From: Jagan Teki <jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org> To: Kever Yang <kever.yang-TNX95d0MmH7DzftRWevZcw@public.gmane.org>, Simon Glass <sjg-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>, Philipp Tomsich <philipp.tomsich-SN7IsUiht6C/RdPyistoZJqQE7yCjDx5@public.gmane.org> Cc: linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, u-boot-0aAXYlwwYIKGBzrmiIFOJg@public.gmane.org, Peter Robinson <pbrobinson-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>, sunil-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org, linux-amarula-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org, Jagan Teki <jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org> Subject: [PATCH 1/6] arm64: dts: rk3399-puma: Move u-boot properties into -u-boot.dtsi Date: Sat, 25 Apr 2020 16:23:14 +0530 [thread overview] Message-ID: <20200425105319.12009-2-jagan@amarulasolutions.com> (raw) In-Reply-To: <20200425105319.12009-1-jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org> Move U-Boot specific properties into rk3399-puma u-boot specific dtsi file. This would help to sync the devicetrees from Linux whenever required instead of adding specific nodes. Cc: Peter Robinson <pbrobinson-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> Signed-off-by: Jagan Teki <jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org> --- arch/arm/dts/rk3399-puma-u-boot.dtsi | 16 ++++++++++++++++ arch/arm/dts/rk3399-puma.dtsi | 11 ----------- 2 files changed, 16 insertions(+), 11 deletions(-) diff --git a/arch/arm/dts/rk3399-puma-u-boot.dtsi b/arch/arm/dts/rk3399-puma-u-boot.dtsi index 52f62b5d39..e664779227 100644 --- a/arch/arm/dts/rk3399-puma-u-boot.dtsi +++ b/arch/arm/dts/rk3399-puma-u-boot.dtsi @@ -22,3 +22,19 @@ }; }; + +&bios_enable { + u-boot,dm-pre-reloc; +}; + +&gpio1 { + u-boot,dm-pre-reloc; +}; + +&gpio3 { + u-boot,dm-pre-reloc; +}; + +&spiflash { + u-boot,dm-pre-reloc; +}; diff --git a/arch/arm/dts/rk3399-puma.dtsi b/arch/arm/dts/rk3399-puma.dtsi index 558b6337df..246a892cb7 100644 --- a/arch/arm/dts/rk3399-puma.dtsi +++ b/arch/arm/dts/rk3399-puma.dtsi @@ -91,7 +91,6 @@ */ bios_enable: bios_enable { compatible = "regulator-fixed"; - u-boot,dm-pre-reloc; regulator-name = "bios_enable"; enable-active-high; gpio = <&gpio3 RK_PD5 GPIO_ACTIVE_LOW>; @@ -520,14 +519,6 @@ status = "okay"; }; -&gpio1 { - u-boot,dm-pre-reloc; -}; - -&gpio3 { - u-boot,dm-pre-reloc; -}; - &pinctrl { /* Pins that are not explicitely used by any devices */ pinctrl-names = "default"; @@ -633,8 +624,6 @@ #size-cells = <0>; spiflash: w25q32dw@0 { - u-boot,dm-pre-reloc; - compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <49500000>; -- 2.17.1
WARNING: multiple messages have this Message-ID (diff)
From: Jagan Teki <jagan@amarulasolutions.com> To: u-boot@lists.denx.de Subject: [PATCH 1/6] arm64: dts: rk3399-puma: Move u-boot properties into -u-boot.dtsi Date: Sat, 25 Apr 2020 16:23:14 +0530 [thread overview] Message-ID: <20200425105319.12009-2-jagan@amarulasolutions.com> (raw) In-Reply-To: <20200425105319.12009-1-jagan@amarulasolutions.com> Move U-Boot specific properties into rk3399-puma u-boot specific dtsi file. This would help to sync the devicetrees from Linux whenever required instead of adding specific nodes. Cc: Peter Robinson <pbrobinson@gmail.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> --- arch/arm/dts/rk3399-puma-u-boot.dtsi | 16 ++++++++++++++++ arch/arm/dts/rk3399-puma.dtsi | 11 ----------- 2 files changed, 16 insertions(+), 11 deletions(-) diff --git a/arch/arm/dts/rk3399-puma-u-boot.dtsi b/arch/arm/dts/rk3399-puma-u-boot.dtsi index 52f62b5d39..e664779227 100644 --- a/arch/arm/dts/rk3399-puma-u-boot.dtsi +++ b/arch/arm/dts/rk3399-puma-u-boot.dtsi @@ -22,3 +22,19 @@ }; }; + +&bios_enable { + u-boot,dm-pre-reloc; +}; + +&gpio1 { + u-boot,dm-pre-reloc; +}; + +&gpio3 { + u-boot,dm-pre-reloc; +}; + +&spiflash { + u-boot,dm-pre-reloc; +}; diff --git a/arch/arm/dts/rk3399-puma.dtsi b/arch/arm/dts/rk3399-puma.dtsi index 558b6337df..246a892cb7 100644 --- a/arch/arm/dts/rk3399-puma.dtsi +++ b/arch/arm/dts/rk3399-puma.dtsi @@ -91,7 +91,6 @@ */ bios_enable: bios_enable { compatible = "regulator-fixed"; - u-boot,dm-pre-reloc; regulator-name = "bios_enable"; enable-active-high; gpio = <&gpio3 RK_PD5 GPIO_ACTIVE_LOW>; @@ -520,14 +519,6 @@ status = "okay"; }; -&gpio1 { - u-boot,dm-pre-reloc; -}; - -&gpio3 { - u-boot,dm-pre-reloc; -}; - &pinctrl { /* Pins that are not explicitely used by any devices */ pinctrl-names = "default"; @@ -633,8 +624,6 @@ #size-cells = <0>; spiflash: w25q32dw at 0 { - u-boot,dm-pre-reloc; - compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <49500000>; -- 2.17.1
next prev parent reply other threads:[~2020-04-25 10:53 UTC|newest] Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top 2020-04-25 10:53 [PATCH 0/6] rk3399: Sync linux v5.7-rc1 dts(i) Jagan Teki 2020-04-25 10:53 ` Jagan Teki [not found] ` <20200425105319.12009-1-jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org> 2020-04-25 10:53 ` Jagan Teki [this message] 2020-04-25 10:53 ` [PATCH 1/6] arm64: dts: rk3399-puma: Move u-boot properties into -u-boot.dtsi Jagan Teki 2020-04-25 10:53 ` [PATCH 2/6] arm64: dts: rk3399-evb: " Jagan Teki 2020-04-25 10:53 ` Jagan Teki 2020-04-25 10:53 ` [PATCH 3/6] clk: rk3399: Set empty for HCLK_SD assigned-clocks Jagan Teki 2020-04-25 10:53 ` Jagan Teki 2020-04-25 10:53 ` [PATCH 4/6] arm64: dts: rk3399: Sync v5.7-rc1 from Linux Jagan Teki 2020-04-25 10:53 ` Jagan Teki 2020-04-25 10:53 ` [PATCH 5/6] arm: dts: rk3399: Sync roc-pc-mezzanine from v5.7-rc1 Jagan Teki 2020-04-25 10:53 ` Jagan Teki 2020-04-25 10:53 ` [PATCH 6/6] rk3399: Add ROC-RK3399-PC Mezzanine board Jagan Teki 2020-04-25 10:53 ` Jagan Teki
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20200425105319.12009-2-jagan@amarulasolutions.com \ --to=jagan-dyjbcgdgk7pe9whmmfpqlfatqe2ktcn/@public.gmane.org \ --cc=kever.yang-TNX95d0MmH7DzftRWevZcw@public.gmane.org \ --cc=linux-amarula-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org \ --cc=linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \ --cc=pbrobinson-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \ --cc=philipp.tomsich-SN7IsUiht6C/RdPyistoZJqQE7yCjDx5@public.gmane.org \ --cc=sjg-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org \ --cc=sunil-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org \ --cc=u-boot-0aAXYlwwYIKGBzrmiIFOJg@public.gmane.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.