kernel.org>,
	devicetree@vger.kernel.org (open list:OPEN FIRMWARE AND
	FLATTENED DEVICE TREE BINDINGS),
	linux-kernel@vger.kernel.org (open list)
Subject: [PATCH] arm64: dts: qcom: fix pm8150 gpio interrupts
Date: Mon, 20 Apr 2020 11:35:43 -0400	[thread overview]
Message-ID: <20200420153543.14512-1-jonathan@marek.ca> (raw)

This was mistakenly copied from the downstream dts, however the upstream
driver works differently.

I only tested this with the pm8150_gpios node (used with volume button),
but the 2 others should be the same.

Signed-off-by: Jonathan Marek <jonathan@marek.ca>
---
 arch/arm64/boot/dts/qcom/pm8150.dtsi  | 14 ++------------
 arch/arm64/boot/dts/qcom/pm8150b.dtsi | 14 ++------------
 arch/arm64/boot/dts/qcom/pm8150l.dtsi | 14 ++------------
 3 files changed, 6 insertions(+), 36 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/pm8150.dtsi b/arch/arm64/boot/dts/qcom/pm8150.dtsi
index b6e304748a57..c0b197458665 100644
--- a/arch/arm64/boot/dts/qcom/pm8150.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8150.dtsi
@@ -73,18 +73,8 @@ pm8150_gpios: gpio@c000 {
 			reg = <0xc000>;
 			gpio-controller;
 			#gpio-cells = <2>;
-			interrupts = <0x0 0xc0 0x0 IRQ_TYPE_NONE>,
-				     <0x0 0xc1 0x0 IRQ_TYPE_NONE>,
-				     <0x0 0xc2 0x0 IRQ_TYPE_NONE>,
-				     <0x0 0xc3 0x0 IRQ_TYPE_NONE>,
-				     <0x0 0xc4 0x0 IRQ_TYPE_NONE>,
-				     <0x0 0xc5 0x0 IRQ_TYPE_NONE>,
-				     <0x0 0xc6 0x0 IRQ_TYPE_NONE>,
-				     <0x0 0xc7 0x0 IRQ_TYPE_NONE>,
-				     <0x0 0xc8 0x0 IRQ_TYPE_NONE>,
-				     <0x0 0xc9 0x0 IRQ_TYPE_NONE>,
-				     <0x0 0xca 0x0 IRQ_TYPE_NONE>,
-				     <0x0 0xcb 0x0 IRQ_TYPE_NONE>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
 		};
 	};
 
diff --git a/arch/arm64/boot/dts/qcom/pm8150b.dtsi b/arch/arm64/boot/dts/qcom/pm8150b.dtsi
index 322379d5c31f..40b5d75a4a1d 100644
--- a/arch/arm64/boot/dts/qcom/pm8150b.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8150b.dtsi
@@ -62,18 +62,8 @@ pm8150b_gpios: gpio@c000 {
 			reg = <0xc000>;
 			gpio-controller;
 			#gpio-cells = <2>;
-			interrupts = <0x2 0xc0 0x0 IRQ_TYPE_NONE>,
-				     <0x2 0xc1 0x0 IRQ_TYPE_NONE>,
-				     <0x2 0xc2 0x0 IRQ_TYPE_NONE>,
-				     <0x2 0xc3 0x0 IRQ_TYPE_NONE>,
-				     <0x2 0xc4 0x0 IRQ_TYPE_NONE>,
-				     <0x2 0xc5 0x0 IRQ_TYPE_NONE>,
-				     <0x2 0xc6 0x0 IRQ_TYPE_NONE>,
-				     <0x2 0xc7 0x0 IRQ_TYPE_NONE>,
-				     <0x2 0xc8 0x0 IRQ_TYPE_NONE>,
-				     <0x2 0xc9 0x0 IRQ_TYPE_NONE>,
-				     <0x2 0xca 0x0 IRQ_TYPE_NONE>,
-				     <0x2 0xcb 0x0 IRQ_TYPE_NONE>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
 		};
 	};
 
diff --git a/arch/arm64/boot/dts/qcom/pm8150l.dtsi b/arch/arm64/boot/dts/qcom/pm8150l.dtsi
index eb0e9a090e42..cf05e0685d10 100644
--- a/arch/arm64/boot/dts/qcom/pm8150l.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8150l.dtsi
@@ -56,18 +56,8 @@ pm8150l_gpios: gpio@c000 {
 			reg = <0xc000>;
 			gpio-controller;
 			#gpio-cells = <2>;
-			interrupts = <0x4 0xc0 0x0 IRQ_TYPE_NONE>,
-				     <0x4 0xc1 0x0 IRQ_TYPE_NONE>,
-				     <0x4 0xc2 0x0 IRQ_TYPE_NONE>,
-				     <0x4 0xc3 0x0 IRQ_TYPE_NONE>,
-				     <0x4 0xc4 0x0 IRQ_TYPE_NONE>,
-				     <0x4 0xc5 0x0 IRQ_TYPE_NONE>,
-				     <0x4 0xc6 0x0 IRQ_TYPE_NONE>,
-				     <0x4 0xc7 0x0 IRQ_TYPE_NONE>,
-				     <0x4 0xc8 0x0 IRQ_TYPE_NONE>,
-				     <0x4 0xc9 0x0 IRQ_TYPE_NONE>,
-				     <0x4 0xca 0x0 IRQ_TYPE_NONE>,
-				     <0x4 0xcb 0x0 IRQ_TYPE_NONE>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
 		};
 	};
 
-- 
2.26.1


             reply	other threads:[~2020-04-20 15:35 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-04-20 15:35 Jonathan Marek [this message]
2020-04-20 19:43 ` [PATCH] arm64: dts: qcom: fix pm8150 gpio interrupts Bjorn Andersson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200420153543.14512-1-jonathan@marek.ca \
    --to=jonathan@marek.ca \
    --cc=agross@kernel.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.