All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jerome Brunet <jbrunet@baylibre.com>
To: Kevin Hilman <khilman@baylibre.com>
Cc: Jerome Brunet <jbrunet@baylibre.com>,
	linux-amlogic@lists.infradead.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH 2/6] arm64: dts: meson-gx: add aiu support
Date: Tue, 21 Apr 2020 18:39:31 +0200	[thread overview]
Message-ID: <20200421163935.775935-3-jbrunet@baylibre.com> (raw)
In-Reply-To: <20200421163935.775935-1-jbrunet@baylibre.com>

Add the AIU audio device to the Amlogic GX SoC family DT.
ATM, this device provides the i2s and spdif output stages and also
the hdmi and internal codec glues.

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
---
 arch/arm64/boot/dts/amlogic/meson-gx.dtsi   | 13 ++++++++++++
 arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi | 23 +++++++++++++++++++++
 arch/arm64/boot/dts/amlogic/meson-gxl.dtsi  | 23 +++++++++++++++++++++
 3 files changed, 59 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
index 03f79fe045b7..a8dc8f810253 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
@@ -278,6 +278,17 @@ reset: reset-controller@4404 {
 				#reset-cells = <1>;
 			};
 
+			aiu: audio-controller@5400 {
+				compatible = "amlogic,aiu";
+				#sound-dai-cells = <2>;
+				sound-name-prefix = "AIU";
+				reg = <0x0 0x5400 0x0 0x2ac>;
+				interrupts = <GIC_SPI 48 IRQ_TYPE_EDGE_RISING>,
+					     <GIC_SPI 50 IRQ_TYPE_EDGE_RISING>;
+				interrupt-names = "i2s", "spdif";
+				status = "disabled";
+			};
+
 			uart_A: serial@84c0 {
 				compatible = "amlogic,meson-gx-uart";
 				reg = <0x0 0x84c0 0x0 0x18>;
@@ -626,6 +637,8 @@ hdmi_tx: hdmi-tx@c883a000 {
 			interrupts = <GIC_SPI 57 IRQ_TYPE_EDGE_RISING>;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			#sound-dai-cells = <0>;
+			sound-name-prefix = "HDMITX";
 			status = "disabled";
 
 			/* VPU VENC Input */
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
index 0cb40326b0d3..234490d3ee68 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
@@ -60,6 +60,29 @@ usb1: usb@c9100000 {
 	};
 };
 
+&aiu {
+	compatible = "amlogic,aiu-gxbb", "amlogic,aiu";
+	clocks = <&clkc CLKID_AIU_GLUE>,
+		 <&clkc CLKID_I2S_OUT>,
+		 <&clkc CLKID_AOCLK_GATE>,
+		 <&clkc CLKID_CTS_AMCLK>,
+		 <&clkc CLKID_MIXER_IFACE>,
+		 <&clkc CLKID_IEC958>,
+		 <&clkc CLKID_IEC958_GATE>,
+		 <&clkc CLKID_CTS_MCLK_I958>,
+		 <&clkc CLKID_CTS_I958>;
+	clock-names = "pclk",
+		      "i2s_pclk",
+		      "i2s_aoclk",
+		      "i2s_mclk",
+		      "i2s_mixer",
+		      "spdif_pclk",
+		      "spdif_aoclk",
+		      "spdif_mclk",
+		      "spdif_mclk_sel";
+	resets = <&reset RESET_AIU>;
+};
+
 &aobus {
 	pinctrl_aobus: pinctrl@14 {
 		compatible = "amlogic,meson-gxbb-aobus-pinctrl";
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
index 259d86399390..d9f00c5a9a5c 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
@@ -49,6 +49,29 @@ crypto: crypto@c883e000 {
 	};
 };
 
+&aiu {
+	compatible = "amlogic,aiu-gxl", "amlogic,aiu";
+	clocks = <&clkc CLKID_AIU_GLUE>,
+		 <&clkc CLKID_I2S_OUT>,
+		 <&clkc CLKID_AOCLK_GATE>,
+		 <&clkc CLKID_CTS_AMCLK>,
+		 <&clkc CLKID_MIXER_IFACE>,
+		 <&clkc CLKID_IEC958>,
+		 <&clkc CLKID_IEC958_GATE>,
+		 <&clkc CLKID_CTS_MCLK_I958>,
+		 <&clkc CLKID_CTS_I958>;
+	clock-names = "pclk",
+		      "i2s_pclk",
+		      "i2s_aoclk",
+		      "i2s_mclk",
+		      "i2s_mixer",
+		      "spdif_pclk",
+		      "spdif_aoclk",
+		      "spdif_mclk",
+		      "spdif_mclk_sel";
+	resets = <&reset RESET_AIU>;
+};
+
 &apb {
 	usb2_phy0: phy@78000 {
 		compatible = "amlogic,meson-gxl-usb2-phy";
-- 
2.25.2


WARNING: multiple messages have this Message-ID (diff)
From: Jerome Brunet <jbrunet@baylibre.com>
To: Kevin Hilman <khilman@baylibre.com>
Cc: linux-amlogic@lists.infradead.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	Jerome Brunet <jbrunet@baylibre.com>
Subject: [PATCH 2/6] arm64: dts: meson-gx: add aiu support
Date: Tue, 21 Apr 2020 18:39:31 +0200	[thread overview]
Message-ID: <20200421163935.775935-3-jbrunet@baylibre.com> (raw)
In-Reply-To: <20200421163935.775935-1-jbrunet@baylibre.com>

Add the AIU audio device to the Amlogic GX SoC family DT.
ATM, this device provides the i2s and spdif output stages and also
the hdmi and internal codec glues.

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
---
 arch/arm64/boot/dts/amlogic/meson-gx.dtsi   | 13 ++++++++++++
 arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi | 23 +++++++++++++++++++++
 arch/arm64/boot/dts/amlogic/meson-gxl.dtsi  | 23 +++++++++++++++++++++
 3 files changed, 59 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
index 03f79fe045b7..a8dc8f810253 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
@@ -278,6 +278,17 @@ reset: reset-controller@4404 {
 				#reset-cells = <1>;
 			};
 
+			aiu: audio-controller@5400 {
+				compatible = "amlogic,aiu";
+				#sound-dai-cells = <2>;
+				sound-name-prefix = "AIU";
+				reg = <0x0 0x5400 0x0 0x2ac>;
+				interrupts = <GIC_SPI 48 IRQ_TYPE_EDGE_RISING>,
+					     <GIC_SPI 50 IRQ_TYPE_EDGE_RISING>;
+				interrupt-names = "i2s", "spdif";
+				status = "disabled";
+			};
+
 			uart_A: serial@84c0 {
 				compatible = "amlogic,meson-gx-uart";
 				reg = <0x0 0x84c0 0x0 0x18>;
@@ -626,6 +637,8 @@ hdmi_tx: hdmi-tx@c883a000 {
 			interrupts = <GIC_SPI 57 IRQ_TYPE_EDGE_RISING>;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			#sound-dai-cells = <0>;
+			sound-name-prefix = "HDMITX";
 			status = "disabled";
 
 			/* VPU VENC Input */
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
index 0cb40326b0d3..234490d3ee68 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
@@ -60,6 +60,29 @@ usb1: usb@c9100000 {
 	};
 };
 
+&aiu {
+	compatible = "amlogic,aiu-gxbb", "amlogic,aiu";
+	clocks = <&clkc CLKID_AIU_GLUE>,
+		 <&clkc CLKID_I2S_OUT>,
+		 <&clkc CLKID_AOCLK_GATE>,
+		 <&clkc CLKID_CTS_AMCLK>,
+		 <&clkc CLKID_MIXER_IFACE>,
+		 <&clkc CLKID_IEC958>,
+		 <&clkc CLKID_IEC958_GATE>,
+		 <&clkc CLKID_CTS_MCLK_I958>,
+		 <&clkc CLKID_CTS_I958>;
+	clock-names = "pclk",
+		      "i2s_pclk",
+		      "i2s_aoclk",
+		      "i2s_mclk",
+		      "i2s_mixer",
+		      "spdif_pclk",
+		      "spdif_aoclk",
+		      "spdif_mclk",
+		      "spdif_mclk_sel";
+	resets = <&reset RESET_AIU>;
+};
+
 &aobus {
 	pinctrl_aobus: pinctrl@14 {
 		compatible = "amlogic,meson-gxbb-aobus-pinctrl";
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
index 259d86399390..d9f00c5a9a5c 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
@@ -49,6 +49,29 @@ crypto: crypto@c883e000 {
 	};
 };
 
+&aiu {
+	compatible = "amlogic,aiu-gxl", "amlogic,aiu";
+	clocks = <&clkc CLKID_AIU_GLUE>,
+		 <&clkc CLKID_I2S_OUT>,
+		 <&clkc CLKID_AOCLK_GATE>,
+		 <&clkc CLKID_CTS_AMCLK>,
+		 <&clkc CLKID_MIXER_IFACE>,
+		 <&clkc CLKID_IEC958>,
+		 <&clkc CLKID_IEC958_GATE>,
+		 <&clkc CLKID_CTS_MCLK_I958>,
+		 <&clkc CLKID_CTS_I958>;
+	clock-names = "pclk",
+		      "i2s_pclk",
+		      "i2s_aoclk",
+		      "i2s_mclk",
+		      "i2s_mixer",
+		      "spdif_pclk",
+		      "spdif_aoclk",
+		      "spdif_mclk",
+		      "spdif_mclk_sel";
+	resets = <&reset RESET_AIU>;
+};
+
 &apb {
 	usb2_phy0: phy@78000 {
 		compatible = "amlogic,meson-gxl-usb2-phy";
-- 
2.25.2


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

  parent reply	other threads:[~2020-04-21 16:40 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-04-21 16:39 [PATCH 0/6] arm64: dts: meson-gx: add initial playback support Jerome Brunet
2020-04-21 16:39 ` Jerome Brunet
2020-04-21 16:39 ` [PATCH 1/6] arm64: defconfig: enable meson gx audio as module Jerome Brunet
2020-04-21 16:39   ` Jerome Brunet
2020-04-21 16:39 ` Jerome Brunet [this message]
2020-04-21 16:39   ` [PATCH 2/6] arm64: dts: meson-gx: add aiu support Jerome Brunet
2020-04-22 13:12   ` Neil Armstrong
2020-04-22 13:12     ` Neil Armstrong
2020-04-22 14:38     ` Jerome Brunet
2020-04-22 14:38       ` Jerome Brunet
2020-04-21 16:39 ` [PATCH 3/6] arm64: dts: meson: p230-q200: add initial audio playback support Jerome Brunet
2020-04-21 16:39   ` Jerome Brunet
2020-04-21 16:39 ` [PATCH 4/6] arm64: dts: meson: libretech-cc: " Jerome Brunet
2020-04-21 16:39   ` Jerome Brunet
2020-04-21 16:39 ` [PATCH 5/6] arm64: dts: meson: libretech-ac: " Jerome Brunet
2020-04-21 16:39   ` Jerome Brunet
2020-04-21 16:39 ` [PATCH 6/6] arm64: dts: meson: libretech-pc: " Jerome Brunet
2020-04-21 16:39   ` Jerome Brunet
2020-04-30  1:54 ` [PATCH 0/6] arm64: dts: meson-gx: add initial " Christian Hewitt
2020-04-30  1:54   ` Christian Hewitt
2020-04-30 14:54 ` Kevin Hilman
2020-04-30 14:54   ` Kevin Hilman
2020-04-30 20:01 ` patchwork-bot+linux-amlogic

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200421163935.775935-3-jbrunet@baylibre.com \
    --to=jbrunet@baylibre.com \
    --cc=devicetree@vger.kernel.org \
    --cc=khilman@baylibre.com \
    --cc=linux-amlogic@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.